Difference between revisions of "Kenwood KR-9400"
(18 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KR-9400 |
− | * | + | * Years of manufacture: 1974 - 1976 |
− | * | + | * Made in: Japan |
− | * | + | * Color: silver |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 750 W (max) |
− | * | + | * Dimensions: 557 x 166 x 344 mm (WxHxD) |
− | * | + | * Weight: 20,6 kg |
− | * | + | * Original price approx.: 2'918 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** | + | ** 2x Phono MM (Cinch): 2.5 mV / 50 kOhm |
− | * | + | 2x Tape In (Cinch/DIN): 150 mV / 80 kOhm |
− | ** | + | ** AUX (Cinch): 150 mV / 80 kOhm |
+ | ** Microphone: 2,5 mV / 50 kOhm | ||
+ | Dolby NR In | ||
+ | ** Antenna FM (75/300 Ohm), AM | ||
+ | * Number of outputs: | ||
+ | ** 2x Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN). | ||
+ | FM Quadradial | ||
+ | Dolby NR Out | ||
+ | ** Headphones (6.3 mm jack, front) | ||
+ | ** 3 pairs of loudspeakers | ||
− | ''' | + | '''Technical Specifications''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (20-20,000 Hz) |
+ | 8 Ohm: 2x 120 W | ||
+ | 4 Ohm: 2x 150 W | ||
+ | * Dynamic power | ||
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.1% (at nominal power) |
− | * | + | * Attenuation factor: 50 (8 Ohm) |
− | ** | + | * Frequency response: |
− | * | + | ** Preamplifier: 10 - 40,000 Hz (±1 dB). |
− | * | + | ** Power bandwidth: 5 - 40,000 Hz |
− | * | + | * Signal-to-noise ratio: |
− | * | + | ** Phono MM: 70 dB |
− | * | + | ** AUX, Tape: 90 dB |
− | * | + | ** Microphone: 65 dB |
− | ** Bass: | + | * Stereo channel separation: |
− | ** | + | * Tone control: |
− | * Loudness: | + | ** Bass: ±10 dB at 100 Hz |
− | * High Filter: | + | ** Mid: ±10 dB at 800 Hz |
− | * Low Filter (Subsonic): | + | Treble: ±10 dB at 10 kHz |
− | * Mute: | + | * Loudness: +8/+5 dB (100 Hz/10 kHz) |
− | * Direct/Line-Straight: | + | * High Filter: -5dB at 10 kHz |
+ | * Low Filter (Subsonic): -8 dB at 100 Hz | ||
+ | * Mute: FM muting | ||
+ | * Direct/Line-Straight: yes (Tone Defeat) | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
− | ** | + | MW: 525 - 1605 kHz |
− | * | + | * Frequency response: 20 - 15,000 Hz (+0.5/-1.5 dB, FM) |
− | * | + | * Input sensitivity: |
− | * | + | ** FM: 1.7 µV (IHF) |
− | * | + | MW: 15 µV |
− | * | + | Distortion factor: |
− | * | + | ** FM: 0.3% (mono), 0.5% (stereo). |
− | * | + | * Signal-to-noise ratio: |
− | * | + | ** FM: 68 dB (mono), 72 dB (stereo) |
− | * | + | MW: 60 dB |
− | * | + | * Channel separation: |
− | * AM | + | ** FM: 40 dB (at 1 kHz). |
− | * | + | * Selectivity: |
− | * | + | ** FM: 80 dB |
− | * | + | ** MW: 35 dB |
+ | * Equal wave selection: | ||
+ | ** FM: 1.3 dB | ||
+ | * Spurious wave selection: | ||
+ | ** FM: 90 dB | ||
+ | * Image frequency attenuation: | ||
+ | ** FM: 80 dB | ||
+ | ** MW: 70 dB | ||
+ | IF attenuation: | ||
+ | ** FM: 100 dB | ||
+ | ** MW: 70 dB | ||
+ | * AM suppression: 55 dB | ||
+ | |||
+ | |||
+ | '''Special Features''' | ||
+ | * Microphone Mixer | ||
+ | * FM Quadradial output | ||
+ | * Connectors for external Dolby device | ||
+ | * Output for oscilloscope V + H | ||
+ | |||
+ | |||
+ | == Remarks == | ||
+ | * Other models in the same series: | ||
+ | ** [[Kenwood KR-1400]] | ||
+ | ** [[Kenwood KR-2400]] | ||
+ | ** [[Kenwood KR-3400]] | ||
+ | ** [[Kenwood KR-4400]] | ||
