Difference between revisions of "Kenwood KA-6000"
Frank Brando (talk | contribs) (→Bemerkungen) |
|||
(32 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
− | |||
− | |||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KA-6000 |
− | * | + | * Years of manufacture: 1968 - 1971 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver, wood side panels |
− | * | + | * Type: Amplifier |
− | * | + | * Power consumption: 200 W at full output, 18 W without signal |
− | * | + | * Dimensions (WxHxD): 408 x 134 x 280 mm |
− | * | + | * Weight: 11,5 Kg |
− | * | + | * Original price approx.: 68800 Yen (Japan, 1968), 1100 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Inputs: |
− | ** | + | ** Input sensitivity: |
− | ** Phono 1 MM: 2 | + | ** Phono 1 MM: 2 mV, 100 kOhm, switchable 50µV, 500µV, 200 Ohm. |
− | ** Phono 2 MM: 2. | + | ** Phono 2 MM: 2.2 mV, 100 kOhm |
− | ** | + | ** Microphone: 2 mV, 100 kOhm |
** Tuner: 200mV, 100 kOhm | ** Tuner: 200mV, 100 kOhm | ||
− | ** AUX | + | ** AUX: 200mV, 100 kOhm |
− | ** Tape Play | + | ** Tape Play HD: 2 mV, 100 kOhm |
− | ** | + | ** Tape Play: 200mV, 100 kOhm |
− | * | + | *** Tape DIN: |
− | ** | + | ** Main In: 100 mV |
− | ** Tape Rec | + | * Outputs: |
− | *** DIN: | + | ** Tape Rec: |
− | + | *** DIN: | |
** Pre-Out: | ** Pre-Out: | ||
− | ** | + | ** Headphones: |
− | ** | + | ** Connectors for 2 pairs of speakers |
− | ''' | + | '''Technical Data''' |
− | * | + | * Continuous power (at THD) |
− | ** 8 Ohm: | + | ** 8 Ohm: 2x45 W (RMS, 20Hz...20Khz, 0.05% THD), 2x 58W (8 Ohm, 1Khz) |
− | ** 4 Ohm: | + | ** 4 Ohm: 2x64 W |
− | * | + | * Dynamic power |
** 8 Ohm: 170 W IHF | ** 8 Ohm: 170 W IHF | ||
− | ** 4 Ohm: | + | ** 4 Ohm: 180 W IHF |
− | * | + | * Total harmonic distortion: 0.5% THD at rated power from 20 - 20000 Hz |
− | * | + | * Attenuation factor: 30 at 8 Ohm |
− | * | + | * Frequency response: 10 - 60000 Hz, ± 0.5 dB |
− | * | + | * Power bandwidth: 5 - 60000 Hz, - 3 dB |
− | * | + | * Signal-to-noise ratio: |
− | ** Phono 1 | + | ** Phono 1: |
− | *** | + | *** 50µV: 50 dB |
− | ** | + | *** 500µV: 60 dB |
− | ** | + | *** 2 mV: 70 dB |
− | ** | + | *** Phono 2: 70 dB |
− | ** Tape | + | ** Microphone: 70 dB |
− | + | Tape HD: 70 dB | |
− | ** | + | ** Tuner: 80 dB |
− | ** | + | ** AUX: 80 dB |
− | ** | + | ** Tape Play: 80 dB |
− | * | + | * Tone control |
− | + | Bass: ± 10 dB at 100 Hz | |
− | + | Treble: ± 10 dB at 10 Khz | |
− | * Loudness: + | + | * Loudness: + 6 dB at 100 Hz, + 2 dB at 10 kHz |
− | * High Filter: + | + | * High Filter: +12dB/oct. at 8kHz |
− | * Low Filter: + | + | * Low Filter: +12dB/oct. at 80Hz |
− | * Low Filter (Subsonic): + | + | * Low Filter (Subsonic): +12dB/oct. at 40Hz |
* Muting: 0 dB, - 20 dB | * Muting: 0 dB, - 20 dB | ||
− | ''' | + | '''Special Features''' |
− | * | + | * Pre- and power amplifier separable |
− | + | * Mono / Stereo switch | |
− | * Mono / Stereo | + | * Mono center channel output |
− | |||
− | * Mono | ||
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
** Kenwood KA-2600: | ** Kenwood KA-2600: | ||
*** [[Kenwood KA-2600|KA-2600]] | *** [[Kenwood KA-2600|KA-2600]] | ||
Line 87: | Line 83: | ||
− | * | + | * Predecessor model: |
− | ** [[Kenwood KT-7000|KT-7000]] | + | ** Predecessor model |
+ | |||
+ | * Successor model: | ||
+ | ** Kenwood KA-7002: | ||
+ | *** [[Kenwood KA-7002|KA-7002]] | ||
+ | |||
+ | |||
+ | * Corresponding tuners: | ||
+ | ** Kenwood KT-3000 (according to current sources, probably only offered in Japan): | ||
+ | *** [[Kenwood KT-3000|KT-3000]] | ||
+ | ** Kenwood KT-5000 | ||
+ | *** [[Kenwood KT-5000|KT-5000]] | ||
+ | ** Kenwood KT-7000 | ||
+ | *** [[Kenwood KT-7000|KT-7000]] | ||
+ | ** Kenwood KT-7001 (successor model from 1971) | ||
+ | *** [[Kenwood KT-7001|KT-7001]] | ||
+ | |||
+ | |||
+ | * Kenwood recommended for: | ||
+ | ** Kenwood KF-8011 denoiser | ||
+ | *** [[Kenwood KF-8011|KF-8011]] | ||
