Difference between revisions of "Denon DRA-335 R"
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Denon]] |
| − | * | + | * Model: DRA-335 R |
| − | * | + | * Type: Receiver |
| − | * | + | * Years of manufacture: 1991 - 1993 |
| − | * | + | * Made in: Japan |
| − | * | + | * Colors: Champagne, Black |
| − | * | + | * Remote control: yes |
| − | * | + | * Power consumption: 120 W |
| − | * | + | * Dimensions: 434 x 120 x 312 mm (WxHxD) |
| − | * | + | * Weight: 6.4 kg |
| − | * | + | * Original price approx.: 498 DM UVP |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: 5 |
| − | + | Phono MM: 2.5 mV / 47 kOhm | |
** CD: 150 mV / 29 kOhm | ** CD: 150 mV / 29 kOhm | ||
** Video: 150 mV / 29 kOhm | ** Video: 150 mV / 29 kOhm | ||
** Tape 1: 150 mV / 29 kOhm | ** Tape 1: 150 mV / 29 kOhm | ||
** Tape2/VCR: 150 mV / 29 kOhm | ** Tape2/VCR: 150 mV / 29 kOhm | ||
| − | * | + | * Number of outputs: |
| − | ** Video out/Monitor: 1 | + | ** Video out/Monitor: 1 Vpp / 75 ohms. |
| − | ** | + | ** Headphones: |
| − | ** 2 | + | ** 2 speaker pairs (A, B or A+B switchable). |
| − | ''' | + | '''Technical Data''' |
| − | '' | + | '''Amplifier''' |
| − | * | + | * Rated power |
| − | + | 40W + 40W (8 Ohm, 20Hz ~ 20kHz, distortion 0,05%) | |
| − | + | 62W + 62W (4 Ohm steady 1kHz, distortion 0,7%) | |
| − | ** | + | **Power bandwidth (IHF): 10Hz ~ 40kHz (0.15% distortion, both channels driven at 8ohm) |
| − | ** | + | **Total distortion: 0.03% (-3dB at solo power 8ohm) |
| − | ** | + | **Frequency response: PHONO RIAA standard curve |
| − | ***( | + | ***(recording output) |
| − | ***MM 20Hz ~ 20kHz +-0 | + | ***MM 20Hz ~ 20kHz +-0.5dB |
| − | ***MM 20Hz ~ 50kHz +-1 | + | ***MM 20Hz ~ 50kHz +-1.5dB |
| − | ***( | + | ***(at 1W) |
**CD, VIDEO, TAPE | **CD, VIDEO, TAPE | ||
| − | ** | + | **Input sensitivity and impedance: PHONO MM 2.5mV 47kOhm |
| − | + | CD, VIDEO, TAPE 150mV 29kOhm | |
| − | + | Maximum input level (at 1kHz): PHONO MM 120mV | |
| − | + | Signal to Noise Ratio (IHF-A): PHONO MM 78dB at 5.0mV Input | |
| − | **CD, VIDEO, TAPE 95dB** | + | **CD, VIDEO, TAPE 95dB**Tone control: Bass +-10dB at 100Hz |
| − | + | Treble +-10dB at 10kHz | |
| − | **Loudness, | + | **Loudness, control effect: adjustable LOUDNESS, 10 positions |
| − | + | 50Hz / 10kHz, +10dB / +5dB | |
''Tuner'' | ''Tuner'' | ||
| − | * | + | * VHF: |
| − | ** | + | ** Reception range: 87.5 ... 108 MHz |
| − | + | useful sensitivity: 1.0 µV (11.2 dBf) | |
| − | + | 50dB sensitivity threshold: MONO : 1.7 µV (15.9 dBf) | |
| − | + | STEREO : 23 µV (38.5 dBf) | |
| − | + | S/N ratio (IHF-A): MONO : 82 dB***STEREO : 78 dB | |
| − | + | Total Harmonic Distortion (at 1kHz): MONO : 0.4% (WIDE) | |
| − | + | STEREO : 0.5% (WIDE) | |
| − | ** | + | ** Capture ratio: 1.5 dB |
| − | ** | + | ** Mirror wave attenuation: 65 dB |
| − | ** AM | + | ** AM suppression: 50 dB |
| − | ** | + | ** Tuning sharpness (+-300 kHz): 60 dB |
