Difference between revisions of "Sony TA-F 445"

(Die Seite wurde neu angelegt: „Sony Vollverstärker mit MOSFET und Phonoteil '''Ausstattung, Anschlüsse und Techn. Daten:''' Diskret aufgebaute Endstufen mit hochwertigen MOSFET (MOS-Fel…“)
 
m
 
Line 1: Line 1:
Sony Vollverstärker mit MOSFET und Phonoteil
+
Sony integrated amplifier with MOSFET and phono section
  
'''Ausstattung, Anschlüsse und Techn. Daten:'''
+
'''Equipment, Connections and Technical Data:'''
  
     Diskret aufgebaute Endstufen mit hochwertigen MOSFET (MOS-Feldeffekt-Transistoren), d.h. kein Billig-Endstufen-IC wie bei der neuesten Verstärker-Generation
+
     Discretely constructed power amplifier with high-quality MOSFET (MOS field-effect transistors), i.e. no cheap power amplifier IC as in the latest amplifier generation
     Metallfront
+
     Metal front
     Eingänge für Phono, Tuner, CD, AUX, Tape1 / DAT, Tape2 / MD
+
     Inputs for Phono, Tuner, CD, AUX, Tape1 / DAT, Tape2 / MD
     Rec-Ausgänge: Tape1 / DAT, Tape2 / MD
+
     Rec outputs: Tape1 / DAT, Tape2 / MD
     3 schaltbare 230V-Steckdosen
+
     3 switchable 230V sockets
     Zwei Lautsprecherpaare anschließbar, A, B oder A+B schaltbar
+
     Two pairs of speakers connectable, A, B or A+B switchable
     Drehbarer Input-Selector
+
     Rotatable input selector
     Source Direct Schalter (Umgehen der Klangregelung)
+
     Source Direct switch (bypassing the tone control)
     Loudness (Anhebung Bässe und Höhen bei niedriger Lautstärke)
+
     Loudness (boost bass and treble at low volume)
     Tape1 / DAT Monitor - Schalter
+
     Tape1 / DAT monitor switch
  
     Sinus-Dauerleistung (DIN, 1 kHz): 2 x 75 W bei 4 Ohm, 2 x 60 W bei 8 Ohm Last
+
     Continuous sine wave power (DIN, 1 kHz): 2 x 75 W at 4 Ohm, 2 x 60 W at 8 Ohm load
     Empfindlichkeit der Line-Engänge: 150 mV (50 kOhm Eingangswiderstand)
+
     Line input sensitivity: 150 mV (50 kOhm input impedance)
     Empfindlichkeit des Phono-Eingangs: 2,5 mV (50 kOhm Eingangswiderstand)
+
     Sensitivity of phono input: 2.5 mV (50 kOhm input impedance)
     Lautsprecher-Impedanz: 4 bis 16 Ohm (bei Parallelbetrieb Lautsprecherpaar A+B 8 bis 16 Ohm)
+
     Speaker impedance: 4 to 16 ohms (8 to 16 ohms when speaker pair A+B is used in parallel)
     Signal-Rauschabstand: 100 dB (Line-Eingänge), 76 dB (Phono-Eingang)
+
     Signal-to-noise ratio: 100 dB (line inputs), 76 dB (phono input)
     Frequenzgang: 7 Hz bis 100 kHz (!) (-3 dB) (Line-Eingänge), RIAA-Entzerrungskurve (±0,5 dB) (Phono-Eingang)
+
     Frequency response: 7 Hz to 100 kHz (!) (-3 dB) (line inputs), RIAA equalization curve (±0.5 dB) (phono input)
     Klirrfaktor: unter 0,025% (bei 10 W Ausgangsleistung)
+
     Distortion factor: less than 0.025% (at 10 W output power)
     Dämpfungsfaktor: 50 (8 Ohm, 1 kHz)
+
     Attenuation factor: 50 (8 Ohm, 1 kHz)
     Abmessungen: 43 x 13,5 x 37,5 cm (BxHxT), Gewicht: ca. 6,6kg, SN 4503207
+
     Dimensions: 43 x 13.5 x 37.5 cm (WxHxD), Weight: approx. 6.6kg, SN 4503207
  
== Bemerkungen ==
+
== Remarks ==
Weitere Modelle der gleichen Serie:
+
Other models of the same series:
  
== Bilder ==
+
== Pictures ==
[[Datei:Sony TA-F 445.jpg]]
+
[[File:Sony TA-F 445.jpg]]
== Testberichte ==
+
== Reviews ==
  
 
== Links ==
 
== Links ==
  
[[Kategorie:Verstärker & Vorverstärker]]
+
[[Category:Integrated amplifier]]
 
__NOTOC__
 
__NOTOC__

Latest revision as of 14:16, 14 December 2014

Sony integrated amplifier with MOSFET and phono section

Equipment, Connections and Technical Data:

   Discretely constructed power amplifier with high-quality MOSFET (MOS field-effect transistors), i.e. no cheap power amplifier IC as in the latest amplifier generation
   Metal front
   Inputs for Phono, Tuner, CD, AUX, Tape1 / DAT, Tape2 / MD
   Rec outputs: Tape1 / DAT, Tape2 / MD
   3 switchable 230V sockets
   Two pairs of speakers connectable, A, B or A+B switchable
   Rotatable input selector
   Source Direct switch (bypassing the tone control)
   Loudness (boost bass and treble at low volume)
   Tape1 / DAT monitor switch 
   Continuous sine wave power (DIN, 1 kHz): 2 x 75 W at 4 Ohm, 2 x 60 W at 8 Ohm load
   Line input sensitivity: 150 mV (50 kOhm input impedance)
   Sensitivity of phono input: 2.5 mV (50 kOhm input impedance)
   Speaker impedance: 4 to 16 ohms (8 to 16 ohms when speaker pair A+B is used in parallel)
   Signal-to-noise ratio: 100 dB (line inputs), 76 dB (phono input)
   Frequency response: 7 Hz to 100 kHz (!) (-3 dB) (line inputs), RIAA equalization curve (±0.5 dB) (phono input)
   Distortion factor: less than 0.025% (at 10 W output power)
   Attenuation factor: 50 (8 Ohm, 1 kHz)
   Dimensions: 43 x 13.5 x 37.5 cm (WxHxD), Weight: approx. 6.6kg, SN 4503207

Remarks[edit]

Other models of the same series:

Pictures[edit]

Sony TA-F 445.jpg

Reviews[edit]

Links[edit]