Difference between revisions of "Brown LS 150PA"

 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
== Daten ==
+
== Data ==
{{Navigation}}
+
{{navigation}}
'''Allgemein'''
+
'''General'''
* Hersteller: [[Braun]]
+
* Manufacturer: [[Braun]]
* Modell: LS 150 PA
+
* Model: LS 150 PA
* Typ: Aktiv-Lautsprecher
+
* Type: Active loudspeaker
* Baujahre: 1982 - 1988
+
* Years of manufacture: 1982 - 1988
* Hergestellt in:
+
* Manufactured in:
* Farben: Schwarz, Weiß
+
* Colors:
* Abmessungen: 1060 x 265 x 300 mm (HxBxT)
+
** 1983: Black, other colors on request
* Gewicht: 21,5 kg
+
** 1984 - 1986: Black, White, other colors on request
* Neupreis ca.: 2'300 DM pro Stück
+
** 1987 - 1988: Black, Grey, Redwood
 +
* Power consumption: max. 450 W, standby: 3 W
 +
* Dimensions: 1060 x 265 x 300 mm (HxWxD)
 +
* Gross volume: 70 l
 +
* Weight: 21,5 kg
 +
* Original price approx.: 2'300 DM per piece
  
  
'''Technische Daten'''
+
'''Connections'''
* Bauart: 3-Wege geschlossen, Standlautsprecher
+
* Number of inputs:
 +
* Input: Cinch
 +
* Sensitivity: 1 V / 22 kOhm, preamplifier or 10 V/600 Ohm, power amplifier switchable
 +
 
 +
 
 +
'''Technical data'''
 +
 
 +
''Amplifier''
 +
* Rated power: woofer channel 130 W; mid/high channel 80 W.
 +
* Music power: low frequency channel 180 W; mid/high frequency channel 120 W
 +
* Power bandwidth PA 1: 10 Hz - 80 kHz
 +
* Power bandwidth LS 150 active: 18 - 30 kHz
 +
* Crossover frequency: 700 Hz
 +
* Crossover: 12 dB/octave
 +
* Attenuation factor: 80 at 100 Hz, 45 at 10 kHz
 +
* External voltage spacing: both channels 100 dB
 +
* Crosstalk attenuation (1 kHz): 80 dB
 +
 
 +
 
 +
''Loudspeaker''
 +
* Construction: 3-way closed, floorstanding speaker
 
* Chassis:
 
* Chassis:
** Tieftöner: 2x 210 mm Konus
+
** woofer: 2x 210 mm cone
** Mitteltöner: 1x 50 mm Kalotte
+
midrange driver: 1x 50 mm dome tweeter
** Hochtöner: 1x 25 mm Kalotte
+
Tweeter: 1x 25 mm dome tweeter
* Belastbarkeit (Nenn-/Musikb.): 150 W / 300 W
+
* Power handling (nominal / music): 150 W / 300 W
* Wirkungsgrad: 91 dB / W / m
+
* Efficiency: 91 dB / W / m
* Frequenzgang: 18 - 25'000 Hz
+
* Frequency response: 18 - 25'000 Hz
* Übergangsbereiche: 500 / 4'500 Hz
+
* Transitional ranges: 500 / 4'500 Hz
* Impedanz: 8 Ohm
+
* Impedance: 8 Ohm
  
  
'''Besondere Ausstattungen'''
+
'''Special Features'''
* Sicherungen für Hoch- und Mitteltöner
+
* VV and signal decoder are operated in standby circuit, the power amplifier is automatically switched on or off.
* Gitter aus Lochstahl, innenseitig mit Akustikvlies beklebt
+
* Can be operated at preamplifier or power amplifier
 +
* Fuses for tweeter and midrange driver
 +
* Grille made of perforated steel, covered with acoustic fleece on the inside
  
  
== Bemerkungen ==
+
== Remarks ==
* Weitere Modelle der gleichen Serie:
+
* Other models of the same series:
 
* [[Braun LS 40]]
 
* [[Braun LS 40]]
 
* [[Braun LS 60]]
 
* [[Braun LS 60]]
Line 44: Line 71:
 
* [[Braun LS 150PA]]
 
* [[Braun LS 150PA]]
 
* [[Braun LS 200]]
 
* [[Braun LS 200]]
* [[Braun SW 2 (Subwoofer)]]
+
* [[Braun SW 2 (subwoofer)]]
 
 
  
== Bilder ==
 
* Auszug aus Prospekt: Braun LS-150
 
[[Datei:Braun LS-150 PA-Prospekt-1983.jpg]]
 
  
 +
== Pictures ==
 +
* Extract from brochure: Braun LS 150
 +
[[File:Braun LS-150 PA-Prospekt-1983.jpg]]
  
== Berichte ==
 
* Bericht bei "Radiomuseum": Die Standbox LS 150 aktiv wird zusammen mit der passiven Variante LS 150 erstmals im Katalog Sept. 1982 erwähnt, zusätzlich der Verstärkereinschub PA1 als Klappentext der Frontseite. Beide werden als neu beschrieben, der Einschub PA1 ist jedoch ohne nähere technische Angaben. Im darauffolgenden Jahr (Aug. 1983, Braun Hifi. Zukunft als Konzept.) werden beide wiederum als neu bezeichnet, aber die technischen Daten des PA1 sind erstmals ausführlich angegeben. Betrachtet man die aktive Version im Kontext des Braun-Verstärker-Spektrums von 1983 – 1986, fällt auf, dass es in dieser Zeit keinen separaten Braun Vorverstärker gibt. Die LS 150 aktiv kann also nur an Atelier-A2 angeschlossen werden, bei dem man das Signal hinter dem VV auskoppeln kann. Aber es bleibt die Investition in zwei Endverstärker. Erst 1987 erscheint mit dem Atelier CC 4 der adäquate Partner als Vorverstärker (+ Tuner).
 
* Im Nov. 1984 wurde die Box LS 150 (optisch) und der Leistungseinschub PA1 elektrisch modifiziert (jetzt PA1/1). Erkennbar ist die überarbeitete Version an folgenden Merkmalen:
 
** Wegfall der bisher hellen Zierringe an den LS-Chassis
 
** HT-Chassis wurde akustisch überarbeitet
 
** Widerstandsbeschaltung des OV IC 501a wurde geändert, der Kondensator C 622 entfällt, C 621 + C 508  werden modifiziert.
 
  
Technische Daten:Braun LS 150 aktiv
+
== Reports ==
Nennleistung: Tieftonkanal 130 W; Mittel-/Hochton-Kanal 80 W
+
* Report at "Radiomuseum": The floorstanding speaker LS 150 active is mentioned together with the passive variant LS 150 for the first time in the catalogue Sept. 1982, additionally the amplifier insert PA1 as a blurb of the front page. Both are described as new, but the PA1 is without further technical details. In the following year (Aug. 1983, Braun Hifi. Zukunft als Konzept.) both are again described as new, but the technical data of the PA1 are given in detail for the first time. Looking at the active version in the context of the Braun amplifier spectrum from 1983 - 1986, it is noticeable that there is no separate Braun preamplifier during this period. So the LS 150 active can only be connected to Atelier-A2, where you can decouple the signal behind the VV. But there remains the investment in two power amplifiers. It wasn't until 1987 that the Atelier CC 4 appeared as an adequate partner as preamplifier (+ tuner).
Musikleistung: Tieftonkanal 180 W; Mittel-/Hochton-Kanal 120 W
+
In Nov. 1984, the LS 150 speaker (optically) and the PA1 power insert were modified electrically (now PA1/1). The revised version is recognisable by the following features:
Leistungsbandbreite PA 1: 10 Hz … 80 kHz
+
** omission of the previously light-coloured trim rings on the LS drivers.
Leistungsbandbreite LS 150 aktiv: 18 … 30 kHz
+
HT driver has been acoustically reworked
Übergangsfrequenz: 700 Hz
+
** resistor circuit of the OV IC 501a has been changed, capacitor C 622 is omitted, C 621 + C 508 have been modified.
Frequenzweiche: 12 dB/Oktave
 
Dämpfungsfaktor: 80 bei 100 Hz, 45 bei 10 kHz
 
Fremdspannungsabstand: beide Kanäle 100 dB
 
Übersprechdämpfung (1 kHz): 80 dB
 
Eingänge: Cinch
 
Empfindlichkeit: 1 V/22 kΩ, Vorverstärker bzw. 10 V/600 Ω, Endverstärker umschaltbar
 
Gehäuse-Farbe LS 150 aktiv:
 
- 1983 schwarz, weitere Farben auf Anfrage,
 
- 1984 – 86 schwarz/weiß, andere Farben auf Anfrage,
 
- 1987/88 schwarz/grau/redwood
 
Leistungsaufnahme: max. 450 W
 
Leistungsaufnahme Standby: 3 W
 
Bruttovolumen: 70 l
 
Besondere Merkmale:
 
VV und Signaldecoder werden in Standby-Schaltung betrieben, der Endverstärker wird automatisch ein- bzw. ausgeschaltet.
 
Das Modell LS 150 aktiv kann an Vor- oder Endverstärker betrieben werden.
 
  
  
Line 86: Line 90:
  
  
[[Kategorie:Aktivlautsprecher]]
+
[[Category:Active loudspeaker]]

Latest revision as of 02:30, 14 January 2021

Data[edit]

General

  • Manufacturer: Braun
  • Model: LS 150 PA
  • Type: Active loudspeaker
  • Years of manufacture: 1982 - 1988
  • Manufactured in:
  • Colors:
    • 1983: Black, other colors on request
    • 1984 - 1986: Black, White, other colors on request
    • 1987 - 1988: Black, Grey, Redwood
  • Power consumption: max. 450 W, standby: 3 W
  • Dimensions: 1060 x 265 x 300 mm (HxWxD)
  • Gross volume: 70 l
  • Weight: 21,5 kg
  • Original price approx.: 2'300 DM per piece


Connections

  • Number of inputs:
  • Input: Cinch
  • Sensitivity: 1 V / 22 kOhm, preamplifier or 10 V/600 Ohm, power amplifier switchable


Technical data

Amplifier

  • Rated power: woofer channel 130 W; mid/high channel 80 W.
  • Music power: low frequency channel 180 W; mid/high frequency channel 120 W
  • Power bandwidth PA 1: 10 Hz - 80 kHz
  • Power bandwidth LS 150 active: 18 - 30 kHz
  • Crossover frequency: 700 Hz
  • Crossover: 12 dB/octave
  • Attenuation factor: 80 at 100 Hz, 45 at 10 kHz
  • External voltage spacing: both channels 100 dB
  • Crosstalk attenuation (1 kHz): 80 dB


Loudspeaker

  • Construction: 3-way closed, floorstanding speaker
  • Chassis:
    • woofer: 2x 210 mm cone

midrange driver: 1x 50 mm dome tweeter Tweeter: 1x 25 mm dome tweeter

  • Power handling (nominal / music): 150 W / 300 W
  • Efficiency: 91 dB / W / m
  • Frequency response: 18 - 25'000 Hz
  • Transitional ranges: 500 / 4'500 Hz
  • Impedance: 8 Ohm


Special Features

  • VV and signal decoder are operated in standby circuit, the power amplifier is automatically switched on or off.
  • Can be operated at preamplifier or power amplifier
  • Fuses for tweeter and midrange driver
  • Grille made of perforated steel, covered with acoustic fleece on the inside


Remarks[edit]


Pictures[edit]

  • Extract from brochure: Braun LS 150

Braun LS-150 PA-Prospekt-1983.jpg


Reports[edit]

  • Report at "Radiomuseum": The floorstanding speaker LS 150 active is mentioned together with the passive variant LS 150 for the first time in the catalogue Sept. 1982, additionally the amplifier insert PA1 as a blurb of the front page. Both are described as new, but the PA1 is without further technical details. In the following year (Aug. 1983, Braun Hifi. Zukunft als Konzept.) both are again described as new, but the technical data of the PA1 are given in detail for the first time. Looking at the active version in the context of the Braun amplifier spectrum from 1983 - 1986, it is noticeable that there is no separate Braun preamplifier during this period. So the LS 150 active can only be connected to Atelier-A2, where you can decouple the signal behind the VV. But there remains the investment in two power amplifiers. It wasn't until 1987 that the Atelier CC 4 appeared as an adequate partner as preamplifier (+ tuner).

In Nov. 1984, the LS 150 speaker (optically) and the PA1 power insert were modified electrically (now PA1/1). The revised version is recognisable by the following features:

    • omission of the previously light-coloured trim rings on the LS drivers.

HT driver has been acoustically reworked

    • resistor circuit of the OV IC 501a has been changed, capacitor C 622 is omitted, C 621 + C 508 have been modified.


Links[edit]