Difference between revisions of "Kenwood KA-3002"
Frank Brando (talk | contribs) (→Bemerkungen) |
Frank Brando (talk | contribs) (→Bemerkungen) |
||
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KA-3002 |
− | * | + | * Years of manufacture: 1971 - 1973 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver, wood side panels |
− | * | + | * Type: Amplifier |
− | * | + | * Power consumption: 105 W at full output, 15 W without signal |
− | * | + | * Dimensions (WxHxD): 408 x 134 x 280 mm |
− | * | + | * Weight: 8 Kg |
− | * | + | * Original price approx.: 700 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** | + | ** Input sensitivity: |
− | ** Phono 1 MM: 2.5mV, | + | ** Phono 1 MM: 2.5mV, switchable 30 kOhm, 80 kOhm. |
− | ** Phono 2 MM: 2.5mV, 50 kOhm, | + | ** Phono 2 MM: 2.5mV, 50 kOhm, switchable 0.06mV, 200 Ohm |
− | ** | + | ** Microphone: 2.5mV, 50 kOhm |
** Tuner: 200mV, 100 kOhm | ** Tuner: 200mV, 100 kOhm | ||
** AUX 1,2: 200mV, 100 kOhm | ** AUX 1,2: 200mV, 100 kOhm | ||
** Tape Play A, B: 200mV, 100 kOhm | ** Tape Play A, B: 200mV, 100 kOhm | ||
** Main In: 1 V, 50 kOhm | ** Main In: 1 V, 50 kOhm | ||
− | * | + | * Number of Outputs: |
− | ** | + | ** Outputs: |
** Tape Rec A, B: 200mV | ** Tape Rec A, B: 200mV | ||
*** DIN: 40mV | *** DIN: 40mV | ||
*** Dubbing: 200 mV | *** Dubbing: 200 mV | ||
** Pre-Out: | ** Pre-Out: | ||
− | ** | + | ** Headphones: |
− | ** | + | ** Connectors for 2 pairs of speakers |
− | ''' | + | '''Technical Data''' |
− | * | + | * Continuous power (at THD) |
− | ** 8 Ohm: 2x20 W (RMS, 20Hz...20Khz, 0 | + | ** 8 Ohm: 2x20 W (RMS, 20Hz...20Khz, 0.08% THD), 2x 30W (8 Ohm, 1Khz) |
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * dynamic power |
** 8 Ohm: 80 W IHF | ** 8 Ohm: 80 W IHF | ||
** 4 Ohm: 100 W IHF | ** 4 Ohm: 100 W IHF | ||
− | * | + | * Total harmonic distortion: 0.5% THD at rated power from 20 - 20,000 Hz |
− | * | + | * Attenuation factor: 45 at 8 Ohm |
− | * | + | * Frequency response: 18 - 30,000 Hz |
− | * | + | * Signal-to-noise ratio: |
− | ** Phono 1,2: 65dB (MM) | + | ** Phono 1,2: 65dB (MM). |
− | *** Phono 2, 0 | + | *** Phono 2, 0.06mV: 45 dB |
− | ** | + | ** Microphone: 67 dB |
** Tuner: 77dB | ** Tuner: 77dB | ||
− | + | AUX: 77dB | |
** Tape Play: 77dB | ** Tape Play: 77dB | ||
− | * | + | * Tone control |
− | ** Bass: ± 10 dB | + | ** Bass: ± 10 dB at 100Hz |
− | + | Treble: ± 10 dB at 10Khz | |
− | * Loudness: + 8 dB | + | * Loudness: + 8 dB at 100 Hz, + 3 dB at 10 kHz |
− | * High Filter: +12dB/ | + | * High Filter: +12dB/oct. at 7kHz |
− | * Low Filter: +12dB/ | + | * Low Filter: +12dB/oct. at 80Hz |
− | + | Muting: 0 dB, - 20 dB | |
− | ''' | + | '''Special Features''' |
− | * | + | * Pre- and power amplifier separable |
− | * Mono / Stereo | + | * Mono / Stereo switch |
− | * 4- | + | * 4-channel switch |
− | * Linear | + | * Linear switch |
− | * Mono | + | * Mono center channel output |
− | == | + | == Comments == |
− | * | + | * Other models in the same series: |
− | ** Trio KA-3002 ( | + | ** Trio KA-3002 (this model was probably only offered under the Trio name, according to currently available sources): |
*** [[Kenwood KA-3002|KA-3002]] | *** [[Kenwood KA-3002|KA-3002]] | ||
** Kenwood KA-5002: | ** Kenwood KA-5002: | ||
Line 79: | Line 79: | ||
− | * | + | * Previous model: |
+ | ** Kenwood KA-2600: | ||
