Difference between revisions of "Brown CV 60"
| (2 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | CSV60 | + | CSV60 technical data |
2 x 30 Watt. 60Watt (mono) | 2 x 30 Watt. 60Watt (mono) | ||
| − | + | Frequency range 20 Hz to 40kHz | |
| − | + | Distortion factor <0,5% | |
| − | + | Channels can be controlled separately or together. | |
| − | + | Audible volume | |
| − | + | Treble and bass +14db to -20db | |
| − | + | Multiple treble filters, rumble filter, presence switch, | |
| − | + | Inputs radio phono (also magnet.), tape microphone. | |
| − | + | Outputs: band loudspeaker(4 8 and 15 Ohm(ectrostats) | |
| − | + | ||
| + | distortion factor 80-15000 HZ under 0,5 | ||
| + | 10 tubes (4 x ECC83, 2 x ECF80, 4 x PL 500), 3 Si diodes, 2 selenium rectifiers | ||
| + | LF (low frequency) amplifier | ||
| + | 110; 125; 150; 220; 240 Volt switchable alternating current | ||
| + | * | ||
| + | cabinet: sheet steel painted light grey | ||
| + | Front panel: anodised aluminium | ||
| + | |||
| + | * | ||
| + | Features: | ||
| + | 4 inputs: magnet TA (3mV -33kOhm, equalized to CCIR), tape (200mV -500kOhm), broadcast (200mV -500kOhm), microphone (10mV -500kOhm). | ||
| + | Balance control, | ||
| + | Separate treble and bass controls (adjustable separately or coupled for each channel) | ||
| + | Switchable treble filter: 5 - 7 - 10 kHz with 10dB/ octave reduction | ||
| + | Switchable rumble filter: reduction 16-20dB/ octave from 90 Hz onwards | ||
| + | Presence switch with 6dB boost between 1 and 15 kHz | ||
| + | Switch for rear band control | ||
| + | Outputs: TB | ||
| + | Speaker cabinets 4 - 8 - 16 Ohm | ||
| − | |||
| − | + | Dimensions: 40 x 10 x 32 cm (w x h x d) | |
| + | |||
| + | weight 13,5kg | ||
| + | [[Category:Integrated amplifier]] | ||
Latest revision as of 03:14, 22 March 2011
CSV60 technical data
2 x 30 Watt. 60Watt (mono)
Frequency range 20 Hz to 40kHz
Distortion factor <0,5%
Channels can be controlled separately or together.
Audible volume
Treble and bass +14db to -20db
Multiple treble filters, rumble filter, presence switch,
Inputs radio phono (also magnet.), tape microphone.
Outputs: band loudspeaker(4 8 and 15 Ohm(ectrostats)
distortion factor 80-15000 HZ under 0,5
10 tubes (4 x ECC83, 2 x ECF80, 4 x PL 500), 3 Si diodes, 2 selenium rectifiers
LF (low frequency) amplifier
110; 125; 150; 220; 240 Volt switchable alternating current
*
cabinet: sheet steel painted light grey
Front panel: anodised aluminium
*
Features:
4 inputs: magnet TA (3mV -33kOhm, equalized to CCIR), tape (200mV -500kOhm), broadcast (200mV -500kOhm), microphone (10mV -500kOhm).
Balance control,
Separate treble and bass controls (adjustable separately or coupled for each channel)
Switchable treble filter: 5 - 7 - 10 kHz with 10dB/ octave reduction
Switchable rumble filter: reduction 16-20dB/ octave from 90 Hz onwards
Presence switch with 6dB boost between 1 and 15 kHz
Switch for rear band control
Outputs: TB
Speaker cabinets 4 - 8 - 16 Ohm
Dimensions: 40 x 10 x 32 cm (w x h x d)
weight 13,5kg