| − | ** | + | ** Frequency response: 30 Hz ... 15 kHz (-1.5 dB ... +0.2 dB) |
| − | + | Stereo separation (at 1 kHz): 40 dB | |
| − | + | AM (MW): | |
| − | ** | + | ** Reception range: 522 ... 1611 kHz |
| − | + | Usable sensitivity: 18 µV | |
| − | + | Signal to noise ratio: 55 dB | |
| − | == | + | == Remarks == |
| − | * | + | * Other models in the same series: |
* [[Denon DRA-335 R]] | * [[Denon DRA-335 R]] | ||
* [[Denon DRA-435 R]] | * [[Denon DRA-435 R]] | ||
| Line 84: | Line 84: | ||
| − | == | + | == Pictures == |
| − | * | + | * Image: Denon DRA-335 R |
| − | [[ | + | [[File:DENON DRA-335 R.jpg]] |
| − | == | + | == Reports == |
| Line 95: | Line 95: | ||
| − | [[ | + | [[Category:Receiver]] |
Latest revision as of 02:27, 20 January 2021
Data[edit]
General
- Manufacturer: Denon
- Model: DRA-335 R
- Type: Receiver
- Years of manufacture: 1991 - 1993
- Made in: Japan
- Colors: Champagne, Black
- Remote control: yes
- Power consumption: 120 W
- Dimensions: 434 x 120 x 312 mm (WxHxD)
- Weight: 6.4 kg
- Original price approx.: 498 DM UVP
Connections
- Number of inputs: 5
Phono MM: 2.5 mV / 47 kOhm
- CD: 150 mV / 29 kOhm
- Video: 150 mV / 29 kOhm
- Tape 1: 150 mV / 29 kOhm
- Tape2/VCR: 150 mV / 29 kOhm
- Number of outputs:
- Video out/Monitor: 1 Vpp / 75 ohms.
- Headphones:
- 2 speaker pairs (A, B or A+B switchable).
Technical Data
Amplifier
- Rated power
40W + 40W (8 Ohm, 20Hz ~ 20kHz, distortion 0,05%) 62W + 62W (4 Ohm steady 1kHz, distortion 0,7%)
- Power bandwidth (IHF): 10Hz ~ 40kHz (0.15% distortion, both channels driven at 8ohm)
- Total distortion: 0.03% (-3dB at solo power 8ohm)
- Frequency response: PHONO RIAA standard curve
- (recording output)
- MM 20Hz ~ 20kHz +-0.5dB
- MM 20Hz ~ 50kHz +-1.5dB
- (at 1W)
- CD, VIDEO, TAPE
- Input sensitivity and impedance: PHONO MM 2.5mV 47kOhm
CD, VIDEO, TAPE 150mV 29kOhm Maximum input level (at 1kHz): PHONO MM 120mV Signal to Noise Ratio (IHF-A): PHONO MM 78dB at 5.0mV Input
- CD, VIDEO, TAPE 95dB**Tone control: Bass +-10dB at 100Hz
Treble +-10dB at 10kHz
- Loudness, control effect: adjustable LOUDNESS, 10 positions
50Hz / 10kHz, +10dB / +5dB
Tuner
- VHF:
- Reception range: 87.5 ... 108 MHz
useful sensitivity: 1.0 µV (11.2 dBf) 50dB sensitivity threshold: MONO : 1.7 µV (15.9 dBf) STEREO : 23 µV (38.5 dBf) S/N ratio (IHF-A): MONO : 82 dB***STEREO : 78 dB Total Harmonic Distortion (at 1kHz): MONO : 0.4% (WIDE) STEREO : 0.5% (WIDE)
- Capture ratio: 1.5 dB
- Mirror wave attenuation: 65 dB
- AM suppression: 50 dB
- Tuning sharpness (+-300 kHz): 60 dB
- Frequency response: 30 Hz ... 15 kHz (-1.5 dB ... +0.2 dB)
Stereo separation (at 1 kHz): 40 dB AM (MW):
- Reception range: 522 ... 1611 kHz
Usable sensitivity: 18 µV Signal to noise ratio: 55 dB
Remarks[edit]
- Other models in the same series:
- Denon DRA-335 R
- Denon DRA-435 R
- Denon DRA-545 RD
- Denon DRA-735 R
- Denon DRA-935 R
Pictures[edit]
- Image: Denon DRA-335 R
