Difference between revisions of "Kenwood KR-A 5050"
(→Links) |
|||
(3 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KR-A 5050 |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1993 - 1994 |
− | * | + | * Made in: Korea |
− | * | + | * Color: Black |
− | * | + | * Remote control: yes (RC-0500) |
− | * | + | * Power consumption: 180 W |
− | * | + | * Dimensions (WxHxD): 440 x 133 x 350 mm |
− | * | + | * Weight: 10.2 kg |
+ | * Original price approx.: 599 DM | ||
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
** 1x Phono MM (Cinch) | ** 1x Phono MM (Cinch) | ||
− | + | 1x CD/AUX In (Cinch) | |
− | + | 2x Tape In (Cinch) | |
− | + | 2x Video In (Cinch) | |
− | ** FM | + | ** FM antenna |
− | ** AM | + | ** AM antenna |
− | * | + | * Number of outputs: |
** 2x Tape Out (Cinch) | ** 2x Tape Out (Cinch) | ||
− | ** | + | ** Headphones (6,3mm jack) |
− | ** 2 | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (at distortion) |
** 8 Ohm: 2x 105 W (IHF'66) | ** 8 Ohm: 2x 105 W (IHF'66) | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.03% (1 kHz with 50 W at 8 ohms). |
− | * | + | * Attenuation factor: |
− | * | + | * Frequency response (IHF'66): 20 to 20,000 Hz. |
− | * | + | * Signal-to-noise ratio (IHF'66): |
** Phono MM: 73 dB | ** Phono MM: 73 dB | ||
− | + | Line: 100 dB | |
− | * | + | * Stereo channel separation: |
− | * | + | * Tone control: |
− | ** Bass: | + | ** Bass: yes (±10 dB at 100 Hz) |
− | + | Treble: yes (±10 dB at 10 kHz) | |
− | * Loudness: | + | * Loudness: yes (at -30dB volume approx. +8 dB at 100 Hz) |
* High Filter: | * High Filter: | ||
* Low Filter (Subsonic): | * Low Filter (Subsonic): | ||
− | * Mute: | + | * Mute: yes |
* Direct/Line-Straight: | * Direct/Line-Straight: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, AM |
− | * | + | * Frequencies: |
− | ** FM: 87 | + | ** FM: 87.5 - 108 MHz |
− | ** AM ( | + | ** AM (at 9kHz steps): 531 - 1602 kHz |
− | ** AM ( | + | ** AM (at 10kHz steps): 530 - 1610 kHz |
− | * | + | * Frequency response: 30 - 15,000 Hz |
− | * | + | * Input sensitivity: |
− | ** FM: 1 | + | ** FM: 1.3 µF |
− | + | AM: 40 µF | |
− | + | Distortion factor: FM: 0.4% (mono), 0.5% (stereo) (each at 65 dBf input signal) | |
− | + | Distortion factor: AM: 0.5% (mono), 0.4% (stereo) | |
− | * | + | * Signal-to-noise ratio: |
− | ** FM: 78 dB ( | + | ** FM: 78 dB (mono), 73 dB (stereo) (each at 65 dBf input signal). |
− | ** AM: 50 db (30% mod. 1 mV | + | ** AM: 50 db (30% mod. 1 mV input signal). |
− | * | + | * Channel separation: |
− | * | + | * Selectivity: |
− | * | + | * Co-wave selection: |
− | * | + | * Spurious wave selection: |
− | * | + | * IF attenuation: |
− | * | + | * IF attenuation: |
− | * | + | * Output level: |
− | * RDS: | + | * RDS: yes |
− | * | + | * Station memory: yes/20 |
− | ''' | + | '''Special Features''' |
* RDS | * RDS | ||
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
* [[Kenwood KR-A 3050]] | * [[Kenwood KR-A 3050]] | ||
* [[Kenwood KR-A 4050]] | * [[Kenwood KR-A 4050]] | ||
Line 92: | Line 93: | ||
− | == | + | == Pictures == |
− | * | + | * Image: Kenwood KR-A 5050 |
− | [[ | + | [[File:Kenwood KR-A 5050-1.jpg]] |
− | == | + | == Reports == |
− | [[ | + | [[File:Kenwood KR-A 4050-5050-Prospekt-1993.jpg]] |
== Links == | == Links == | ||
+ | * Prospectus in the Kenwood archive: [[https://www.kenwood.de/WebFiles/File/de/download/archive/kra5050.pdf] | ||
− | + | [[Category:Receiver]] | |
− | [[ |
Latest revision as of 13:27, 9 February 2021
Data[edit]
General
- Manufacturer: Kenwood
- Model: KR-A 5050
- Type: Receiver
- Years of manufacture: 1993 - 1994
- Made in: Korea
- Color: Black
- Remote control: yes (RC-0500)
- Power consumption: 180 W
- Dimensions (WxHxD): 440 x 133 x 350 mm
- Weight: 10.2 kg
- Original price approx.: 599 DM
Connections
- Number of inputs:
- 1x Phono MM (Cinch)
1x CD/AUX In (Cinch) 2x Tape In (Cinch) 2x Video In (Cinch)
- FM antenna
- AM antenna
- Number of outputs:
- 2x Tape Out (Cinch)
- Headphones (6,3mm jack)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (at distortion)
- 8 Ohm: 2x 105 W (IHF'66)
- 4 Ohm:
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.03% (1 kHz with 50 W at 8 ohms).
- Attenuation factor:
- Frequency response (IHF'66): 20 to 20,000 Hz.
- Signal-to-noise ratio (IHF'66):
- Phono MM: 73 dB
Line: 100 dB
- Stereo channel separation:
- Tone control:
- Bass: yes (±10 dB at 100 Hz)
Treble: yes (±10 dB at 10 kHz)
- Loudness: yes (at -30dB volume approx. +8 dB at 100 Hz)
- High Filter:
- Low Filter (Subsonic):
- Mute: yes
- Direct/Line-Straight:
Tuner
- Reception: FM, AM
- Frequencies:
- FM: 87.5 - 108 MHz
- AM (at 9kHz steps): 531 - 1602 kHz
- AM (at 10kHz steps): 530 - 1610 kHz
- Frequency response: 30 - 15,000 Hz
- Input sensitivity:
- FM: 1.3 µF
AM: 40 µF Distortion factor: FM: 0.4% (mono), 0.5% (stereo) (each at 65 dBf input signal) Distortion factor: AM: 0.5% (mono), 0.4% (stereo)
- Signal-to-noise ratio:
- FM: 78 dB (mono), 73 dB (stereo) (each at 65 dBf input signal).
- AM: 50 db (30% mod. 1 mV input signal).
- Channel separation:
- Selectivity:
- Co-wave selection:
- Spurious wave selection:
- IF attenuation:
- IF attenuation:
- Output level:
- RDS: yes
- Station memory: yes/20
Special Features
- RDS
Remarks[edit]
- Other models in the same series:
- Kenwood KR-A 3050
- Kenwood KR-A 4050
- Kenwood KR-A 5050
Pictures[edit]
- Image: Kenwood KR-A 5050
Reports[edit]
Links[edit]
- Prospectus in the Kenwood archive: [[1]