Difference between revisions of "Onkyo TA-W 30"
(→Daten) |
(→Daten) |
||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Onkyo]] |
− | * | + | * Model: TA-W30 |
− | * | + | * Years of manufacture: ca. |
− | * | + | * Made in: Japan |
− | * | + | * Type: Stereo double cassette deck |
− | * | + | * Remote control: No |
− | * | + | * Dimensions: 435 × 110 × 258 mm (W×H×D) |
− | * | + | * Weight: 4.6 kg |
− | * | + | * Color: black |
− | * | + | * Original price approx: |
− | * System: | + | |
− | * | + | * System: four-track / two-channel stereo |
− | * | + | * Erasure principle: HF- Erasure |
− | * Motor: 2x | + | * Tape speed: 4.8 cm / sec. |
− | * | + | * Motor: 2x brushless direct drive |
− | * | + | * Auxiliary motor: 2x DC |
− | * | + | * Drive type: Belt |
− | * | + | * Synchronous fluctuation: 0,07% /effective, evaluated) |
− | * | + | * Head assembly: sound head 2x hard permalloy ; erase head 1x ferrite. |
− | * Normal: 20 - 15 | + | * Frequency response: |
− | * High: | + | * Normal: 20 - 15,000Hz (30 - 14,000Hz +/- 3 dB). |
− | * Metal: | + | * High: 20 - 16.000Hz (30 - 15.000Hz +/- 3 dB) |
− | * | + | * Metal: 20 - 17,000Hz (30 - 16,000Hz +/- 3 dB) |
− | * | + | * Noise floor: |
− | * | + | * Without Dolby NR 58dB (Pure Iron). |
− | * | + | * With Dolby NR improvement of 10dB over 5kHz and 5dB at 1Hz |
− | * | + | * With Dolby-C NR improvement of 20dB at 5kHz. |
− | * 1x | + | * Inputs: |
− | + | * 1x Microphone Input Sensitivity 0.6 mV ; 600Ohm Input Impedance: 2.7kOhm. | |
− | + | 2x Line IN input sensitivity 60 mV ; input impedance: 2,7 kOhm | |
− | * 1x | + | 1x DIN jack input sensitivity 0.1 mV / 1kOhm; input impedance: 2.7kOhm |
− | + | * 1x headphone rec. termination impedance: 8 - 200 Ohm | |
− | + | 2x Line Out; nominal output level 500mV (0 dB)rec. termination impedance >50KOhm | |
− | * | + | 1x DIN socket normal output level 500mV empf. Termination impedance >50kOhm |
− | * | + | R1 Sockets |
+ | * Power consumption: 19Watt | ||
+ | * Mains connection: 220V / 50Hz | ||
− | == | + | '''Special Features''' |
+ | |||
+ | * Remote control via R1 cable | ||
+ | |||
+ | == Pictures == | ||
+ | http://www.hifi-wiki.de/images/thumb/1/1f/IMG_onkyota-w30.JPG/800px-IMG_onkyota-w30.JPG | ||
+ | |||
+ | http://www.hifi-wiki.de/images/thumb/2/29/IMG_onkyota-w30reuk.JPG/800px-IMG_onkyota-w30reuk.JPG |
Latest revision as of 10:55, 23 October 2016
Data[edit]
General
- Manufacturer: Onkyo
- Model: TA-W30
- Years of manufacture: ca.
- Made in: Japan
- Type: Stereo double cassette deck
- Remote control: No
- Dimensions: 435 × 110 × 258 mm (W×H×D)
- Weight: 4.6 kg
- Color: black
- Original price approx:
- System: four-track / two-channel stereo
- Erasure principle: HF- Erasure
- Tape speed: 4.8 cm / sec.
- Motor: 2x brushless direct drive
- Auxiliary motor: 2x DC
- Drive type: Belt
- Synchronous fluctuation: 0,07% /effective, evaluated)
- Head assembly: sound head 2x hard permalloy ; erase head 1x ferrite.
- Frequency response:
- Normal: 20 - 15,000Hz (30 - 14,000Hz +/- 3 dB).
- High: 20 - 16.000Hz (30 - 15.000Hz +/- 3 dB)
- Metal: 20 - 17,000Hz (30 - 16,000Hz +/- 3 dB)
- Noise floor:
- Without Dolby NR 58dB (Pure Iron).
- With Dolby NR improvement of 10dB over 5kHz and 5dB at 1Hz
- With Dolby-C NR improvement of 20dB at 5kHz.
- Inputs:
- 1x Microphone Input Sensitivity 0.6 mV ; 600Ohm Input Impedance: 2.7kOhm.
2x Line IN input sensitivity 60 mV ; input impedance: 2,7 kOhm 1x DIN jack input sensitivity 0.1 mV / 1kOhm; input impedance: 2.7kOhm
- 1x headphone rec. termination impedance: 8 - 200 Ohm
2x Line Out; nominal output level 500mV (0 dB)rec. termination impedance >50KOhm 1x DIN socket normal output level 500mV empf. Termination impedance >50kOhm R1 Sockets
- Power consumption: 19Watt
- Mains connection: 220V / 50Hz
Special Features
- Remote control via R1 cable
Pictures[edit]