Difference between revisions of "T+A Pulsar PD 1200 R"
m (hat „T&A Pulsar PD 1200 R“ nach „T+A Pulsar PD 1200 R“ verschoben) |
|||
| (14 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | __NOTOC__ |
| − | ''' | + | == Data == |
| − | * | + | {{navigation}} |
| − | * | + | '''General''' |
| − | * | + | * Manufacturer: [[T+A]] |
| − | * | + | * Model: Pulsar PD 1200 R |
| − | * | + | * Years of manufacture: |
| − | * | + | * Manufactured in: Herford / FRG |
| − | * | + | * Type: Digital preamplifier |
| − | * | + | * Remote control: Various system remote controls from T+A |
| − | * | + | * Power consumption ( operation / stand-by ): 30 VA / 2.5 VA |
| − | * | + | * Dimensions: 440 x 75 x 360 mm (WxHxD). |
| − | * | + | * Weight: |
| + | * Color: various | ||
| + | * New price approx.: 3.500 € | ||
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
* analog: | * analog: | ||
| − | ** 4 | + | ** 4 high level (1 input of which can be optionally upgraded to MM or MC-PHONO input). |
* digital: | * digital: | ||
| − | ** 4 | + | ** 4 digital inputs |
| − | * | + | * number of outputs: |
| − | ** 1 | + | ** 1 record output (digital) |
| − | ''' | + | '''Technical Data''' |
| − | * A/D | + | * Digital part |
| − | + | ** A/D converter type: Sigma/Delta | |
| − | + | ** Resolution: 20 Bit | |
| − | + | ** Sampling rate: 44.1 kHz or 48 kHz | |
| − | + | ** Frequency response: 2 ... 22,000 Hz | |
| − | + | ** Signal-to-noise ratio: > 108 dB | |
| − | + | ** Noise-to-noise ratio: > 110 dB | |
| − | + | Distortion factor: < 0.002% ** Record output ( analog ) | |
| − | + | ** Record output ( analog ): 1 V / 100 Ohm | |
| + | ** Record D/A converter: Sigma/Delta, 20 Bit | ||
| − | * Analog | + | * Analog output module: |
| − | + | ** Digital/Analog converter: 24 Bit / 192 kHz | |
| − | + | ** Frequency response: 1 ... 22,000 Hz | |
| − | + | ** Signal to noise ratio: 108 / 115 dB | |
| − | + | ** Distortion + Intermodulation: 0.0015% | |
| − | + | ** Channel separation: 100 dB | |
| − | + | ** Tone control ( digital ): +/- 6 dB at 300 / 3000 Hz | |
| − | |||
| − | |||
| − | |||
| + | |||
| + | '''Special Features''' | ||
| + | * T+A MEP room measurement system to compensate for room influences on the frequency response. | ||
| − | |||
| + | == Remarks == | ||
| − | |||
| − | == | + | == Links == |
| + | * [http://www.taelektroakustik.de/deu/ta2/r_system/pd_1200_r.htm Direct link to device] | ||
| + | * [http://www.TAelektroakustik.de Link to manufacturer's site] | ||
| − | + | [[Category:Preamplifier]] | |
Latest revision as of 08:29, 24 March 2014
Data[edit]
General
- Manufacturer: T+A
- Model: Pulsar PD 1200 R
- Years of manufacture:
- Manufactured in: Herford / FRG
- Type: Digital preamplifier
- Remote control: Various system remote controls from T+A
- Power consumption ( operation / stand-by ): 30 VA / 2.5 VA
- Dimensions: 440 x 75 x 360 mm (WxHxD).
- Weight:
- Color: various
- New price approx.: 3.500 €
Connections
- Number of inputs:
- analog:
- 4 high level (1 input of which can be optionally upgraded to MM or MC-PHONO input).
- digital:
- 4 digital inputs
- number of outputs:
- 1 record output (digital)
Technical Data
- Digital part
- A/D converter type: Sigma/Delta
- Resolution: 20 Bit
- Sampling rate: 44.1 kHz or 48 kHz
- Frequency response: 2 ... 22,000 Hz
- Signal-to-noise ratio: > 108 dB
- Noise-to-noise ratio: > 110 dB
Distortion factor: < 0.002% ** Record output ( analog )
- Record output ( analog ): 1 V / 100 Ohm
- Record D/A converter: Sigma/Delta, 20 Bit
- Analog output module:
- Digital/Analog converter: 24 Bit / 192 kHz
- Frequency response: 1 ... 22,000 Hz
- Signal to noise ratio: 108 / 115 dB
- Distortion + Intermodulation: 0.0015%
- Channel separation: 100 dB
- Tone control ( digital ): +/- 6 dB at 300 / 3000 Hz
Special Features
- T+A MEP room measurement system to compensate for room influences on the frequency response.