Difference between revisions of "Brinkmann Amplifier"
m |
|||
| (5 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | * [[Brinkmann | + | __NOTOC__ |
| + | == Data == | ||
| + | {{navigation}} | ||
| + | '''General''' | ||
| + | * Manufacturer: [[Brinkmann]] | ||
| + | * Model: Integrated amplifier | ||
| + | * Years of manufacture: 1997 to date | ||
| + | * Made in: Germany | ||
| + | * Color: black | ||
| + | * Type: (digital/analog) analog, optionally available with D/A converter board | ||
| + | * Remote control: yes, on the newer units | ||
| + | * Power consumption: stand-by 50W, idle 70W, full load 240W | ||
| + | * Dimensions: 44 x 6,5 x 31 cm (WxHxD) | ||
| + | * Weight: 14kg | ||
| + | * New price approx: | ||
| + | |||
| + | |||
| + | '''Connections''' | ||
| + | * Number of inputs: 4 analog, 2 digital | ||
| + | ** 4 Cinch analog | ||
| + | 2 Cinch digital (75 Ohm) | ||
| + | * Number of outputs: 1 | ||
| + | ** 1 pair of LS terminals | ||
| + | |||
| + | |||
| + | '''Technical Data''' | ||
| + | * Continuous power (at distortion factor) | ||
| + | ** 8 Ohm: 70W | ||
| + | 4 Ohm: 100W | ||
| + | * Dynamic power | ||
| + | ** 8 Ohm: 75W | ||
| + | ** 4 Ohm: 100W | ||
| + | * Total harmonic distortion: 0.1% at half power | ||
| + | * Attenuation factor: 65 referred to 8 Ihm | ||
| + | * Frequency response: DC ... 250kHz | ||
| + | * Signal to noise ratio: 92 dbA | ||
| + | * Stereo channel separation: | ||
| + | * Tone control: no | ||
| + | * Loudness: no | ||
| + | * High Filter: no | ||
| + | * Low Filter (Subsonic): no | ||
| + | * Mute: yes, then the headphone output is active | ||
| + | * Direct/Line-Straight: no | ||
| + | |||
| + | '''Special Features''' | ||
| + | * Headphone output | ||
| + | * remote control | ||
| + | * optional D/A converter board | ||
| + | |||
| + | == Remarks == | ||
| + | Other models in the same series: | ||
| + | |||
| + | == Pictures == | ||
| + | |||
| + | == Reports == | ||
| + | |||
| + | == Links == | ||
| + | |||
| + | http://www.brinkmann-audio.com | ||
| + | |||
| + | [[Category:Integrated amplifier]] | ||
Latest revision as of 09:10, 27 July 2009
Data[edit]
General
- Manufacturer: Brinkmann
- Model: Integrated amplifier
- Years of manufacture: 1997 to date
- Made in: Germany
- Color: black
- Type: (digital/analog) analog, optionally available with D/A converter board
- Remote control: yes, on the newer units
- Power consumption: stand-by 50W, idle 70W, full load 240W
- Dimensions: 44 x 6,5 x 31 cm (WxHxD)
- Weight: 14kg
- New price approx:
Connections
- Number of inputs: 4 analog, 2 digital
- 4 Cinch analog
2 Cinch digital (75 Ohm)
- Number of outputs: 1
- 1 pair of LS terminals
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 70W
4 Ohm: 100W
- Dynamic power
- 8 Ohm: 75W
- 4 Ohm: 100W
- Total harmonic distortion: 0.1% at half power
- Attenuation factor: 65 referred to 8 Ihm
- Frequency response: DC ... 250kHz
- Signal to noise ratio: 92 dbA
- Stereo channel separation:
- Tone control: no
- Loudness: no
- High Filter: no
- Low Filter (Subsonic): no
- Mute: yes, then the headphone output is active
- Direct/Line-Straight: no
Special Features
- Headphone output
- remote control
- optional D/A converter board
Remarks[edit]
Other models in the same series: