Difference between revisions of "Kenwood KR-3090"
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KR-3090 |
− | * | + | Type: Receiver |
− | * | + | * Years of manufacture: 1978 - 1980 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 240 W |
− | * | + | * Dimensions: 468 x 140 x 348 mm (WxHxD) |
− | * | + | * Weight: 7.5 kg |
+ | * Original price approx.: 698 DM (1978) | ||
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono MM (Cinch): 2 | + | ** Phono MM (Cinch): 2.5 mV / 50 kOhm. |
− | + | 1x Tape In (Cinch/DIN): 150 mV / 45 kOhm | |
** Aux (Cinch): 150 mV / 45 kOhm | ** Aux (Cinch): 150 mV / 45 kOhm | ||
− | ** | + | ** Antenna FM (75/300 Ohm), AM |
− | * | + | * Number of outputs: |
** 1x Tape Out (Cinch/DIN): | ** 1x Tape Out (Cinch/DIN): | ||
− | ** | + | ** Headphones (6.3 mm jack, front) |
− | ** 2 | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power |
− | ** 8 Ohm: 2x 26 W (20-20 | + | ** 8 Ohm: 2x 26 W (20-20,000 Hz) |
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.05% (at rated power) |
− | * | + | * Attenuation Factor: |
− | * | + | * Frequency Response: |
− | ** | + | ** Power bandwidth: 10 - 50,000 Hz |
− | * | + | * Signal-to-noise ratio: (IHF-A) |
** Phono MM: 77 dB | ** Phono MM: 77 dB | ||
** AUX, Tape: 100 dB | ** AUX, Tape: 100 dB | ||
− | * | + | * Stereo Channel Separation: |
− | * | + | * Tone control: |
− | ** Bass: ±8 dB | + | ** Bass: ±8 dB at 100 Hz |
− | + | Treble: ±8 dB at 10 kHz | |
* Loudness: +10 dB (100 Hz) | * Loudness: +10 dB (100 Hz) | ||
− | * High Filter: | + | * High Filter: no |
− | * Low Filter (Subsonic): | + | * Low Filter (Subsonic): no |
− | |||
− | |||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
− | + | MW: 525 - 1605 kHz | |
− | * | + | * Frequency response: 20 - 15,000 Hz |
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 1.3 µV (IHF) |
− | + | MW: 20 µV | |
− | * | + | * Distortion factor: (1 kHz) |
− | ** | + | ** FM: 0.15% (mono), 0.3% (stereo) |
− | * | + | * Signal-to-noise ratio: (IHF-A) |
− | + | FM: 76 dB (mono), 72 dB (stereo) | |
+ | MW: 50 dB | ||
+ | * Channel separation: | ||
+ | ** FM: 40 dB (at 1 kHz). | ||
+ | * Selectivity: | ||
+ | ** FM: 54 dB | ||
+ | * Equal wave selection: | ||
+ | ** FM: 1.5 dB | ||
+ | * Spurious wave selection: | ||
+ | ** FM: 75 dB | ||
+ | * Image frequency attenuation: | ||
+ | ** FM: 60 dB | ||
** MW: 50 dB | ** MW: 50 dB | ||
− | + | IF attenuation: | |
− | + | ** FM: 90 dB | |
− | + | * AM suppression: 55 dB | |
− | + | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | ** | ||
− | |||
− | |||
− | * AM | ||
− | |||
− | |||
− | |||
+ | == Comments == | ||
+ | * Other models in the same series: | ||
+ | * [[Kenwood KR-2090]] | ||
+ | * [[Kenwood KR-3090]] | ||
+ | * [[Kenwood KR-4070]] | ||
+ | * [[Kenwood KR-5030]] | ||
+ | * [[Kenwood KR-6030]] | ||
+ | * [[Kenwood KR-8010]] | ||
− | |||
− | |||
+ | == Pictures == | ||
+ | * Extract from brochure: Kenwood KR-3090 | ||
+ | [[File:Kenwood KR-3090-Prospekt-1.jpg]] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | == | + | == Reports == |
− | |||
== Links == | == Links == | ||
− | [[ | + | |
+ | [[Category:Receiver]] |
Latest revision as of 06:08, 18 May 2019
Data[edit]
General
- Manufacturer: Kenwood
- Model: KR-3090
Type: Receiver
- Years of manufacture: 1978 - 1980
- Made in: Japan
- Color: Silver
- Remote control: no
- Power consumption: 240 W
- Dimensions: 468 x 140 x 348 mm (WxHxD)
- Weight: 7.5 kg
- Original price approx.: 698 DM (1978)
Connections
- Number of inputs:
- Phono MM (Cinch): 2.5 mV / 50 kOhm.
1x Tape In (Cinch/DIN): 150 mV / 45 kOhm
- Aux (Cinch): 150 mV / 45 kOhm
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- 1x Tape Out (Cinch/DIN):
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
- 8 Ohm: 2x 26 W (20-20,000 Hz)
- 4 Ohm:
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.05% (at rated power)
- Attenuation Factor:
- Frequency Response:
- Power bandwidth: 10 - 50,000 Hz
- Signal-to-noise ratio: (IHF-A)
- Phono MM: 77 dB
- AUX, Tape: 100 dB
- Stereo Channel Separation:
- Tone control:
- Bass: ±8 dB at 100 Hz
Treble: ±8 dB at 10 kHz
- Loudness: +10 dB (100 Hz)
- High Filter: no
- Low Filter (Subsonic): no
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 525 - 1605 kHz
- Frequency response: 20 - 15,000 Hz
- Input sensitivity:
- FM: 1.3 µV (IHF)
MW: 20 µV
- Distortion factor: (1 kHz)
- FM: 0.15% (mono), 0.3% (stereo)
- Signal-to-noise ratio: (IHF-A)
FM: 76 dB (mono), 72 dB (stereo) MW: 50 dB
- Channel separation:
- FM: 40 dB (at 1 kHz).
- Selectivity:
- FM: 54 dB
- Equal wave selection:
- FM: 1.5 dB
- Spurious wave selection:
- FM: 75 dB
- Image frequency attenuation:
- FM: 60 dB
- MW: 50 dB
IF attenuation:
- FM: 90 dB
- AM suppression: 55 dB
Comments[edit]
- Other models in the same series:
- Kenwood KR-2090
- Kenwood KR-3090
- Kenwood KR-4070
- Kenwood KR-5030
- Kenwood KR-6030
- Kenwood KR-8010
Pictures[edit]
- Extract from brochure: Kenwood KR-3090