+ | ** Kenwood KC-6060 oscilloscope | ||
+ | *** [[Kenwood KC-6060|KC-6060]] | ||
+ | ** Oscilloscope Kenwood KC-6060 A (successor model from 1971 onwards) | ||
+ | *** [[Kenwood KC-6060 A|KC-6060 A]] | ||
+ | |||
+ | |||
+ | * The units were sold outside Japan under the "brand name" Kenwood. In Japan and partly in other markets the company name Trio was used. Renaming to Kenwood Corporation did not occur until 1986 (source Wikipedia). | ||
+ | |||
+ | == Pictures == | ||
+ | * Picture: Kenwood combination KA-6000 / KT-7000 / KC-6060 | ||
+ | [[File:Kenwood KA-6000-KT-7000-KC-6060-1.jpg]] | ||
+ | |||
+ | |||
+ | * Picture: Kenwood Combi KA-6000 / KT-7000 / KC-6060 backside | ||
+ | [[File:Kenwood KA-6000-KT-7000-KC-6060-2.jpg]] | ||
+ | |||
+ | * Excerpt from brochure: Kenwood Combi KA-6000 / KT-7000 | ||
+ | [[File:KA-6000-KT-7000-4.jpg]] | ||
− | |||
− | |||
− | |||
+ | == Reports == | ||
+ | * Report from "Hifi Studio": [[http://www.hifi-studio.de/hifi-klassiker/kenwood/Kenwood_KA6000/KA-6000.htm]] | ||
− | + | * Report from "Good Old Hifi": [[http://www.good-old-hifi.de/kenwood-ka-6000/]] | |
− | * | ||
== Links == | == Links == | ||
− | * | + | * "Audio Heritage, Japan" website: [[http://audio-heritage.jp/TRIO-KENWOOD/amp/ka-6000.html] |
− | * | + | * Wikipedia - Kenwood Electronics, Japan: [https://de.wikipedia.org/wiki/Kenwood_(Electronics)] |
− | [[ | + | [[Category:Integrated amplifier]] |
Latest revision as of 17:28, 24 December 2020
Data[edit]
General
- Manufacturer: Kenwood
- Model: KA-6000
- Years of manufacture: 1968 - 1971
- Made in: Japan
- Color: Silver, wood side panels
- Type: Amplifier
- Power consumption: 200 W at full output, 18 W without signal
- Dimensions (WxHxD): 408 x 134 x 280 mm
- Weight: 11,5 Kg
- Original price approx.: 68800 Yen (Japan, 1968), 1100 DM
Connections
- Inputs:
- Input sensitivity:
- Phono 1 MM: 2 mV, 100 kOhm, switchable 50µV, 500µV, 200 Ohm.
- Phono 2 MM: 2.2 mV, 100 kOhm
- Microphone: 2 mV, 100 kOhm
- Tuner: 200mV, 100 kOhm
- AUX: 200mV, 100 kOhm
- Tape Play HD: 2 mV, 100 kOhm
- Tape Play: 200mV, 100 kOhm
- Tape DIN:
- Main In: 100 mV
- Outputs:
- Tape Rec:
- DIN:
- Pre-Out:
- Headphones:
- Connectors for 2 pairs of speakers
- Tape Rec:
Technical Data
- Continuous power (at THD)
- 8 Ohm: 2x45 W (RMS, 20Hz...20Khz, 0.05% THD), 2x 58W (8 Ohm, 1Khz)
- 4 Ohm: 2x64 W
- Dynamic power
- 8 Ohm: 170 W IHF
- 4 Ohm: 180 W IHF
- Total harmonic distortion: 0.5% THD at rated power from 20 - 20000 Hz
- Attenuation factor: 30 at 8 Ohm
- Frequency response: 10 - 60000 Hz, ± 0.5 dB
- Power bandwidth: 5 - 60000 Hz, - 3 dB
- Signal-to-noise ratio:
- Phono 1:
- 50µV: 50 dB
- 500µV: 60 dB
- 2 mV: 70 dB
- Phono 2: 70 dB
- Microphone: 70 dB
- Phono 1:
Tape HD: 70 dB
- Tuner: 80 dB
- AUX: 80 dB
- Tape Play: 80 dB
- Tone control
Bass: ± 10 dB at 100 Hz Treble: ± 10 dB at 10 Khz
- Loudness: + 6 dB at 100 Hz, + 2 dB at 10 kHz
- High Filter: +12dB/oct. at 8kHz
- Low Filter: +12dB/oct. at 80Hz
- Low Filter (Subsonic): +12dB/oct. at 40Hz
- Muting: 0 dB, - 20 dB
Special Features
- Pre- and power amplifier separable
- Mono / Stereo switch
- Mono center channel output
Remarks[edit]
- Other models in the same series:
- Predecessor model:
- Predecessor model
- Successor model:
- Kenwood KA-7002:
- Corresponding tuners:
- Kenwood recommended for:
- The units were sold outside Japan under the "brand name" Kenwood. In Japan and partly in other markets the company name Trio was used. Renaming to Kenwood Corporation did not occur until 1986 (source Wikipedia).
Pictures[edit]
- Picture: Kenwood combination KA-6000 / KT-7000 / KC-6060
- Picture: Kenwood Combi KA-6000 / KT-7000 / KC-6060 backside
- Excerpt from brochure: Kenwood Combi KA-6000 / KT-7000
Reports[edit]
- Report from "Hifi Studio": [[1]]
- Report from "Good Old Hifi": [[2]]
Links[edit]
- "Audio Heritage, Japan" website: [[3]
- Wikipedia - Kenwood Electronics, Japan: [4]