Difference between revisions of "Audio Technica AT-OC 5"
m |
(→Daten) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Audio Technica]] |
| − | * | + | * Model: AT-OC5 |
| − | * | + | * Years of manufacture: 1986 ff |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: silver/green |
| − | * | + | * Weight: 8 g |
| − | * | + | * Original price approx.: 450 DM |
| − | ''' | + | '''Technical data''' |
| − | * | + | * Frequency response: 15 - 50,000 Hz |
| − | * | + | * Channel separation: > 27 dB @ 1 kHz |
| − | * | + | * Channel balance: < 1.5 dB @ 1 kHz |
| − | * | + | * Output voltage: 0.4 mV @ 1 KHz/5 cm/s |
| − | * | + | * Coil impedance [DC]: 12 ohms @ 1 kHz |
| − | * | + | * Terminating resistor: > 100 Ohm @ 100 -200 pF |
| − | * | + | * Inductance: 50 µH @ 1kHz |
| − | * | + | * needle type: elliptical, bare diamond |
| − | * | + | * Vertical scanning angle: 23 |
| − | * | + | * Recommended tracking force: 1.25 - 1.75 mN |
| − | * | + | * Needle compliance: 35 x 10^-6 cm/dyne static, 9 x 10^-6 cm/dyne @ 100Hz dynamic |
| − | ''' | + | '''Special Features''' |
| − | * PC/OCC | + | * PC/OCC coils |
| − | == | + | == Remarks == |
| − | + | Other models of the same series: | |
| − | == | + | == Pictures == |
| + | [[Image:atoc5.jpg]] | ||
| − | == | + | == Reports == |
== Links == | == Links == | ||
| − | [[ | + | [[Category:Pickups]] |
Latest revision as of 15:23, 28 December 2010
Contents
Data[edit]
General
- Manufacturer: Audio Technica
- Model: AT-OC5
- Years of manufacture: 1986 ff
- Made in: Japan
- Color: silver/green
- Weight: 8 g
- Original price approx.: 450 DM
Technical data
- Frequency response: 15 - 50,000 Hz
- Channel separation: > 27 dB @ 1 kHz
- Channel balance: < 1.5 dB @ 1 kHz
- Output voltage: 0.4 mV @ 1 KHz/5 cm/s
- Coil impedance [DC]: 12 ohms @ 1 kHz
- Terminating resistor: > 100 Ohm @ 100 -200 pF
- Inductance: 50 µH @ 1kHz
- needle type: elliptical, bare diamond
- Vertical scanning angle: 23
- Recommended tracking force: 1.25 - 1.75 mN
- Needle compliance: 35 x 10^-6 cm/dyne static, 9 x 10^-6 cm/dyne @ 100Hz dynamic
Special Features
- PC/OCC coils
Remarks[edit]
Other models of the same series:
Pictures[edit]
