Difference between revisions of "Technics SE-A 1"
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
== Daten ==
+
__NOTOC__
−
{{Navigation}}
+
== Data ==
−
'''Allgemein'''
+
{{navigation}}
−
* Hersteller: [[Technics]]
+
'''General'''
−
* Modell: SE-A 1
+
* Manufacturer: [[Technics]]
−
* Typ: Stereo DC Endverstärker
+
* Model: SE-A 1
−
* Hinweis: Wurde nur auf Bestellung in Handarbeit gebaut
+
* Type: Stereo DC power amplifier
−
* Baujahre: 1977 - 1980
+
* Note: Was only built to order in manual labor
−
* Hergestellt in: Japan
+
* Years of manufacture: 1977 - 1980
−
* Farbe: Schwarz
+
* Made in: Japan
−
* Leistungsaufnahme: 1000 W, ohne Signal 275 W
+
* Color: Black
−
* Abmessungen: 450 x 249 x 550 mm   
+
* Power consumption: 1000 W, without signal 275 W
−
* Gewicht: ca. 51 kg
+
* Dimensions (WxHxD): 450 x 249 x 550 mm   
−
* Neupreis ca.: 1'000'000 Yen (Japan, 1977), 6000 US-$, 15'500 DM
+
* Weight: approx. 51 kg
 +
* Original price approx.: 1'000'000 Yen (Japan, 1977), 6000 US-$, 15'500 DM
  
  
−
'''Anschlüsse'''
+
'''Connections'''
−
* Anzahl der Eingänge: 2 (1xRückseite, 1xFront, umschaltbar)
+
* Number of inputs: 2 (1x rear, 1x front, switchable)
−
** Eingangsempfindlichkeit: 1 V, max. 10 V, 47 kOhm
+
** Input sensitivity: 1 V, max. 10 V, 47 kOhm
−
* Anzahl der Ausgänge:
+
* Number of outputs:
−
** Kopfhörer: regelbar
+
** Headphones: adjustable
−
** 3 Lautsprecherpaare (hinten)
+
** 3 speaker pairs (rear)
−
** 1 Lautsprecherpaar (Frontseite)
+
** 1 pair of speakers (front)
  
  
−
'''Technische Daten'''
+
'''Technical data'''
−
* Dauerleistung (20-20.000Hz)
+
* Continuous power (20 - 20'000Hz)
−
** 8Ω: 350W+350W
+
8 Ohm: 2x 350 W
−
** 4Ω: 350W+350W
+
4 Ohm: 2x 350 W
−
* Dynamikleistung
+
* Dynamic power
−
** 8Ω:  
+
** 8 Ohm:  
−
** 4Ω:  
+
** 4 Ohm:  
−
* Gesamtklirrfaktor THD: 0.003% (bei Nennleistung und 20Hz - 20kHz)  
+
* Total harmonic distortion: 0.003 % (nominal power, 20 Hz - 20 kHz)  
−
* Dämpfungsfaktor: 100 bei 8 Ohm
+
* Attenuation factor: 100 at 8 Ohm
−
* Frequenzgang:  
+
* Frequency response:  
−
** 20Hz - 20 kHz, +0 -0.05 dB  
+
** Phono RIAA: 20 Hz - 20 kHz, + 0 dB, - 0.05 dB  
−
** DC - 200 kHz, +0 -1dB  
+
** High level: DC - 200 kHz, + 0 dB, - 1 dB  
−
* Leistungsbandbreite: 5Hz - 100kHz (8 Ohm, beide Kanäle, 0.01%)
+
* Power bandwidth: 5 Hz - 100 kHz (8 ohms, both channels, 0.01 %)
−
* Signalrauschabstand: 120 dB (IHF-A)
+
* Signal-to-noise ratio: 120 dB (IHF-A)
−
* Anzeigebereich Instrumente: - 50dB - +10dB   
+
* Display range instruments: - 50dB - +10dB   
  
  
−
'''Besondere Ausstattungen'''
+
'''Special Features'''
−
* Durchgehend in Doppel-Mono aufgebaut
+
* Double-mono construction throughout
−
* Meter-Range je nach Lautsprecher Impedanz umschaltbar: 4 Ohm, 6 Ohm, 8 Ohm, 16 Ohm
+
* Meter range depending on speaker impedance switchable: 4 Ohm, 6 Ohm, 8 Ohm, 16 Ohm
−
* Strom Ein/Aus vom Vorverstärker fernsteuerbar
+
* Power On/Off remote controllable from preamplifier
−
* Input Ein/Aus-schaltbar
+
* Input on/off switchable
−
* Betriebsartwähler: DC, Low Cut 2 Hz
+
* Mode selector: DC, Low Cut 2 Hz
−
* Pegelregler für 4 Lautsprecherpaare L + R
+
* Level control for 4 speaker pairs L + R
  
