Difference between revisions of "Myryad MA 120"
(→Daten) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Myryad]] |
| − | * | + | * Model: MA 120 |
| − | * | + | * Years of manufacture: |
| − | * | + | * Type: Power Amplifier |
| − | * | + | * Remote control: No |
| − | * | + | * Power consumption: approx. 250W, standby <= 1W |
| − | * | + | * Dimensions: (WxDxH): 436 x 303 x 95 mm. |
| − | * | + | * Weight: 8,75 kg |
| − | * | + | * Color: black / silver / titanium |
| − | * | + | * Original price approx.: 899 € |
| − | ''' | + | '''Technical data''' |
| − | * | + | * Continuous output power: 60 W per channel (8 Ohm) |
| − | + | * Impulse power: 80 W into 8 Ohm, 120 W into 4 Ohm, 160 W into 2 Ohm | |
| − | * | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | * max. distortion: <0.05% (20Hz-20kHz) | ||
| + | * Dämpfungsfaktor: >150 (8Ohm, 50Hz) | ||
| + | * input sensitivity: 775mV | ||
| + | * input impedance: 100 kOhm / 450 pF | ||
| + | * slew rate: > 60V / µSec. | ||
| + | * Signal to noise ratio: > 111 dB (ref.60W), > 93 dB (ref.1W) | ||
| + | * Frequency range: (<0.2 dB) 20 Hz - 20 kHz | ||
| − | + | * Output (level/impedance): ?? | |
| − | * | + | * Channel separation: > 104dB |
| − | == | + | '''Special Features''' |
| + | * iLink allows coupling with other Myryad components | ||
| + | |||
| + | == Remarks == | ||
| + | Other models in the same series: | ||
| + | |||
| + | == Pictures == | ||
http://www.audiosystem.com.pl/myryad/powiekszenia/ma120.jpg | http://www.audiosystem.com.pl/myryad/powiekszenia/ma120.jpg | ||
| + | |||
| + | == Reports == | ||
| + | |||
| + | == Links == | ||
| + | |||
| + | [[Category:Power Amplifiers]]</0.05%> | ||
Latest revision as of 18:15, 2 April 2011
Data
General
- Manufacturer: Myryad
- Model: MA 120
- Years of manufacture:
- Type: Power Amplifier
- Remote control: No
- Power consumption: approx. 250W, standby <= 1W
- Dimensions: (WxDxH): 436 x 303 x 95 mm.
- Weight: 8,75 kg
- Color: black / silver / titanium
- Original price approx.: 899 €
Technical data
- Continuous output power: 60 W per channel (8 Ohm)
- Impulse power: 80 W into 8 Ohm, 120 W into 4 Ohm, 160 W into 2 Ohm
- max. distortion: <0.05% (20Hz-20kHz)
- Dämpfungsfaktor: >150 (8Ohm, 50Hz)
- input sensitivity: 775mV
- input impedance: 100 kOhm / 450 pF
- slew rate: > 60V / µSec.
- Signal to noise ratio: > 111 dB (ref.60W), > 93 dB (ref.1W)
- Frequency range: (<0.2 dB) 20 Hz - 20 kHz
- Output (level/impedance): ??
- Channel separation: > 104dB
Special Features
- iLink allows coupling with other Myryad components
Remarks
Other models in the same series:
Pictures
Reports
Links
</0.05%>