Difference between revisions of "Tascam DA-P 1"
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Tascam]] |
− | * | + | * Model: DA-P 1 |
− | * | + | * Type: Professional portable DAT recorder |
− | * | + | * Years of manufacture: 1995 - 1999 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Black |
− | * | + | * Remote control: |
− | * | + | * Power consumption: 13 W normal operation, 15 W battery charging. |
− | * | + | * Dimensions: 258 x 54 x 188 mm (WxHxD) |
− | * | + | * Weight: 1.2 kg without batteries |
− | * | + | * Original price approx.: 3'800 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Mic/line inputs: XLR balanced, +4 dBm, 2.5 kOhm |
− | ** | + | ** Microphone: -60 dBm (-20 dB PAD, switchable) |
− | + | RCA unbalanced, -10 dBV, 35 kOhm | |
− | * Line | + | * Line outputs: Cinch unbalanced, -10 dBV, 500 Ohm, |
− | * | + | * Digital input/output: Cinch, SPDIF |
− | ''' | + | '''Technical Data''' |
− | * | + | * Sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz (digital input only) |
− | * | + | * Quantization: 16 bit linear |
− | * | + | * External signal-to-noise ratio: > 90 dB (line) |
* Tape Speed: SP - 8.15mm/s: LP - 4.075mm/s | * Tape Speed: SP - 8.15mm/s: LP - 4.075mm/s | ||
− | + | Recording Time (120 DAT): SP - 120 minutes; LP - 240 minutes | |
− | + | Fast Winding Time: Approx 60 seconds (120 tape) | |
− | + | Recording Resolution: SP - 16 bit linear; LP - 12 bit non-linear | |
− | + | Recording Sample Rate: SP - 44.1kHz, 48kHz; LP - 32kHz | |
− | + | Frequency Response: 20Hz-20kHz ±0.5dB, SP; 20Hz-14.5kHz LP | |
− | + | Signal to Noise Ratio: >90dB Playback (SP) | |
− | * Total Harmonic Distortion: | + | * Total Harmonic Distortion: <0.007% Playback (SP) |
− | * Wow and Flutter: Unmeasurable ( | + | * Wow and Flutter: Unmeasurable (<0.001%) |
− | ** Mic/Line XLR Inputs: Mic Setting: Balanced -60dBm (0.8mV), 2.5kOhm -20dB switchable pad | + | ** Mic/Line XLR Inputs: Mic Setting: Balanced -60dBm (0.8mV), 2.5kOhm -20dB switchable pad. |
− | + | Line Setting: Balanced +4dBm (1.2V), 10kOhm | |
− | * Analog Line In: Unbalanced RCA, -10dBV (0.3V), | + | * Analog Line In: Unbalanced RCA, -10dBV (0.3V), <35kOhm |
− | + | Analog Line Out: Unbalanced RCA, -10dBV (0.3V), 500 Ohm | |
− | + | Digital Coaxial I/O: Coaxial IEC60958 Type II | |
* Headphone Output: 15mW + 15mW @ 32 Ohms | * Headphone Output: 15mW + 15mW @ 32 Ohms | ||
* Average Battery Life: | * Average Battery Life: | ||
** Approx 120 minutes, phantom power off | ** Approx 120 minutes, phantom power off | ||
− | + | Approx 100 minutes, phantom power on | |
− | + | [[File:Tascam DA-P 1-Daten-1995.jpg]] | |
− | |||
− | |||
− | == | + | == Pictures == |
− | * | + | * Image: Tascam DA-P 1 |
+ | [[Image:Tascam_DA-P1.jpg]] | ||
− | * | + | == Reviews == |
− | * | + | * Professional portable DAT recorder DA-P1 for recording and playback of audio material on DAT tapes, switchable sampling frequency, built-in limiter to limit level peaks, balanced XLR mic/line inputs, unbalanced line inputs, switchable phantom power, switchable attenuator (-20 dB), no SCMS copy lock, illuminated LC display for ABS timecode, Remain, Program Time and Margin, headphone output with volume control, switchable lock for controls, approx. two hours recording time with charged battery, external power supply. |
− | ** CB-D1 | + | |
+ | |||
+ | * Options | ||
+ | BP-D1 additional Ni-Cd battery pack | ||
+ | ** CB-D1 battery charger | ||
== Links == | == Links == | ||
− | * | + | * [http://www.datrecorders.co.uk/dap1.php info page DAT] |
− | [[ | + | [[Category:DAT Recorder]] |
Latest revision as of 03:03, 15 March 2021
Data[edit]
General
- Manufacturer: Tascam
- Model: DA-P 1
- Type: Professional portable DAT recorder
- Years of manufacture: 1995 - 1999
- Made in: Japan
- Color: Black
- Remote control:
- Power consumption: 13 W normal operation, 15 W battery charging.
- Dimensions: 258 x 54 x 188 mm (WxHxD)
- Weight: 1.2 kg without batteries
- Original price approx.: 3'800 DM
Connections
- Mic/line inputs: XLR balanced, +4 dBm, 2.5 kOhm
- Microphone: -60 dBm (-20 dB PAD, switchable)
RCA unbalanced, -10 dBV, 35 kOhm
- Line outputs: Cinch unbalanced, -10 dBV, 500 Ohm,
- Digital input/output: Cinch, SPDIF
Technical Data
- Sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz (digital input only)
- Quantization: 16 bit linear
- External signal-to-noise ratio: > 90 dB (line)
- Tape Speed: SP - 8.15mm/s: LP - 4.075mm/s
Recording Time (120 DAT): SP - 120 minutes; LP - 240 minutes Fast Winding Time: Approx 60 seconds (120 tape) Recording Resolution: SP - 16 bit linear; LP - 12 bit non-linear Recording Sample Rate: SP - 44.1kHz, 48kHz; LP - 32kHz Frequency Response: 20Hz-20kHz ±0.5dB, SP; 20Hz-14.5kHz LP Signal to Noise Ratio: >90dB Playback (SP)
- Total Harmonic Distortion: <0.007% Playback (SP)
- Wow and Flutter: Unmeasurable (<0.001%)
- Mic/Line XLR Inputs: Mic Setting: Balanced -60dBm (0.8mV), 2.5kOhm -20dB switchable pad.
Line Setting: Balanced +4dBm (1.2V), 10kOhm
- Analog Line In: Unbalanced RCA, -10dBV (0.3V), <35kOhm
Analog Line Out: Unbalanced RCA, -10dBV (0.3V), 500 Ohm Digital Coaxial I/O: Coaxial IEC60958 Type II
- Headphone Output: 15mW + 15mW @ 32 Ohms
- Average Battery Life:
- Approx 120 minutes, phantom power off
Approx 100 minutes, phantom power on
Pictures[edit]
- Image: Tascam DA-P 1
Reviews[edit]
- Professional portable DAT recorder DA-P1 for recording and playback of audio material on DAT tapes, switchable sampling frequency, built-in limiter to limit level peaks, balanced XLR mic/line inputs, unbalanced line inputs, switchable phantom power, switchable attenuator (-20 dB), no SCMS copy lock, illuminated LC display for ABS timecode, Remain, Program Time and Margin, headphone output with volume control, switchable lock for controls, approx. two hours recording time with charged battery, external power supply.
- Options
BP-D1 additional Ni-Cd battery pack
- CB-D1 battery charger