Difference between revisions of "Brinkmann Amplifier"
m |
|||
| (2 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Brinkmann]] |
| − | * | + | * Model: Integrated amplifier |
| − | * | + | * Years of manufacture: 1997 to date |
| − | * | + | * Made in: Germany |
| − | * | + | * Color: black |
| − | * | + | * Type: (digital/analog) analog, optionally available with D/A converter board |
| − | * | + | * Remote control: yes, on the newer units |
| − | * | + | * Power consumption: stand-by 50W, idle 70W, full load 240W |
| − | * | + | * Dimensions: 44 x 6,5 x 31 cm (WxHxD) |
| − | * | + | * Weight: 14kg |
| − | * | + | * New price approx: |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: 4 analog, 2 digital |
| − | ** | + | ** 4 Cinch analog |
| − | * | + | 2 Cinch digital (75 Ohm) |
| − | ** | + | * Number of outputs: 1 |
| + | ** 1 pair of LS terminals | ||
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Continuous power (at distortion factor) |
| − | ** 8 Ohm: | + | ** 8 Ohm: 70W |
| − | + | 4 Ohm: 100W | |
| − | * | + | * Dynamic power |
| − | ** 8 Ohm: | + | ** 8 Ohm: 75W |
| − | ** 4 Ohm: | + | ** 4 Ohm: 100W |
| − | * | + | * Total harmonic distortion: 0.1% at half power |
| − | * | + | * Attenuation factor: 65 referred to 8 Ihm |
| − | * | + | * Frequency response: DC ... 250kHz |
| − | * | + | * Signal to noise ratio: 92 dbA |
| − | * | + | * Stereo channel separation: |
| − | * | + | * Tone control: no |
| − | + | * Loudness: no | |
| − | + | * High Filter: no | |
| − | * Loudness: | + | * Low Filter (Subsonic): no |
| − | * High Filter: | + | * Mute: yes, then the headphone output is active |
| − | * Low Filter (Subsonic): | + | * Direct/Line-Straight: no |
| − | * Mute: | ||
| − | * Direct/Line-Straight: | ||
| + | '''Special Features''' | ||
| + | * Headphone output | ||
| + | * remote control | ||
| + | * optional D/A converter board | ||
| − | + | == Remarks == | |
| − | + | Other models in the same series: | |
| + | == Pictures == | ||
| − | == | + | == Reports == |
| − | |||
| − | == | + | == Links == |
| − | + | http://www.brinkmann-audio.com | |
| − | |||
| − | |||
| − | [[ | + | [[Category:Integrated amplifier]] |
Latest revision as of 09:10, 27 July 2009
Data[edit]
General
- Manufacturer: Brinkmann
- Model: Integrated amplifier
- Years of manufacture: 1997 to date
- Made in: Germany
- Color: black
- Type: (digital/analog) analog, optionally available with D/A converter board
- Remote control: yes, on the newer units
- Power consumption: stand-by 50W, idle 70W, full load 240W
- Dimensions: 44 x 6,5 x 31 cm (WxHxD)
- Weight: 14kg
- New price approx:
Connections
- Number of inputs: 4 analog, 2 digital
- 4 Cinch analog
2 Cinch digital (75 Ohm)
- Number of outputs: 1
- 1 pair of LS terminals
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 70W
4 Ohm: 100W
- Dynamic power
- 8 Ohm: 75W
- 4 Ohm: 100W
- Total harmonic distortion: 0.1% at half power
- Attenuation factor: 65 referred to 8 Ihm
- Frequency response: DC ... 250kHz
- Signal to noise ratio: 92 dbA
- Stereo channel separation:
- Tone control: no
- Loudness: no
- High Filter: no
- Low Filter (Subsonic): no
- Mute: yes, then the headphone output is active
- Direct/Line-Straight: no
Special Features
- Headphone output
- remote control
- optional D/A converter board
Remarks[edit]
Other models in the same series: