Difference between revisions of "Ortofon Concorde Broadcast E"
m |
|||
| Line 1: | Line 1: | ||
| − | == | + | __NOTOC__ |
| − | {{ | + | == Data == |
| + | {{navigation}} | ||
| + | '''General''' | ||
| + | * Manufacturer: [[Ortofon]] | ||
| + | * Model: Concorde Broadcast E | ||
| + | * Type: MM cartridge for DJs | ||
| + | * Years of manufacture: | ||
| + | * Made in: | ||
| + | * Color: black/bright red | ||
| + | * Weight: 18,5 g | ||
| + | * Original price approx.: 100€ | ||
| − | |||
| − | * | + | '''Technical Data''' |
| − | * | + | * Frequency response: 10 - 22,000 Hz |
| − | * | + | * Channel separation: 23 dB @ 1 kHz / 15 dB @ 15 kHz |
| − | * | + | * Channel balance: 2.0 dB |
| − | * | + | * Output voltage: 6 mV (1 KHz/5 cm/s) |
| − | * | + | * FIM distortion: < 1% |
| − | * | + | * Terminating resistor: 47 kOhm |
| − | * | + | * Inductance: 450 mH |
| + | * Needle type: special elliptical (13 x 25 µm) | ||
| + | * vert. scanning angle: 20 | ||
| + | * recommended contact force: 2,0 - 4,0 mN | ||
| + | * recommended cable inductance: 200-600 pF | ||
| + | * needle compliance: 9 µm/mN | ||
| − | ''' | + | '''Special equipment''' |
| + | * here, if available | ||
| − | + | ||
| − | + | == Remarks == | |
| − | + | Other models of the same series: | |
| − | + | ||
| − | + | == Pictures == | |
| − | + | ||
| − | + | == Reports == | |
| − | + | ||
| − | + | == Links == | |
| − | + | ||
| − | + | [[Category:Pickups]] | |
| − | |||
| − | |||
Latest revision as of 08:32, 24 February 2009
Data[edit]
General
- Manufacturer: Ortofon
- Model: Concorde Broadcast E
- Type: MM cartridge for DJs
- Years of manufacture:
- Made in:
- Color: black/bright red
- Weight: 18,5 g
- Original price approx.: 100€
Technical Data
- Frequency response: 10 - 22,000 Hz
- Channel separation: 23 dB @ 1 kHz / 15 dB @ 15 kHz
- Channel balance: 2.0 dB
- Output voltage: 6 mV (1 KHz/5 cm/s)
- FIM distortion: < 1%
- Terminating resistor: 47 kOhm
- Inductance: 450 mH
- Needle type: special elliptical (13 x 25 µm)
- vert. scanning angle: 20
- recommended contact force: 2,0 - 4,0 mN
- recommended cable inductance: 200-600 pF
- needle compliance: 9 µm/mN
Special equipment
- here, if available
Remarks[edit]
Other models of the same series: