Difference between revisions of "Onkyo K-611"

(Daten)
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
== Daten ==
+
== Data ==
{{Navigation}}
+
{{navigation}}
'''Allgemein'''
+
'''General'''
* Hersteller: [[Onkyo]]
+
* Manufacturer: [[Onkyo]]
* Modell: K-611
+
* Model: K-611, component of the complete system [[Onkyo Separate Collection]]
* Typ (Mono/Doppel):
+
* Type: Cassette Tape Deck
* Baujahre: 1993 - 1997
+
* Years of manufacture: 1993 - 1997
* Hergestellt in:
+
* Remote control: yes, system remote control (via the remote control of the amplifier or receiver, e.g. R-811, whereby a connection between the cassette deck and the amplifier or receiver must be established via a two-pin jack cable (3.5) for this to work)
* Farbe: schwarz oder silber
+
* New price approx.: 800 DM
* Fernbedienung: RI (über die Fernbedienung des Verstärkers oder Receivers, z.B. R-811, wobei hier über ein zweipoliges Klinkensteckerkabel (3,5) eine Verbindung zwischen Kassettendeck und Verstärker bzw. Receiver hergestellt werden muss, damit das funktioniert)
 
* Leistungsaufnahme: -
 
* Abmessungen: Midi Format, 270 mm breit
 
* Gewicht: -
 
* Neupreis ca.: -
 
  
'''Anschlüsse'''
+
 
* Anzahl der Eingänge: 2
+
'''Connections'''
 +
* Number of inputs: 2
 +
2 Cinch (R/L)
 +
* Number of outputs: 2
 
** 2 Cinch (R/L)
 
** 2 Cinch (R/L)
  
* Anzahl der Ausgänge: 2
+
 
** 2 Cinch (R/L)
+
'''Technical Data'''
 +
* Audio heads: 1x recording, 1x playback, 1x erasing head
 +
* Motors: 3 (double capstan drive)
 +
* Synchronization fluctuation: 0,045%
 +
* Tape types: Normal tape, Chrome tape, Metal tape
 +
* Frequency response:20-17,000 Hz, 20-18,000 Hz, 20-19,000 Hz.
 +
* Distortion factor:
 +
* Signal-to-noise ratio: 60 dB
 +
* Auto reverse: no
 +
* Title search: yes (AMCS)
 +
* Dolby: B/C
 +
* MPX filter: yes
 +
 
 +
 
 +
* More data at "Hifi Engine": [https://www.hifiengine.com/manual_library/onkyo/k-611.shtml]
 +
 
 +
 
 +
== Comments ==
 +
* Other models in the same series:
 +
* Amplifier:
 +
* [[Onkyo A-911]]
 +
 
 +
 
 +
* Tuner:
 +
* [[Onkyo T-409]]
 +
* [[Onkyo T-411 RDS]]
 +
 
 +
 
 +
* CD player:
 +
* [[Onkyo C-711]]
 +
* [[Onkyo C-722]]
 +
 
 +
 
 +
* Tape Deck:
 +
* [[Onkyo K-611]]
 +
* [[Onkyo K-R 609]]
 +
* [[Onkyo K-W 606]]
  
  
 +
* [[Surround Processor]]
 +
* [[Onkyo SR-211 PRO]]
  
'''Technische Daten'''
 
* Tonköpfe: 1x Aufnahme, 1x Wiedergabe, 1x Löschkopf
 
* Motoren: 3 (Doppel-Capstan-Antrieb)
 
* Gleichlaufschwankungen: 0,045%
 
* Bandarten: Normalband, Chromband, Metalband
 
* Frequenzgang:20-17.000 Hz, 20-18.000 Hz, 20-19.000 Hz
 
  
* Klirrfaktor:  
+
* Alternate components:
* Signalrauschabstand: 60 dB
+
* RDS Receiver:
 +
* [[Onkyo R-811 RDS]]
  
* Auto-Reverse: nein
 
* Titelsuchlauf: ja (AMCS)
 
* Dolby: B/C
 
* MPX-Filter: ja
 
* Fader: -
 
* Pitch-Kontrolle: -
 
* CD-Synchro-Aufnahme: -
 
  
== Besondere Ausstattungen ==
+
== Pictures ==
 +
* Picture: Onkyo K-611
 +
[[File:onkyo_k_611_front_closed.jpg]]
  
  
== Bemerkungen ==
+
* Picture: Onkyo K-611
Häufiger Fehler bei gebrauchten Geräten: Das Kassettenfach öffnet sich nach dem Schließen wieder von allein, ein Abspielen einer Kassette ist damit nicht mehr möglich. Grund dafür ist ein ausgeleierter Gummiriemen für den Motor, der die Kassettenklappe öffnet und schließt. Mit einem neuem Riemen arbeitet das Gerät wieder einwandfrei. Neue Riemen werden bei ebay angeboten. Das Wechseln des Riemens ist allerdings recht aufwändig, da das Laufwerk nach vorn ausgebaut und teilweise auseinander genommen werden muss um an den Riemen zu kommen.
+
[[File:onkyo_k_611_front_open.jpg]]
  
Weitere Modelle der gleichen Serie: K-622
 
-
 
  
== Bilder ==
+
== Reports ==
 +
* Report in "FonoForum" 8 / 1995
  
[[Datei:onkyo_k_611_front_closed.jpg]]<br />
 
<br />
 
  
[[Datei:onkyo_k_611_front_open.jpg]]<br />
+
* Frequent fault with used devices: The cassette compartment opens again by itself after closing, so playing a cassette is no longer possible. The reason for this is a worn-out rubber belt for the motor that opens and closes the cassette door. With a new belt, the unit will work properly again. New belts are offered on eBay. Changing the belt is quite time-consuming, because the drive has to be removed from the front and partly disassembled to get to the belt.
  
== Berichte ==
 
  
 
== Links ==
 
== Links ==
  
[[Kategorie:Kassettendecks]]
+
 
 +
[[Category:Cassette decks]]

Latest revision as of 04:37, 14 October 2020

Data[edit]

General

  • Manufacturer: Onkyo
  • Model: K-611, component of the complete system Onkyo Separate Collection
  • Type: Cassette Tape Deck
  • Years of manufacture: 1993 - 1997
  • Remote control: yes, system remote control (via the remote control of the amplifier or receiver, e.g. R-811, whereby a connection between the cassette deck and the amplifier or receiver must be established via a two-pin jack cable (3.5) for this to work)
  • New price approx.: 800 DM


Connections

  • Number of inputs: 2

2 Cinch (R/L)

  • Number of outputs: 2
    • 2 Cinch (R/L)


Technical Data

  • Audio heads: 1x recording, 1x playback, 1x erasing head
  • Motors: 3 (double capstan drive)
  • Synchronization fluctuation: 0,045%
  • Tape types: Normal tape, Chrome tape, Metal tape
  • Frequency response:20-17,000 Hz, 20-18,000 Hz, 20-19,000 Hz.
  • Distortion factor:
  • Signal-to-noise ratio: 60 dB
  • Auto reverse: no
  • Title search: yes (AMCS)
  • Dolby: B/C
  • MPX filter: yes


  • More data at "Hifi Engine": [1]


Comments[edit]

  • Other models in the same series:
  • Amplifier:
  • Onkyo A-911







Pictures[edit]

  • Picture: Onkyo K-611

Onkyo k 611 front closed.jpg


  • Picture: Onkyo K-611

Onkyo k 611 front open.jpg


Reports[edit]

  • Report in "FonoForum" 8 / 1995


  • Frequent fault with used devices: The cassette compartment opens again by itself after closing, so playing a cassette is no longer possible. The reason for this is a worn-out rubber belt for the motor that opens and closes the cassette door. With a new belt, the unit will work properly again. New belts are offered on eBay. Changing the belt is quite time-consuming, because the drive has to be removed from the front and partly disassembled to get to the belt.


Links[edit]