Difference between revisions of "Kenwood Basic M 2 A"
| (31 intermediate revisions by 8 users not shown) | |||
| Line 1: | Line 1: | ||
| − | * | + | __NOTOC__ |
| − | *8 Ohm | + | == Data == |
| − | * | + | {{navigation}} |
| − | * | + | '''General''' |
| − | * | + | * Manufacturer: [[Kenwood]] |
| − | * | + | * Model: Basic M 2 A |
| − | * | + | * Type: Stereo power amplifier |
| − | * | + | * Years of manufacture: 1987 - 1990 |
| − | * | + | * Manufactured in: |
| − | * | + | * Color: Black |
| − | * | + | * Remote control: no |
| − | * | + | * Power consumption: 500 W |
| − | * | + | * Dimensions: 440 x 158 x 373 mm (WxHxD) |
| + | * Weight: 15.5 kg | ||
| + | * Original price approx.: 1'500 DM | ||
| + | |||
| + | |||
| + | '''Connections''' | ||
| + | * Number of inputs: | ||
| + | ** 1 x Line In | ||
| + | * Number of outputs: | ||
| + | ** 2 x loudspeaker | ||
| + | |||
| + | |||
| + | '''Technical Data''' | ||
| + | * Rated power | ||
| + | ** 8 Ohm: 2x 220 W RMS (20Hz - 20kHz, at 0.004% THD) | ||
| + | * Continuous power (at THD) | ||
| + | ** 8 Ohm: 2x 230 W (at 0.7% THD, 63Hz - 12.5kHz, according to IEC/NF standard; at 1% THD, 1kHz, according to DIN standard) | ||
| + | 4 Ohm: 2x 250 W (at 1% THD, 1kHz, according to DIN standard) | ||
| + | * Dynamic power | ||
| + | ** 8 Ohm: 2x 346 W | ||
| + | 4 Ohm: 2x 526 W | ||
| + | Total harmonic distortion: | ||
| + | ** 0.004% at nominal power (20Hz - 20kHz, 8 Ohm). | ||
| + | ** 0.001% at nominal power (1kHz, 8 Ohm) | ||
| + | * Intermodulation distortion | ||
| + | ** 0.004% at nominal power (60Hz:7kHz = 4:1, 8 Ohm) | ||
| + | * Attenuation factor: 1.000 (50Hz, 8 Ohm) | ||
| + | * Rise time 1.6 µSec. | ||
| + | * Input (sensitivity/impedance): | ||
| + | ** 1V/47kOhm | ||
| + | * Frequency response: 0 - 300 kHz (+0, -3dB) | ||
| + | * Signal-to-noise ratio: | ||
| + | ** 120dB (according to IHF-66). | ||
| + | 70dB (according to IEC/NF) | ||
| + | * Stereo channel separation: 70dB (according to IEC/NF) | ||
| + | |||
| + | |||
| + | '''Special Features''' | ||
| + | * Channel-separated level control | ||
| + | * Power meter with peak hold (can be switched off and switched 1/3 sec.) | ||
| + | * Headphone jack | ||
| + | |||
| + | == Note == | ||
| + | * Other models in the series: | ||
| + | * Kenwood preamplifier: | ||
| + | * [[Kenwood Basic C 1]] | ||
| + | * [[Kenwood Basic C 2]] | ||
| + | |||
| + | |||
| + | * Kenwood power amplifiers: | ||
| + | * [[Kenwood Basic M 1]] | ||
| + | * [[Kenwood Basic M 1 A]] | ||
| + | * [[Kenwood Basic M 2]] | ||
| + | * [[Kenwood Basic M 2 A]] | ||
| + | |||
| + | |||
| + | * [[Kenwood Corresponding Tuners: | ||
| + | * [[Kenwood BASIC T 1]] | ||
| + | * [[Kenwood BASIC T 2]] | ||
| + | |||
| + | |||
| + | * [[Corresponding Kenwood Tape Deck: | ||
| + | * [[Kenwood BASIC X 1]] | ||
| + | |||
| + | |||
| + | == Pictures == | ||
| + | * Picture: Kenwood Basic M 2 A front view | ||
| + | [[Image:Kenwood M2a Front.jpg]] | ||
| + | |||
| + | |||
| + | * Picture: Kenwood Basic M 2 A Display | ||
| + | [[Image:M2A_front_Display.jpg]] | ||
| + | |||
| + | |||
| + | * Picture: Kenwood Basic M 2 A Rear (US Model) | ||
| + | [[Image:M2A Rear.jpg]] | ||
| + | |||
| + | |||
| + | == Reports == | ||
| + | * Report by "Mackers": [[http://www.mackern.de/index.php/2013/02/16/kenwood-m2a/] | ||
| + | |||
| + | |||
| + | [[File:Kenwood KA-3-5-7 X-36-Daten-1987.jpg]] | ||
| + | |||
| + | |||
| + | == Links == | ||
| + | |||
| + | |||
| + | [[Category:Power Amplifiers]] | ||
Latest revision as of 03:11, 22 March 2021
Data[edit]
General
- Manufacturer: Kenwood
- Model: Basic M 2 A
- Type: Stereo power amplifier
- Years of manufacture: 1987 - 1990
- Manufactured in:
- Color: Black
- Remote control: no
- Power consumption: 500 W
- Dimensions: 440 x 158 x 373 mm (WxHxD)
- Weight: 15.5 kg
- Original price approx.: 1'500 DM
Connections
- Number of inputs:
- 1 x Line In
- Number of outputs:
- 2 x loudspeaker
Technical Data
- Rated power
- 8 Ohm: 2x 220 W RMS (20Hz - 20kHz, at 0.004% THD)
- Continuous power (at THD)
- 8 Ohm: 2x 230 W (at 0.7% THD, 63Hz - 12.5kHz, according to IEC/NF standard; at 1% THD, 1kHz, according to DIN standard)
4 Ohm: 2x 250 W (at 1% THD, 1kHz, according to DIN standard)
- Dynamic power
- 8 Ohm: 2x 346 W
4 Ohm: 2x 526 W Total harmonic distortion:
- 0.004% at nominal power (20Hz - 20kHz, 8 Ohm).
- 0.001% at nominal power (1kHz, 8 Ohm)
- Intermodulation distortion
- 0.004% at nominal power (60Hz:7kHz = 4:1, 8 Ohm)
- Attenuation factor: 1.000 (50Hz, 8 Ohm)
- Rise time 1.6 µSec.
- Input (sensitivity/impedance):
- 1V/47kOhm
- Frequency response: 0 - 300 kHz (+0, -3dB)
- Signal-to-noise ratio:
- 120dB (according to IHF-66).
70dB (according to IEC/NF)
- Stereo channel separation: 70dB (according to IEC/NF)
Special Features
- Channel-separated level control
- Power meter with peak hold (can be switched off and switched 1/3 sec.)
- Headphone jack
Note[edit]
- Other models in the series:
- Kenwood preamplifier:
- Kenwood Basic C 1
- Kenwood Basic C 2
- Kenwood power amplifiers:
- Kenwood Basic M 1
- Kenwood Basic M 1 A
- Kenwood Basic M 2
- Kenwood Basic M 2 A
- [[Kenwood Corresponding Tuners:
- Kenwood BASIC T 1
- Kenwood BASIC T 2
- [[Corresponding Kenwood Tape Deck:
- Kenwood BASIC X 1
Pictures[edit]
- Picture: Kenwood Basic M 2 A front view
- Picture: Kenwood Basic M 2 A Display
- Picture: Kenwood Basic M 2 A Rear (US Model)
Reports[edit]
- Report by "Mackers": [[1]
