Difference between revisions of "Mivoc SW 1000 A-II"
Stefan Phan (talk | contribs) (Die Seite wurde neu angelegt: „*Konfiguration: Einzelner Subwoofer *Verbindung: Kabelgebunden *Bauform: Standalone *Audioeingänge: Line In (Cinch), Hi-Level-In (Klemmen) *Marke: Mivoc *…“) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | * | + | *Configuration: Single subwoofer |
| − | * | + | *Connection: Wired |
| − | * | + | *Configuration: Standalone |
| − | * | + | *Audio Inputs: Line In (RCA), Hi-Level In (Terminals) |
| − | * | + | *Brand: [[Mivoc]] |
| − | *RMS | + | *RMS power: 100 W |
| − | * | + | *Model: SW 1000 A-II |
| − | == | + | ==Technical data:== |
| − | *Subwoofer | + | *Subwoofer with integrated amplifier with active crossover. |
| − | * | + | *power supply: 230 V alternating current 50 Hz |
| − | * | + | *Fuse: T 0.8 A |
| − | * | + | *Amplifier power: 100 Watt R.M.S. at 4 Ohm |
| − | * | + | *Active crossover: 40 Hz - 180 Hz adjustable |
| − | *Phase: 0 | + | *Phase: 0 degree and 180 degree switchable |
| − | * | + | *Driver: 25 cm (10'') |
| − | * | + | *Frequency range: 25 Hz to max. 180 Hz (DIN) |
| − | * | + | *Power switch: Off, Standby (auto on/off), On |
| − | * | + | *Connections: Line In (Cinch), Hi-Level In (terminals). |
| − | * | + | *Outputs: Hi-Level Out (forwarding of the signal from Hi-Level In unfiltered) |
| − | * | + | *Dimensions (W/H/D): 350 x 400 x 350 mm |
| − | == | + | == Remarks == |
| − | + | Further models of the same series: | |
| − | == | + | == Pictures == |
| − | [[ | + | [[File:Mivoc SW 1000 A-II.jpg]] |
| − | == | + | == Reviews == |
== Links == | == Links == | ||
| − | [[ | + | [[Category:Subwoofer]] |
__NOTOC__ | __NOTOC__ | ||
Latest revision as of 16:01, 28 November 2012
- Configuration: Single subwoofer
- Connection: Wired
- Configuration: Standalone
- Audio Inputs: Line In (RCA), Hi-Level In (Terminals)
- Brand: Mivoc
- RMS power: 100 W
- Model: SW 1000 A-II
Technical data:[edit]
- Subwoofer with integrated amplifier with active crossover.
- power supply: 230 V alternating current 50 Hz
- Fuse: T 0.8 A
- Amplifier power: 100 Watt R.M.S. at 4 Ohm
- Active crossover: 40 Hz - 180 Hz adjustable
- Phase: 0 degree and 180 degree switchable
- Driver: 25 cm (10)
- Frequency range: 25 Hz to max. 180 Hz (DIN)
- Power switch: Off, Standby (auto on/off), On
- Connections: Line In (Cinch), Hi-Level In (terminals).
- Outputs: Hi-Level Out (forwarding of the signal from Hi-Level In unfiltered)
- Dimensions (W/H/D): 350 x 400 x 350 mm
Remarks[edit]
Further models of the same series:
Pictures[edit]