  
−
== Bemerkungen ==
+
== Remarks ==
−
* Vorgänger Modell der gleichen Serie:
+
* Predecessor model:
−
** 1973: Endverstärker SE-10000
+
** 1973: SE-10000 power amplifier
 
*** [[Technics SE-10000|SE-10000]]
 
*** [[Technics SE-10000|SE-10000]]
  
  
−
* Nachfolgemodell der gleichen Serie:
+
* Successor model:
−
** 2018: Endverstärker SE-R1
+
** 2018: power amplifier SE-R 1
−
*** [[Technics SE-R1|SE-R1]]
+
*** [[Technics SE-R 1|SE-R 1]]
  
  
−
* Weitere Modelle der "Jahrhundert-Serie":
+
* Other models in the "Century Series":
−
** Plattenspieler:  
+
** Turntables:  
 
*** [[Technics SL-1000 MK 2|SL-1000 MK 2]]
 
*** [[Technics SL-1000 MK 2|SL-1000 MK 2]]
−
** Tonabnehmer:  
+
** Cartridges:  
 
*** [[Technics EPC-100 C MK 3|EPC-100 C MK 3]]
 
*** [[Technics EPC-100 C MK 3|EPC-100 C MK 3]]
−
** Vorverstärker:  
+
** Preamplifier:  
 
*** [[Technics SU-A 2|SU-A 2]]
 
*** [[Technics SU-A 2|SU-A 2]]
−
** Endstufe:  
+
** Power amplifier:  
 
*** [[Technics SE-A 1|SE-A 1]]
 
*** [[Technics SE-A 1|SE-A 1]]
−
** Kassetten Tape Deck:  
+
** Cassette Tape Deck:  
 
*** [[Technics RS-M 95|RS-M 95]]
 
*** [[Technics RS-M 95|RS-M 95]]
−
** Bandmaschine:  
+
** Tape machine:  
 
*** [[Technics_RS-1800|RS-1800]]
 
*** [[Technics_RS-1800|RS-1800]]
−
** Lautsprecher:  
+
** Speakers:  
 
*** [[Technics_SB-10000|SB-10000]]
 
*** [[Technics_SB-10000|SB-10000]]
  
  
−
== Bilder ==
+
* At the 1979 Tokyo Audio Fair, the Technics SH-P1 PCM audio processor was introduced to match the series. It was only built to order. It is not known if it was ever built for customers:
−
* Bild: Technics SE-A 1 Front
+
** PCM Audio Processor Technics SH-P1:
−
[[Datei:Technics SE-A1-2.jpg]]
+
*** [[Technics SH-P1|SH-P1]]
  
  
−
* Bild: Technics SE-A 1 Front Links
+
== Pictures ==
−
[[Datei:Technics SE-A1-8.jpg]]
+
* Image: Technics SE-A 1 front
 +
[[File:Technics SE-A1-2.jpg]]
  
  
−
* Bild: Technics SE-A 1 Front Rechts
+
* Picture: Technics SE-A 1 Front Left
−
[[Datei:Technics SE-A1-9.jpg]]
+
[[File:Technics SE-A1-8.jpg]]
  
  
−
* Bild: Technics SE-A 1 Anzeigeinstrumente
+
* Picture: Technics SE-A 1 Front Right
−
[[Datei:Technics SE-A1-7.jpg]]
+
[[File:Technics SE-A1-9.jpg]]
  
  
−
* Bild: Technics SE-A 1 Rückseite
+
* Picture: Technics SE-A 1 display instruments
−
[[Datei:Technics SE-A1-6.jpg]]
+
[[File:Technics SE-A1-7.jpg]]
  
  
−
* Bild: Technics Jahrhundert-Serie bestehend aus:
+
* Image: Technics SE-A 1 rear panel
−
** Plattenspieler Technics SL-1000 MK 2
+
[[File:Technics SE-A1-6.jpg]]
−
** Tonabnehmer Technics EPC-100 C MK 3
 
−
** Vorverstärker Technics SU-A 2
 
−
** Endstufe Technics SE-A 1
 
−
** Kassetten Tape Deck Technics RS-M 95
 
−
** Bandmaschine Technics RS-1800
 
−
** Lautsprecher Technics SB-10000
 
  
−
[[Datei:Technics SE-A1, SU-A2, SB-10000, RS-1800, SL-1000 MK2-9.jpg]]
 
  
 +
* Image: Technics century series consisting of:
 +
** Turntable Technics SL-1000 MK 2
 +
** pickup Technics EPC-100 C MK 3
 +
preamplifier Technics SU-A 2
 +
power amplifier Technics SE-A 1
 +
** Cassette Tape Deck Technics RS-M 95
 +
** Tape machine Technics RS-1800
 +
** Loudspeaker Technics SB-10000
  