+ | ** [[Kenwood KR-5400]] | ||
+ | ** [[Kenwood KR-6400]] | ||
+ | ** [[Kenwood KR-7400]] | ||
+ | ** [[Kenwood KR-9400]] | ||
+ | |||
+ | |||
+ | ** [[Kenwood KR-9400]] | ||
+ | ** [[Kenwood KF-8011 Denoiser]] | ||
+ | ** [[Kenwood KF-8011]] | ||
+ | ** Kenwood KC-6060 A oscilloscope | ||
+ | *** [[Kenwood KC-6060 A]] | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | * Image: Kenwood KR-9400 | ||
+ | [[Datei:Kenwood KR-9400-2.jpg|1000px]] | ||
+ | |||
+ | |||
+ | * Excerpt from brochure: Kenwood KR-9400 Interior | ||
+ | [[Datei:Kenwood KR-9400-Prospekt-5.jpg|1000px]] | ||
+ | |||
+ | * Excerpt from brochure: Kenwood KR-9400 back side | ||
+ | [[Datei:Kenwood KR-9400-Prospekt-7.jpg|1000px]] | ||
− | |||
− | |||
+ | * Excerpt from brochure: Kenwood KR-9400 | ||
+ | [[Datei:Kenwood KR-9400-Prospekt-2.jpg|1000px]] | ||
− | |||
− | |||
− | == | + | == Reports == |
− | |||
== Links == | == Links == | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 04:11, 3 July 2018
Data[edit]
General
- Manufacturer: Kenwood
- Model: KR-9400
- Years of manufacture: 1974 - 1976
- Made in: Japan
- Color: silver
- Remote control: no
- Power consumption: 750 W (max)
- Dimensions: 557 x 166 x 344 mm (WxHxD)
- Weight: 20,6 kg
- Original price approx.: 2'918 DM
Connections
- Number of inputs:
- 2x Phono MM (Cinch): 2.5 mV / 50 kOhm
2x Tape In (Cinch/DIN): 150 mV / 80 kOhm
- AUX (Cinch): 150 mV / 80 kOhm
- Microphone: 2,5 mV / 50 kOhm
Dolby NR In
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- 2x Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN).
FM Quadradial Dolby NR Out
- Headphones (6.3 mm jack, front)
- 3 pairs of loudspeakers
Technical Specifications
Amplifier
- Continuous power (20-20,000 Hz)
8 Ohm: 2x 120 W 4 Ohm: 2x 150 W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.1% (at nominal power)
- Attenuation factor: 50 (8 Ohm)
- Frequency response:
- Preamplifier: 10 - 40,000 Hz (±1 dB).
- Power bandwidth: 5 - 40,000 Hz
- Signal-to-noise ratio:
- Phono MM: 70 dB
- AUX, Tape: 90 dB
- Microphone: 65 dB
- Stereo channel separation:
- Tone control:
- Bass: ±10 dB at 100 Hz
- Mid: ±10 dB at 800 Hz
Treble: ±10 dB at 10 kHz
- Loudness: +8/+5 dB (100 Hz/10 kHz)
- High Filter: -5dB at 10 kHz
- Low Filter (Subsonic): -8 dB at 100 Hz
- Mute: FM muting
- Direct/Line-Straight: yes (Tone Defeat)
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 525 - 1605 kHz
- Frequency response: 20 - 15,000 Hz (+0.5/-1.5 dB, FM)
- Input sensitivity:
- FM: 1.7 µV (IHF)
MW: 15 µV Distortion factor:
- FM: 0.3% (mono), 0.5% (stereo).
- Signal-to-noise ratio:
- FM: 68 dB (mono), 72 dB (stereo)
MW: 60 dB
- Channel separation:
- FM: 40 dB (at 1 kHz).
- Selectivity:
- FM: 80 dB
- MW: 35 dB
- Equal wave selection:
- FM: 1.3 dB
- Spurious wave selection:
- FM: 90 dB
- Image frequency attenuation:
- FM: 80 dB
- MW: 70 dB
IF attenuation:
- FM: 100 dB
- MW: 70 dB
- AM suppression: 55 dB
Special Features
- Microphone Mixer
- FM Quadradial output
- Connectors for external Dolby device
- Output for oscilloscope V + H
Remarks[edit]
- Other models in the same series:
- Kenwood KR-9400
- Kenwood KF-8011 Denoiser
- Kenwood KF-8011
- Kenwood KC-6060 A oscilloscope
Pictures[edit]
- Image: Kenwood KR-9400
- Excerpt from brochure: Kenwood KR-9400 Interior
- Excerpt from brochure: Kenwood KR-9400 back side
- Excerpt from brochure: Kenwood KR-9400