Difference between revisions of "Kenwood KM-8002"
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Kenwood]] |
| − | * | + | * Model: KM-8002 |
| − | * | + | * Years of manufacture: 1970 - 1973 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: Silver, wood side panels |
| − | * | + | * Type: Stereo power amplifier analog |
| − | * | + | * Remote control: no |
| − | * | + | * Power consumption: 300 W full scale, 12.5 W without signal |
| − | * | + | * Dimensions (WxHxD): 390 x 133 x 267 mm |
| − | * | + | * Weight: 10 kg |
| − | * | + | * Original price approx.: 210 US-$ (USA, 1970), corresponds to approx. 800 DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: 2, switchable |
| − | + | input sensitivity 1, 2: 100mV/50kOhm, 1V/50kOhm, switchable, max. input signal 4V | |
| − | * | + | * Number of outputs: |
| − | ** 3 | + | ** 3 speaker pairs |
| − | ** | + | ** headphones |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Continuous power (at distortion factor) |
** 8 Ohm: 2 x 55W RMS | ** 8 Ohm: 2 x 55W RMS | ||
** 4 Ohm: 2 x 70W (1 kHz) | ** 4 Ohm: 2 x 70W (1 kHz) | ||
| − | * | + | * Dynamic power |
** 8 Ohm: 170W IHF | ** 8 Ohm: 170W IHF | ||
| − | + | 4 Ohm: 220W IHF | |
| − | * | + | * Total harmonic distortion: 0.3% |
| − | * | + | * Attenuation factor: 45 / 8Ohm, 90 / 16 Ohm |
| − | * | + | * Frequency response: 20 Hz - 50 kHz |
| − | * | + | * Signal to noise ratio: 77 dB |
| − | * | + | * Stereo channel separation: |
| − | * Low Filter: 20 Hz | + | * Low Filter: 20 Hz cutoff with 12 dB/octave |
| − | ''' | + | '''Special Features''' |
| − | * Kenwood | + | * Kenwood recommended the power amplifier as an additional amplifier for the rear speakers of a system, this for example in combination with the Quadrixer KN-7044. |
| − | * Reverse | + | * Reverse phase switch for L + R separately |
| + | * Monitor output | ||
| − | == | + | == Remarks == |
| − | * | + | * Other models in the same series: |
| − | ** Kenwood | + | ** Kenwood KM-4002 power amplifier |
| − | *** [[Kenwood KM- | + | *** [[Kenwood KM-4002|KM-4002]] |
| − | ** Kenwood | + | ** Kenwood power amplifier M-6000 |
*** [[Kenwood M-6000|M-6000]] | *** [[Kenwood M-6000|M-6000]] | ||
| − | ** Kenwood | + | ** Kenwood KM-8002 power amplifier |
*** [[Kenwood KM-8002|KM-8002]] | *** [[Kenwood KM-8002|KM-8002]] | ||
| − | Kenwood | + | Kenwood recommended the Quadrixer for this purpose: |
| − | * Kenwood KN-7044 | + | * [[Kenwood KN-7044 |
** [[Kenwood KN-7044|KN-7044]] | ** [[Kenwood KN-7044|KN-7044]] | ||
| − | == | + | == Pictures == |
| − | * Kenwood | + | * Kenwood KM-8002 power amplifier: |
| − | [[ | + | [[File:KM-8002-5.jpg]] |
| − | * Kenwood | + | * Kenwood power amplifier KM-8002: |
| − | [[ | + | [[File:KM-8002-7.jpg]] |
| − | * Kenwood | + | * Kenwood Special Prospectus Excerpt: |
| − | [[ | + | [[File:KM-8002-Prospekt-4.jpg]] |
| − | == | + | * Extract from brochure: Trio Kenwood ATC Concept |
| + | [[File:KM-8002-5.jpg]] | ||
| + | |||
| + | |||
| + | == Reports == | ||
== Links == | == Links == | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | [[ | + | [[Category:Power Amplifiers]] |
Latest revision as of 06:40, 9 February 2018
Contents
Data[edit]
General
- Manufacturer: Kenwood
- Model: KM-8002
- Years of manufacture: 1970 - 1973
- Made in: Japan
- Color: Silver, wood side panels
- Type: Stereo power amplifier analog
- Remote control: no
- Power consumption: 300 W full scale, 12.5 W without signal
- Dimensions (WxHxD): 390 x 133 x 267 mm
- Weight: 10 kg
- Original price approx.: 210 US-$ (USA, 1970), corresponds to approx. 800 DM
Connections
- Number of inputs: 2, switchable
input sensitivity 1, 2: 100mV/50kOhm, 1V/50kOhm, switchable, max. input signal 4V
- Number of outputs:
- 3 speaker pairs
- headphones
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2 x 55W RMS
- 4 Ohm: 2 x 70W (1 kHz)
- Dynamic power
- 8 Ohm: 170W IHF
4 Ohm: 220W IHF
- Total harmonic distortion: 0.3%
- Attenuation factor: 45 / 8Ohm, 90 / 16 Ohm
- Frequency response: 20 Hz - 50 kHz
- Signal to noise ratio: 77 dB
- Stereo channel separation:
- Low Filter: 20 Hz cutoff with 12 dB/octave
Special Features
- Kenwood recommended the power amplifier as an additional amplifier for the rear speakers of a system, this for example in combination with the Quadrixer KN-7044.
- Reverse phase switch for L + R separately
- Monitor output
Remarks[edit]
- Other models in the same series:
Kenwood recommended the Quadrixer for this purpose:
- [[Kenwood KN-7044
Pictures[edit]
- Kenwood KM-8002 power amplifier:
- Kenwood power amplifier KM-8002:
- Kenwood Special Prospectus Excerpt:
- Extract from brochure: Trio Kenwood ATC Concept