Difference between revisions of "Tascam DA-30 MK II"
| Line 21: | Line 21: | ||
* SCMS free recording | * SCMS free recording | ||
* Built-in parallel interface | * Built-in parallel interface | ||
| + | * 8,5 kg | ||
Revision as of 14:10, 19 February 2009
- Tape Speed: 8.5 mm/sec, (12.225 mm/sec.)
- Quantization Bit: 16-bit linear (SP); 12 bit nonlinear (LP)
- Sampling Rate: Recording: 48 kHz/44.1 (digital, analog input); 32 kHz (digital input only)
- Frequency Response: 20 Hz - 20 kHz +/- .5dB 9SP) 20 HZ - 14.5 kHz +/- .5dB (LP)
- Signal to Noise Ratio: Better than 92 db
- Dynamic Range: Better than 93 db
- Total Harmonic Distortion: 0.004% at 1 kHz (SP) .07% at 1 kHz (LP)
- Channel Separation: Better than 85 db (at 1 kHz)
- Wow and Flutter: Unmeasurable (less than 0.001%)
- Analog Input: (XLR) balanced, +4 dBm / 10k ohm (RCA) unbalanced, -10 dB V /50k ohm
- Analog Output: (XLR) balanced, +4 dBm/10k ohm, (RCA) unbalanced, -10 dBV (+6 dBV max)/ 430 ohm;
- Output Level: 100mW or more (8-ohm load)
- Headphone Output: 1/4" phone jack (x1), 100 mW + 100 mW (8 ohm)
- Digital I/O:
- (XLR) AES/EBU (RCA) Coaxial (S/PDIF); Parallel Control I/O Port: D-sub
- 15-pin (female)
- Independent left and right channel
- AES/EBU and S/PDIF Digital I/O
- Balanced and unbalanced I/O
- 48/44.1/32 kHz sampling frequencies
- SCMS free recording
- Built-in parallel interface
- 8,5 kg