|
|
| Line 1: |
Line 1: |
| − | Form: Compact cassette tape deck
| + | |
| − | Head: Recording head: Ribbon sendust head
| |
| − | Reproducing head: Ribbon sendust head
| |
| − | Erase head: Special composition head
| |
| − | Motor: For a constant-speed drive: Quartz PLL direct-drive scheme coreless capstan motor
| |
| − | For the reeled live: High torque coreless motor
| |
| − | It is already volume time. 75 or less (C-60) seconds
| |
| − | Rotation unevenness 0.03% or less (WRMS)
| |
| − | Frequency characteristic
| |
| − | STD, LH tapes : 20Hz - 19kHz, 25Hz-16kHz±3dB (at the time of a -20dB sound recording)
| |
| − | Fe Cr tape : 20Hz - 20kHz, 25Hz-18kHz±3dB (at the time of a -20dB sound recording)
| |
| − | Chromium tapes : 20Hz - 20kHz, 25Hz-18kHz±3dB (at the time of a -20dB sound recording)
| |
| − | 20Hz - 13kHz (at the time of a 0dB sound recording)
| |
| − | Metal tape : 20Hz - 20kHz, 25Hz-19kHz±3dB (at the time of a -20dB sound recording)
| |
| − | 20Hz - 15kHz (at the time of a 0dB sound recording)
| |
| − | 30Hz-15khz±1dB (It is about AutoBLE at the using time. At the time of a 20dB sound recording )
| |
| − | SN ratio (3% of 3rd THD)
| |
| − | Auditory sensation weighting Dolby off: 60dB or more
| |
| − | Dolby on: 70dB or more (5kHz or more)
| |
| − | Distortion 1.0% or less (0dB)
| |
| − | Input sensitivity/maximum permissible input
| |
| − | /impedance Line: 65mV/15V/100kohm, a pin jack
| |
| − | Mic: 0.3mV/100mV/10kohm, the diameter jack of 6mm
| |
| − | (Conformity mic impedance: 250ohms - 10kohm)
| |
| − | Normal-output level / maximum level
| |
| − | /impedance Line: 450mV/640mV/50kohm, a pin jack
| |
| − | Headphone: 63mV/90 mV/8 ohm, the diameter stereo jack of 6mm
| |
| − | The semiconductor used IC:42
| |
| − | Transistor: 194
| |
| − | Diode: 124 (zener diode: 16, light emitting diode:19)
| |
| − | Phot interrupter: One
| |
| − | Supply voltage AC100V, 50Hz/60Hz
| |
| − | Power consumption 45W
| |
| − | Dimensions Width 420x height 217x depth of 390mm
| |
| − | Weight 18kg
| |