Difference between revisions of "Unitra M 2405 S"

m
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Technische Daten Tonbandgerät  M 2405 S
+
Technical data tape recorder M 2405 S<br>
Bandgeschwingigkeit: 19,05 und 9,53 cm/s
+
Tape speed: 19.05 and 9.53 cm/s<br>
Geschwindigkeitsfehler: +/- 2%
+
Speed error: +/- 2%<br>
Tonhöhenschwankungen: bei 19,05 cm/s - 0,12%
+
Pitch variation: at 19,05 cm/s - 0,12%<br>
_____________________ bei 9,53 cm/s - 0,16%
+
_____________________ at 9.53 cm/s - 0.16%<br>
Frequenzbereich: bei 19,05 - 40...18000 Hz
+
Frequency range: at 19.05 - 40...18000 Hz<br>
________________ bei 9,53 - 40...16000 Hz
+
________________ at 9.53 - 40...16000 Hz<br>
Sinusausgangsleistung bei h 1%: 2 X 4W
+
Sine output power at h 1%: 2 X 4W<br>
Dynamik: 45 dB
+
Dynamic range: 45 dB<br>
Löschgüte: 65 dB
+
cancellation quality: 65 dB<br>
Übersprechunterdrückung zwischen Stereokanälen: 30 dB
+
Crosstalk suppression between stereo channels: 30 dB<br>
Hoch- und Tieftonblenden-Einstellbereich: +/- 12 dB
+
High and low frequency cut-off adjustment range: +/- 12 dB<br>
Maximale Bandspulengrösse: "18" = 180 mm
+
Maximum reel size: "18" = 180 mm<br>
Laufwerk-Ausschaltautomatik: bei metallisierten Bandenden
+
Automatic drive switch-off: for metallized tape ends<br>
Aussteuerungsanzeige: bei Aufnahme und Wiedergabe funktionierendes Drehspul-Doppelinstrument
+
Level meter: moving coil double meter functioning during recording and playback<br>
Eingebaute Lautsprecher: elliptisch, 2 X (145 X 100 mm)
+
Built-in speakers: elliptical, 2 X (145 X 100 mm)<br>
Eingänge: "MIKROFON" - 2 X (0,3...35 mV) an 3 kOhm
+
Inputs: "MIC" - 2 X (0.3...35 mV) at 3 kOhm<br>
_________ "RADIO" - 2 X (0,1...3 mV)/ an 40 kOhm
+
_________ "RADIO" - 2 X (0,1...3 mV)/ at 40 kOhm<br>
_________ "PLATTE" - 2 X (75...4000 mV) an 750 kOm
+
_________ "PLATTE" - 2 X (75...4000 mV) at 750 kOm<br>
Ausgänge: "RADIO" - 2 X 0,5 V an 10 kOhm
+
Outputs: "RADIO" - 2 X 0.5 V at 10 kOhm<br>
_________ "ZUSATZLAUTSPRECHER" - Lastimpedanz 4...8 Ohm
+
_________ "Auxiliary Loudspeaker" - load impedance 4...8 Ohm<br>
_________ "KOPFHÖRER" - 2 X 1 V an 10 kOhm
+
_________ "HEADPHONES" - 2 X 1 V at 10 kOhm<br>
Netzanscluss: 220 V; 50 Hz
+
Mains connection: 220 V; 50 Hz<br>
Leistungsaufnahme: 80 VA
+
Power consumption: 80 VA<br>
Gesammtabmessungen: 440 X 340 X 170 mm
+
Overall dimensions: 440 X 340 X 170 mm<br>
Betreibslage: horizontal und vertikal
+
Operating position: horizontal and vertical<br>
Eigenmasse: etwa 13 kg
+
Own mass: about 13 kg<br>
 +
[[Category:Tape machines]]</br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br>

Latest revision as of 08:14, 20 March 2011

Technical data tape recorder M 2405 S
Tape speed: 19.05 and 9.53 cm/s
Speed error: +/- 2%
Pitch variation: at 19,05 cm/s - 0,12%
_____________________ at 9.53 cm/s - 0.16%
Frequency range: at 19.05 - 40...18000 Hz
________________ at 9.53 - 40...16000 Hz
Sine output power at h 1%: 2 X 4W
Dynamic range: 45 dB
cancellation quality: 65 dB
Crosstalk suppression between stereo channels: 30 dB
High and low frequency cut-off adjustment range: +/- 12 dB
Maximum reel size: "18" = 180 mm
Automatic drive switch-off: for metallized tape ends
Level meter: moving coil double meter functioning during recording and playback
Built-in speakers: elliptical, 2 X (145 X 100 mm)
Inputs: "MIC" - 2 X (0.3...35 mV) at 3 kOhm
_________ "RADIO" - 2 X (0,1...3 mV)/ at 40 kOhm
_________ "PLATTE" - 2 X (75...4000 mV) at 750 kOm
Outputs: "RADIO" - 2 X 0.5 V at 10 kOhm
_________ "Auxiliary Loudspeaker" - load impedance 4...8 Ohm
_________ "HEADPHONES" - 2 X 1 V at 10 kOhm
Mains connection: 220 V; 50 Hz
Power consumption: 80 VA
Overall dimensions: 440 X 340 X 170 mm
Operating position: horizontal and vertical
Own mass: about 13 kg