Difference between revisions of "Thorens TD 115 MK II"
(→Daten) |
|||
| (7 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Thorens]] |
| − | * | + | * Model: TD 115 MK II |
| − | * | + | * Type: Turntable |
| − | * | + | * Years of manufacture: 1981 - 1984 |
| − | * | + | * Made in: Germany |
| − | * | + | * Color: Black or gray |
| − | * | + | * Power consumption: 5W |
| − | * | + | * Dimensions: 445 x 355 x 130 mm (WxDxH) |
| − | * | + | * Weight: 7 kg |
| + | * Original price approx.: 600 DM | ||
| − | ''' | + | '''Connections''' |
| − | + | Outputs: Connecting cable fixed (capacitance approx. 230pF) | |
| − | ''' | + | '''Technical data''' |
| − | * | + | * Drive: Belt |
| − | + | Motor: Direct current motor with 72-pole tachogenerator, elec. Comparator circuit (DC) | |
| − | * | + | * Speed: 33 1/3, 45, 78 rpm |
| − | * | + | * Synchronous running fluctuations: <= 0,045% according to DIN45507 |
| − | * | + | * Rumble noise ratio: 68dB according to DIN 45538 |
| − | * | + | * Turntable: zinc injection moulding, 300 mm, 1,3 kg |
| − | * | + | * Operating mode: selectable (manual, tonearm lift) |
* Pitch: ±6 % | * Pitch: ±6 % | ||
| − | * | + | * Tonearm: TP30 with end tube TP70 |
| − | ** - | + | ** - Effective length 222mm |
| − | ** - | + | ** - Effective mass 7,5g |
| − | ** - | + | ** - Overhang 15,5mm |
| − | ** - | + | ** - Offset angle 23 |
| − | ** - Max. | + | ** - Max. tangential toe angle error <0.18°/cm sound plate radius |
| − | ** - | + | ** - Bearing friction <= 0.15mN |
| + | '''Special Features''' | ||
| + | * Automatic optoelectrical end stop with lifting of the tone arm | ||
| + | * Stoboscope for fine speed adjustment integrated in the turntable | ||
| + | * Skating adjustment magnetic | ||
| + | * 2nd belt at platter bearing to compensate the queer forces by the drive belt | ||
| + | * Subchassis with 4-point ortho-inertial suspension | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | * | + | * Improvements to TD 115: |
| − | ** | + | ** different motor and motor control |
| − | ** | + | ** Tonearm base TP30 was set higher |
| − | ** | + | ** thicker rubber mat for better damping of the platter |
| − | ** | + | ** additional 78 rpm |
| − | == | + | == Remarks == |
| − | + | * Other models of the same series: | |
| + | * [[Thorens TD 115 MK II]] | ||
| + | * [[Thorens TD 126 MK III]] | ||
| + | * [[Thorens TD 127]] | ||
| + | * [[Thorens TD 226]] | ||
| − | == | + | == Pictures == |
| − | [[ | + | * [[Picture: Thorens TD 115 MK II |
| + | [[Image:Thorens_TD_115_MKII_1_1980_640.jpg]] | ||
| − | |||
| − | [[ | + | * Image: Thorens TD 115 MK II |
| + | [[Image:Thorens_TD_115_MKII_2_1980_640.jpg]] | ||
| + | |||
| + | |||
| + | * Excerpt from brochure: Thorens TD 115 MK II | ||
| + | [[File:Thorens TD-115 MK II-Prospekt-1.jpg]] | ||
| + | |||
| + | |||
| + | == Reports == | ||
| − | |||
== Links == | == Links == | ||
| − | [[ | + | |
| + | [[Category:Turntables]] | ||
Latest revision as of 01:07, 2 June 2020
Data[edit]
General
- Manufacturer: Thorens
- Model: TD 115 MK II
- Type: Turntable
- Years of manufacture: 1981 - 1984
- Made in: Germany
- Color: Black or gray
- Power consumption: 5W
- Dimensions: 445 x 355 x 130 mm (WxDxH)
- Weight: 7 kg
- Original price approx.: 600 DM
Connections
Outputs: Connecting cable fixed (capacitance approx. 230pF)
Technical data
- Drive: Belt
Motor: Direct current motor with 72-pole tachogenerator, elec. Comparator circuit (DC)
- Speed: 33 1/3, 45, 78 rpm
- Synchronous running fluctuations: <= 0,045% according to DIN45507
- Rumble noise ratio: 68dB according to DIN 45538
- Turntable: zinc injection moulding, 300 mm, 1,3 kg
- Operating mode: selectable (manual, tonearm lift)
- Pitch: ±6 %
- Tonearm: TP30 with end tube TP70
- - Effective length 222mm
- - Effective mass 7,5g
- - Overhang 15,5mm
- - Offset angle 23
- - Max. tangential toe angle error <0.18°/cm sound plate radius
- - Bearing friction <= 0.15mN
Special Features
- Automatic optoelectrical end stop with lifting of the tone arm
- Stoboscope for fine speed adjustment integrated in the turntable
- Skating adjustment magnetic
- 2nd belt at platter bearing to compensate the queer forces by the drive belt
- Subchassis with 4-point ortho-inertial suspension
- Improvements to TD 115:
- different motor and motor control
- Tonearm base TP30 was set higher
- thicker rubber mat for better damping of the platter
- additional 78 rpm
Remarks[edit]
- Other models of the same series:
- Thorens TD 115 MK II
- Thorens TD 126 MK III
- Thorens TD 127
- Thorens TD 226
Pictures[edit]
- [[Picture: Thorens TD 115 MK II
- Image: Thorens TD 115 MK II
- Excerpt from brochure: Thorens TD 115 MK II
