Difference between revisions of "Kenwood KM-4002"
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: Trio [[Kenwood]] |
| − | * | + | * Model: KM-4002 |
| − | * | + | * Years of manufacture: 1970 - 1973 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: Silver |
| − | * | + | * Type: Stereo power amplifier analog |
| − | * | + | * Remote control: no |
| − | * | + | * Power consumption: 120 W full scale, 18 W without signal |
| − | * | + | * Dimensions (WxHxD): 253 x 134 x 280 mm |
| − | * | + | * Weight: 4,5 kg |
| − | * | + | * Original price approx.: 22800 Yen (Japan, 1970), corresponds to about 300 DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: 2, switchable |
| − | + | Input sensitivity 1, 2: 100mV/100kOhm, 1V/100kOhm, switchable, max. input signal 4V | |
| − | * | + | * Number of outputs: |
| − | ** 2 | + | ** 2 speaker pairs |
| − | ** | + | ** headphones |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Continuous power (at distortion) |
** 8 Ohm: 2 x 18W RMS | ** 8 Ohm: 2 x 18W RMS | ||
** 4 Ohm: 2 x 22W (1 kHz) | ** 4 Ohm: 2 x 22W (1 kHz) | ||
| − | * | + | * Dynamic power |
** 8 Ohm: 55W IHF | ** 8 Ohm: 55W IHF | ||
** 4 Ohm: 70W IHF | ** 4 Ohm: 70W IHF | ||
| − | * | + | * Total harmonic distortion: 0.5% |
| − | * | + | * Attenuation factor: 30 / 8 Ohm, 60 / 16 Ohm |
| − | * | + | * Frequency response: 15 Hz - 50 kHz |
| − | * | + | * Power bandwidth: 15 Hz - 70 kHz |
| − | * | + | * Signal to noise ratio: |
| − | * | + | * Stereo Channel Separation: |
| − | * Low Filter: 20 Hz | + | * Low Filter: 20 Hz cutoff at 12 dB/octave. |
| − | ''' | + | '''Special Features''' |
| − | * Kenwood | + | * Kenwood recommended the power amplifier as an additional amplifier for the rear speakers of a system, this for example in combination with the Quadrixer KN-7044. |
| − | == | + | == Comments == |
| − | * | + | * Other models of the same series: |
| − | ** Kenwood | + | ** Kenwood KM-4002 power amplifier |
*** [[Kenwood KM-4002|KM-4002]] | *** [[Kenwood KM-4002|KM-4002]] | ||
| − | ** Kenwood | + | ** Kenwood power amplifier M-6000 |
*** [[Kenwood M-6000|M-6000]] | *** [[Kenwood M-6000|M-6000]] | ||
| − | ** Kenwood | + | ** Kenwood KM-8002 power amplifier |
*** [[Kenwood KM-8002|KM-8002]] | *** [[Kenwood KM-8002|KM-8002]] | ||
| − | Kenwood | + | Kenwood recommended the Quadrixer for this purpose: |
| − | * Kenwood KN-7044 | + | * [[Kenwood KN-7044 |
** [[Kenwood KN-7044|KN-7044]] | ** [[Kenwood KN-7044|KN-7044]] | ||
| − | == | + | == Pictures == |
| − | * Kenwood | + | * Kenwood KM-4002 power amplifier: |
[[Datei:KM-4002-1.jpg]] | [[Datei:KM-4002-1.jpg]] | ||
| − | == | + | == Reports == |
== Links == | == Links == | ||
| − | * | + | * External link on website "Audio Heritage, Japan": [[http://audio-heritage.jp/TRIO-KENWOOD/amp/km-4002.html]] |
| − | [[ | + | [[Category:Power Amplifiers]] |
Latest revision as of 12:34, 7 February 2018
Contents
Data[edit]
General
- Manufacturer: Trio Kenwood
- Model: KM-4002
- Years of manufacture: 1970 - 1973
- Made in: Japan
- Color: Silver
- Type: Stereo power amplifier analog
- Remote control: no
- Power consumption: 120 W full scale, 18 W without signal
- Dimensions (WxHxD): 253 x 134 x 280 mm
- Weight: 4,5 kg
- Original price approx.: 22800 Yen (Japan, 1970), corresponds to about 300 DM
Connections
- Number of inputs: 2, switchable
Input sensitivity 1, 2: 100mV/100kOhm, 1V/100kOhm, switchable, max. input signal 4V
- Number of outputs:
- 2 speaker pairs
- headphones
Technical Data
- Continuous power (at distortion)
- 8 Ohm: 2 x 18W RMS
- 4 Ohm: 2 x 22W (1 kHz)
- Dynamic power
- 8 Ohm: 55W IHF
- 4 Ohm: 70W IHF
- Total harmonic distortion: 0.5%
- Attenuation factor: 30 / 8 Ohm, 60 / 16 Ohm
- Frequency response: 15 Hz - 50 kHz
- Power bandwidth: 15 Hz - 70 kHz
- Signal to noise ratio:
- Stereo Channel Separation:
- Low Filter: 20 Hz cutoff at 12 dB/octave.
Special Features
- Kenwood recommended the power amplifier as an additional amplifier for the rear speakers of a system, this for example in combination with the Quadrixer KN-7044.
Comments[edit]
- Other models of the same series:
Kenwood recommended the Quadrixer for this purpose:
- [[Kenwood KN-7044
Pictures[edit]
- Kenwood KM-4002 power amplifier:
Reports[edit]
Links[edit]
- External link on website "Audio Heritage, Japan": [[1]]