Difference between revisions of "Technics SE-9600"
| (11 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Technics]] |
| − | * | + | * Model: SE-9600 |
| − | * | + | * Type: Stereo power amplifier |
| − | * | + | * Years of manufacture: 1975 - 1980 |
| − | * | + | * Made in: Japan |
| − | + | * Color: Black | |
| − | * | + | * Power consumption: max. 960 W |
| − | * | + | * Dimensions: 450 x 193 x 426 mm (WxHxD) |
| − | * | + | * Weight: approx. 25 kg |
| − | * | + | * Original price approx.: 3'200 DM (1977) |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
| − | ** Main In: 1V / | + | ** Main In: 1V / 40kOhm |
| − | * | + | * Number of outputs: |
| − | ** 2 | + | ** 2 speaker pairs |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Continuous power (20-20,000Hz) |
| − | ** | + | ** 8 Ohm: 2x 110W |
| − | + | 4 Ohm: 2x 165W | |
| − | * | + | * Dynamic power |
| − | ** | + | ** 8 Ohm: |
| − | ** | + | ** 4 Ohm: |
| − | * | + | * Total harmonic distortion: 0.08%. |
| − | * | + | * Attenuation factor: 100 / 10 / 30 / 1 (related to 8Ω-load (loudspeaker), 4-stage switchable). |
| − | * | + | * Frequency response: 5 - 150,000Hz (+0/-3dB). |
| − | * | + | * Signal-to-noise ratio: |
| − | * | + | * Signal-to-noise ratio: 110dB (at rated power). |
| − | |||
| − | ''' | + | '''Special Features''' |
| − | * | + | * Attenuation factor switchable in 4 steps! |
| − | * | + | * Signal input switchable on the front side |
| − | * | + | * Signal output A + B switchable on the front side |
| − | * | + | * Channel-separated input level control |
| − | * | + | * Headphone output |
| − | * | + | * Analog output power display 3-stage switchable and disengageable |
| − | * | + | * Color dot warning on heat dissipation blocks of power transistors (color change from yellow to red at >65°C) |
| − | * | + | * Automatic switch-off at 90°C |
| − | * | + | * Protection circuits for DC voltage, short circuit, overtemperature |
| − | * | + | * After power on, time delay of the power output via relay (Anti-Plopp) |
| − | * | + | * Two mains sockets of American standard with continuous current on the rear of the unit |
| − | == | + | == Remarks == |
| − | * | + | * Other models of the same series: |
| − | + | * [[Technics SU-8600]] | |
| − | + | * [[Technics SU-9600]] | |
| − | + | * [[Technics SE-9600]] | |
| − | + | * [[Technics ST-9600]] | |
| − | + | * [[Technics SH-9090]] | |
| − | + | * [[Technics RS-678 US]] | |
| − | + | * [[Technics RS-7500 US]] | |
| + | * [[Technics RS-9900 US]] | ||
| − | == | + | == Pictures == |
| − | + | * Pictures: Technics SE-9600 | |
| − | + | [[File:Technics SE-9600-1.jpg]] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | == | + | [[File:Technics SE-9600-5.jpg]] |
| + | |||
| + | |||
| + | == Reports == | ||
| Line 78: | Line 76: | ||
| − | [[ | + | [[Category:Power Amplifiers]] |
Latest revision as of 09:38, 13 June 2019
Data[edit]
General
- Manufacturer: Technics
- Model: SE-9600
- Type: Stereo power amplifier
- Years of manufacture: 1975 - 1980
- Made in: Japan
- Color: Black
- Power consumption: max. 960 W
- Dimensions: 450 x 193 x 426 mm (WxHxD)
- Weight: approx. 25 kg
- Original price approx.: 3'200 DM (1977)
Connections
- Number of inputs:
- Main In: 1V / 40kOhm
- Number of outputs:
- 2 speaker pairs
Technical Data
- Continuous power (20-20,000Hz)
- 8 Ohm: 2x 110W
4 Ohm: 2x 165W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.08%.
- Attenuation factor: 100 / 10 / 30 / 1 (related to 8Ω-load (loudspeaker), 4-stage switchable).
- Frequency response: 5 - 150,000Hz (+0/-3dB).
- Signal-to-noise ratio:
- Signal-to-noise ratio: 110dB (at rated power).
Special Features
- Attenuation factor switchable in 4 steps!
- Signal input switchable on the front side
- Signal output A + B switchable on the front side
- Channel-separated input level control
- Headphone output
- Analog output power display 3-stage switchable and disengageable
- Color dot warning on heat dissipation blocks of power transistors (color change from yellow to red at >65°C)
- Automatic switch-off at 90°C
- Protection circuits for DC voltage, short circuit, overtemperature
- After power on, time delay of the power output via relay (Anti-Plopp)
- Two mains sockets of American standard with continuous current on the rear of the unit
Remarks[edit]
- Other models of the same series:
- Technics SU-8600
- Technics SU-9600
- Technics SE-9600
- Technics ST-9600
- Technics SH-9090
- Technics RS-678 US
- Technics RS-7500 US
- Technics RS-9900 US
Pictures[edit]
- Pictures: Technics SE-9600