−
== Berichte ==
+
 
−
* Bericht bei "Good Old Hifi": [[http://www.good-old-hifi.de/panasonic-technics_se-a1/]]
+
[[File:Technics SE-A1, SU-A2, SB-10000, RS-1800, SL-1000 MK2-10.jpg]]
 +
 
 +
 
 +
* Excerpt from brochure: Technics Combi SU-A 2 / SE-A 1
 +
[[File:Technics SE-A1, SU-A2-Prospekt-1.jpg|1000px]]
 +
 
 +
 
 +
== Reports ==
 +
* Review at "Good Old Hifi": [http://www.good-old-hifi.de/panasonic-technics_se-a1/]
  
  
 
== Links ==
 
== Links ==
−
* Externer Link auf Webseite "Audio Database, Japan": [[http://audio-database.com/TechnicsPanasonic/amp/se-a1-e.html]]
+
* External link to website "Audio Database, Japan": [http://audio-database.com/TechnicsPanasonic/amp/se-a1-e.html]
  
  
−
[[Kategorie:Endstufen]]
+
[[Category:Power Amplifiers]]

Latest revision as of 03:25, 27 November 2020

Data[edit]

General

  • Manufacturer: Technics
  • Model: SE-A 1
  • Type: Stereo DC power amplifier
  • Note: Was only built to order in manual labor
  • Years of manufacture: 1977 - 1980
  • Made in: Japan
  • Color: Black
  • Power consumption: 1000 W, without signal 275 W
  • Dimensions (WxHxD): 450 x 249 x 550 mm
  • Weight: approx. 51 kg
  • Original price approx.: 1'000'000 Yen (Japan, 1977), 6000 US-$, 15'500 DM


Connections

  • Number of inputs: 2 (1x rear, 1x front, switchable)
    • Input sensitivity: 1 V, max. 10 V, 47 kOhm
  • Number of outputs:
    • Headphones: adjustable
    • 3 speaker pairs (rear)
    • 1 pair of speakers (front)


Technical data

  • Continuous power (20 - 20'000Hz)

8 Ohm: 2x 350 W 4 Ohm: 2x 350 W

  • Dynamic power
    • 8 Ohm:
    • 4 Ohm:
  • Total harmonic distortion: 0.003 % (nominal power, 20 Hz - 20 kHz)
  • Attenuation factor: 100 at 8 Ohm
  • Frequency response:
    • Phono RIAA: 20 Hz - 20 kHz, + 0 dB, - 0.05 dB
    • High level: DC - 200 kHz, + 0 dB, - 1 dB
  • Power bandwidth: 5 Hz - 100 kHz (8 ohms, both channels, 0.01 %)
  • Signal-to-noise ratio: 120 dB (IHF-A)
  • Display range instruments: - 50dB - +10dB


Special Features

  • Double-mono construction throughout
  • Meter range depending on speaker impedance switchable: 4 Ohm, 6 Ohm, 8 Ohm, 16 Ohm
  • Power On/Off remote controllable from preamplifier
  • Input on/off switchable
  • Mode selector: DC, Low Cut 2 Hz
  • Level control for 4 speaker pairs L + R


Remarks[edit]

  • Predecessor model:


  • Successor model:
    • 2018: power amplifier SE-R 1



  • At the 1979 Tokyo Audio Fair, the Technics SH-P1 PCM audio processor was introduced to match the series. It was only built to order. It is not known if it was ever built for customers:
    • PCM Audio Processor Technics SH-P1:


Pictures[edit]

  • Image: Technics SE-A 1 front

Technics SE-A1-2.jpg


  • Picture: Technics SE-A 1 Front Left

Technics SE-A1-8.jpg


  • Picture: Technics SE-A 1 Front Right

Technics SE-A1-9.jpg


  • Picture: Technics SE-A 1 display instruments

Technics SE-A1-7.jpg


  • Image: Technics SE-A 1 rear panel

Technics SE-A1-6.jpg


  • Image: Technics century series consisting of:
    • Turntable Technics SL-1000 MK 2
    • pickup Technics EPC-100 C MK 3

preamplifier Technics SU-A 2 power amplifier Technics SE-A 1

    • Cassette Tape Deck Technics RS-M 95
    • Tape machine Technics RS-1800
    • Loudspeaker Technics SB-10000


Technics SE-A1, SU-A2, SB-10000, RS-1800, SL-1000 MK2-10.jpg


  • Excerpt from brochure: Technics Combi SU-A 2 / SE-A 1

Technics SE-A1, SU-A2-Prospekt-1.jpg


Reports[edit]

  • Review at "Good Old Hifi": [1]


Links[edit]

  • External link to website "Audio Database, Japan": [2]
Retrieved from "https://hifi-wiki.com/index.php?title=Technics_SE-A_1&oldid=258589"