Difference between revisions of "Ortofon HMC 30"
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Ortofon]] |
| − | * | + | * Model: HMC 30 |
| − | * | + | * Years of manufacture: |
| − | * | + | * Made in: Denmark |
| − | * | + | * Color: bronze |
| − | * | + | * Weight: 10 g |
| − | * | + | * Original price: approx. 725,- € (as of: 2016) |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Principle: Moving Coil (MC) |
| − | * | + | * Frequency response: 20 - 40,000 Hz |
| − | * | + | * Channel separation: > 27 dB at 1 kHz |
| − | * | + | * Channel balance: 0 < 1 dB bei 1 kHz |
* Übersprechdämpfung: | * Übersprechdämpfung: | ||
| − | * Ausgangsspannung: > | + | * Ausgangsspannung: >.5 mV |
| − | * | + | * Terminating resistor: > 20 Ohm |
| − | * | + | * Internal resistance (DC): 6 Ohm |
| − | * | + | * Needle type: Fritz Gyger 70 (r/R: 5/70 µm), naked on aluminium needle carrier |
| − | + | * Recommended contact force: 20 mN | |
| − | * | + | * Needle compliance: 14 µm/mN |
| − | * | + | * Scanning capability at 315 Hz: 80 µm |
| − | |||
| − | |||
| − | == | + | == Remarks == |
| + | * Coil material: pure silver | ||
| − | == | + | == Pictures == |
| + | |||
| + | == Reports == | ||
== Links == | == Links == | ||
| − | [[ | + | [[Category:Pickups]]</1> |
Latest revision as of 12:27, 15 February 2016
Data[edit]
General
- Manufacturer: Ortofon
- Model: HMC 30
- Years of manufacture:
- Made in: Denmark
- Color: bronze
- Weight: 10 g
- Original price: approx. 725,- € (as of: 2016)
Technical Data
- Principle: Moving Coil (MC)
- Frequency response: 20 - 40,000 Hz
- Channel separation: > 27 dB at 1 kHz
- Channel balance: 0 < 1 dB bei 1 kHz
- Übersprechdämpfung:
- Ausgangsspannung: >.5 mV
- Terminating resistor: > 20 Ohm
- Internal resistance (DC): 6 Ohm
- Needle type: Fritz Gyger 70 (r/R: 5/70 µm), naked on aluminium needle carrier
- Recommended contact force: 20 mN
- Needle compliance: 14 µm/mN
- Scanning capability at 315 Hz: 80 µm
Remarks[edit]
- Coil material: pure silver
Pictures[edit]
Reports[edit]
Links[edit]
</1>