+ | *** [[Kenwood KA-2600|KA-2600]] | ||
+ | |||
+ | * Successor model: | ||
+ | ** Kenwood KA-4002 (New design line introduced in parallel for Europe?): | ||
+ | *** [[Kenwood KA-4002|KA-4002]] | ||
+ | ** Kenwood KA-4004: | ||
+ | *** [[Kenwood KA-4004|KA-4004]] | ||
+ | |||
+ | |||
+ | * Corresponding tuners | ||
+ | ** Kenwood KT-3000 (according to current sources, probably only offered in Japan): | ||
+ | *** [[Kenwood KT-3000|KT-3000]] | ||
** Kenwood KT-5000 | ** Kenwood KT-5000 | ||
*** [[Kenwood KT-5000|KT-5000]] | *** [[Kenwood KT-5000|KT-5000]] | ||
− | ** | + | ** [[Kenwood KT-7000|KT-7000]] |
+ | *** [[Kenwood KT-7000|KT-7000]] | ||
+ | ** Kenwood KT-7001 | ||
*** [[Kenwood KT-7001|KT-7001]] | *** [[Kenwood KT-7001|KT-7001]] | ||
− | * Kenwood | + | * Kenwood recommended: |
− | ** | + | ** Kenwood KF-6011 denoiser |
*** [[Kenwood KF-6011|KF-6011]] | *** [[Kenwood KF-6011|KF-6011]] | ||
− | * | + | * [[Kenwood KF-8011 Denoiser]] |
*** [[Kenwood KF-8011|KF-8011]] | *** [[Kenwood KF-8011|KF-8011]] | ||
− | ** | + | ** Oscilloscope Kenwood KC-6060 (previous model) |
*** [[Kenwood KC-6060|KC-6060]] | *** [[Kenwood KC-6060|KC-6060]] | ||
− | ** | + | ** Oscilloscope Kenwood KC-6060 A |
*** [[Kenwood KC-6060 A|KC-6060 A]] | *** [[Kenwood KC-6060 A|KC-6060 A]] | ||
− | == | + | == Pictures == |
− | * | + | * Image: Trio KA-3002 |
− | [[ | + | [[File:KA-3002-1.jpg]] |
− | == | + | == Reports == |
Line 106: | Line 121: | ||
− | [[ | + | [[Category:Integrated amplifier]] |
Latest revision as of 17:15, 24 December 2020
Data[edit]
General
- Manufacturer: Kenwood
- Model: KA-3002
- Years of manufacture: 1971 - 1973
- Made in: Japan
- Color: Silver, wood side panels
- Type: Amplifier
- Power consumption: 105 W at full output, 15 W without signal
- Dimensions (WxHxD): 408 x 134 x 280 mm
- Weight: 8 Kg
- Original price approx.: 700 DM
Connections
- Number of inputs:
- Input sensitivity:
- Phono 1 MM: 2.5mV, switchable 30 kOhm, 80 kOhm.
- Phono 2 MM: 2.5mV, 50 kOhm, switchable 0.06mV, 200 Ohm
- Microphone: 2.5mV, 50 kOhm
- Tuner: 200mV, 100 kOhm
- AUX 1,2: 200mV, 100 kOhm
- Tape Play A, B: 200mV, 100 kOhm
- Main In: 1 V, 50 kOhm
- Number of Outputs:
- Outputs:
- Tape Rec A, B: 200mV
- DIN: 40mV
- Dubbing: 200 mV
- Pre-Out:
- Headphones:
- Connectors for 2 pairs of speakers
Technical Data
- Continuous power (at THD)
- 8 Ohm: 2x20 W (RMS, 20Hz...20Khz, 0.08% THD), 2x 30W (8 Ohm, 1Khz)
- 4 Ohm:
- dynamic power
- 8 Ohm: 80 W IHF
- 4 Ohm: 100 W IHF
- Total harmonic distortion: 0.5% THD at rated power from 20 - 20,000 Hz
- Attenuation factor: 45 at 8 Ohm
- Frequency response: 18 - 30,000 Hz
- Signal-to-noise ratio:
- Phono 1,2: 65dB (MM).
- Phono 2, 0.06mV: 45 dB
- Microphone: 67 dB
- Tuner: 77dB
- Phono 1,2: 65dB (MM).
AUX: 77dB
- Tape Play: 77dB
- Tone control
- Bass: ± 10 dB at 100Hz
Treble: ± 10 dB at 10Khz
- Loudness: + 8 dB at 100 Hz, + 3 dB at 10 kHz
- High Filter: +12dB/oct. at 7kHz
- Low Filter: +12dB/oct. at 80Hz
Muting: 0 dB, - 20 dB
Special Features
- Pre- and power amplifier separable
- Mono / Stereo switch
- 4-channel switch
- Linear switch
- Mono center channel output
Comments[edit]
- Other models in the same series:
- Previous model:
- Kenwood KA-2600:
- Successor model:
- Corresponding tuners
- Kenwood recommended:
- Kenwood KF-6011 denoiser
- Kenwood KF-8011 Denoiser
Pictures[edit]
- Image: Trio KA-3002