Difference between revisions of "Pioneer A-445"
(13 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
− | ''' | + | __NOTOC__ |
+ | == Data == | ||
+ | {{navigation}} | ||
+ | '''General''' | ||
+ | * Manufacturer: [[Pioneer]] | ||
+ | * Model: A-445 | ||
+ | * Type: Integrated amplifier | ||
+ | * Years of manufacture: 1989 - 1990 | ||
+ | * Made in: Japan | ||
+ | * Colors: Black, Silver A-445-S | ||
+ | * Remote control: no | ||
+ | * Power consumption: 550 W | ||
+ | * Dimensions (WxHxD): 420 x 123 x 330 mm | ||
+ | * Weight: 8 kg | ||
+ | * Original price approx.: 500 DM | ||
− | |||
− | + | '''Technical Data''' | |
− | * | + | * Continuous power (with distortion factor) |
− | * | + | ** 8 Ohm: 2 x 60 W / 0,009% * 4 Ohm: 2 x 80 W / 0,009 |
− | * | + | 4 Ohm: 2 x 80 W |
− | * | + | * Dynamic power |
− | * | + | ** 8 Ohm: 75 W |
+ | ** 4 Ohm: 110 W | ||
+ | * Frequency response: | ||
+ | ** PHONO (MM) 20 HZ to 20kHz ± 0.3 dB | ||
+ | PHONO (MC) 20 HZ to 20kHz ± 0.5 dB | ||
+ | *Total harmonic distortion: 0.008 % | ||
+ | *Noise floor: 107 dB | ||
+ | *Inputs: | ||
**PHONO (MC/MM) | **PHONO (MC/MM) | ||
**TUNER | **TUNER | ||
**CD | **CD | ||
**Line/AUX | **Line/AUX | ||
− | + | 2x TAPE/MD/DAT | |
− | * | + | *Separable pre- and power amplifier (IN-OUT/PRE-OUT) |
− | * | + | *Connections for 2 speaker pairs A + B individually switchable |
− | * | + | *Controls: |
− | ** | + | **Volume |
− | ** | + | balance |
− | ** | + | Bass |
− | ** | + | treble |
− | * | + | *Muting button |
− | * | + | *Loudness button |
− | * | + | *Subsonic button |
− | * | + | *Line Direct switch |
− | * | + | |
− | * | + | |
+ | '''Special Features''' | ||
+ | *Super Linear Circuit (SLC): by cancelling the non-linearity of one component with the complementary non-linearity of the other, the lowest possible distortion, higher stability and flat frequency response are achieved. Overall, better sound reproduction is achieved thanks to the excellent open-loop frequency response. | ||
+ | *Six-position recording selector switch. | ||
+ | *Honeycomb-ribbed chassis, honeycomb-structured heat sink and honeycomb damper feet to protect against resonance and microphonic effects. | ||
+ | *Digital sound quality even at low impedances: High stability to impedance curve fluctuations. | ||
+ | *"Non-Switching" Type II: Amplification without switching distortion; improved thermal stability and high linearity for natural sound. | ||
+ | *Direct Connection: Signal reaches the output via the shortest possible path, contributing to sound purity. | ||
+ | *Clean Ground System: Ground side free of leakage components due to chassis isolated from transformers and heat sinks. | ||
+ | *DIRECT switch: For direct connection to the volume control. | ||
+ | *Outputs for two pairs of speakers: Choice of separate or common operation. | ||
+ | *High-gain phono equalizer amplifier. | ||
+ | |||
+ | |||
+ | == Remarks == | ||
+ | * Previous model: | ||
+ | * [[Pioneer A-443]] | ||
+ | |||
+ | |||
+ | * Successor model: | ||
+ | * [[Pioneer A-447]] | ||
+ | |||
+ | * Other models in the same series: | ||
+ | *[[Pioneer A-225]] | ||
+ | *[[Pioneer A-335]] | ||
+ | *[[Pioneer A-445]] | ||
+ | *[[Pioneer A-656]] | ||
+ | *[[Pioneer A-757]] | ||
+ | *[[Pioneer A-858]] | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | *[[Picture: Pioneer A-445 | ||
+ | [[File:Pioneer A-445.jpg]] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | == Test reports == | |
+ | * Report in "FonoForum" 12 / 1989 | ||
− | |||
− | |||
− | |||
== Links == | == Links == | ||
− | [[ | + | |
− | + | [[Category:Integrated amplifier]] |
Latest revision as of 07:56, 9 April 2021
Data[edit]
General
- Manufacturer: Pioneer
- Model: A-445
- Type: Integrated amplifier
- Years of manufacture: 1989 - 1990
- Made in: Japan
- Colors: Black, Silver A-445-S
- Remote control: no
- Power consumption: 550 W
- Dimensions (WxHxD): 420 x 123 x 330 mm
- Weight: 8 kg
- Original price approx.: 500 DM
Technical Data
- Continuous power (with distortion factor)
- 8 Ohm: 2 x 60 W / 0,009% * 4 Ohm: 2 x 80 W / 0,009
4 Ohm: 2 x 80 W
- Dynamic power
- 8 Ohm: 75 W
- 4 Ohm: 110 W
- Frequency response:
- PHONO (MM) 20 HZ to 20kHz ± 0.3 dB
PHONO (MC) 20 HZ to 20kHz ± 0.5 dB
- Total harmonic distortion: 0.008 %
- Noise floor: 107 dB
- Inputs:
- PHONO (MC/MM)
- TUNER
- CD
- Line/AUX
2x TAPE/MD/DAT
- Separable pre- and power amplifier (IN-OUT/PRE-OUT)
- Connections for 2 speaker pairs A + B individually switchable
- Controls:
- Volume
balance Bass treble
- Muting button
- Loudness button
- Subsonic button
- Line Direct switch
Special Features
- Super Linear Circuit (SLC): by cancelling the non-linearity of one component with the complementary non-linearity of the other, the lowest possible distortion, higher stability and flat frequency response are achieved. Overall, better sound reproduction is achieved thanks to the excellent open-loop frequency response.
- Six-position recording selector switch.
- Honeycomb-ribbed chassis, honeycomb-structured heat sink and honeycomb damper feet to protect against resonance and microphonic effects.
- Digital sound quality even at low impedances: High stability to impedance curve fluctuations.
- "Non-Switching" Type II: Amplification without switching distortion; improved thermal stability and high linearity for natural sound.
- Direct Connection: Signal reaches the output via the shortest possible path, contributing to sound purity.
- Clean Ground System: Ground side free of leakage components due to chassis isolated from transformers and heat sinks.
- DIRECT switch: For direct connection to the volume control.
- Outputs for two pairs of speakers: Choice of separate or common operation.
- High-gain phono equalizer amplifier.
Remarks[edit]
- Previous model:
- Pioneer A-443
- Successor model:
- Pioneer A-447
- Other models in the same series:
- Pioneer A-225
- Pioneer A-335
- Pioneer A-445
- Pioneer A-656
- Pioneer A-757
- Pioneer A-858
Pictures[edit]
- [[Picture: Pioneer A-445
Test reports[edit]
- Report in "FonoForum" 12 / 1989