Difference between revisions of "Sony TA-1150"
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Sony]] |
| − | * | + | * Model: TA-1150 |
| − | * | + | * Type: Integrated amplifier |
| − | * | + | * Years of manufacture: 1973 - 1977 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: Front silver |
| − | * | + | * Remote control: no |
| − | * | + | * Power consumption: 250 W |
| − | * | + | * Dimensions (WxHxD): 400 x 149 x 316 mm |
| − | * | + | * Weight: 8.3 kg |
| − | * | + | * Original price approx.: 798 DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
** Phono 1, 2 MM: 2 mV / 47 kOhm | ** Phono 1, 2 MM: 2 mV / 47 kOhm | ||
** Tuner: 140 mV / 50 kOhm | ** Tuner: 140 mV / 50 kOhm | ||
** AUX 1, 2: 140 mV / 50 kOhm | ** AUX 1, 2: 140 mV / 50 kOhm | ||
** Tape Play 1, 2: 140 mV / 50 kOhm | ** Tape Play 1, 2: 140 mV / 50 kOhm | ||
| − | + | Tape Play 1 DIN: 140 mV / 50 kOhm | |
** Main In: | ** Main In: | ||
| − | * | + | * Number of Outputs: |
** Tape Rec 1, 2: 140 mV, 10 kOhm | ** Tape Rec 1, 2: 140 mV, 10 kOhm | ||
** Tape Rec 1 DIN: 24 mV, 82 kOhm | ** Tape Rec 1 DIN: 24 mV, 82 kOhm | ||
| − | ** Pre Out: 800 mV, 2 | + | ** Pre Out: 800 mV, 2.7 kOhm |
| − | + | Center Out: 800 mV, 680 Ohm | |
| − | ** | + | ** Headphones (6.3 mm jack) |
| − | ** 2 | + | ** 2 speaker pairs |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Continuous power: |
| − | ** 8 Ohm: 2x 30 W (RMS, 20 - 20'000 Hz), 2x 35 W (RMS, 1'000 Hz) | + | ** 8 Ohm: 2x 30 W (RMS, 20 - 20'000 Hz), 2x 35 W (RMS, 1'000 Hz). |
** 4 Ohm: | ** 4 Ohm: | ||
| − | * | + | * Dynamic power |
** 8 Ohm: 2x 50 W | ** 8 Ohm: 2x 50 W | ||
** 4 Ohm: | ** 4 Ohm: | ||
| − | * | + | * Total harmonic distortion: 0.1 % |
| − | * | + | * Attenuation factor: 100 (8 Ohm) |
| − | * | + | * Frequency response: |
** Phono RIAA: 30 - 15'000 Hz, ± 0,3 dB | ** Phono RIAA: 30 - 15'000 Hz, ± 0,3 dB | ||
** High Level: 10 - 200'000 Hz, + 0 dB, - 2 dB | ** High Level: 10 - 200'000 Hz, + 0 dB, - 2 dB | ||
| − | * | + | * Signal to noise ratio: |
** Phono MM: 70 dB | ** Phono MM: 70 dB | ||
** AUX, Tape: 90 dB | ** AUX, Tape: 90 dB | ||
| − | * | + | * Tone control: |
| − | ** Bass: ± 10 dB | + | ** Bass: ± 10 dB at 100 Hz |
| − | + | Treble: ± 10 dB at 10 kHz | |
| − | * Loudness: | + | * Loudness: yes, + 8 dB at 50 Hz, + 3 dB at 10 kHz |
| − | * High Filter: - 6 dB / | + | * High Filter: - 6 dB / octave above 7 kHz |
| − | * Low Filter (Subsonic): - 6 dB / | + | * Low Filter (Subsonic): - 6 dB / octave below 100 Hz |
* Muting: | * Muting: | ||
| − | ''' | + | '''Special Features''' |
| − | * Aux | + | * Aux front input |
| − | == | + | == Remarks == |
| − | * | + | * Other models in the same series: |
* [[Sony SQA-200]] | * [[Sony SQA-200]] | ||
* [[Sony TA-1120]] | * [[Sony TA-1120]] | ||
| Line 75: | Line 75: | ||
| − | * | + | * [[Corresponding Tuner]] |
* [[Sony ST-5130]] | * [[Sony ST-5130]] | ||
| + | * [[Sony ST-5150]] | ||
| − | == | + | == Pictures == |
| − | * | + | * Image: Sony TA-1150 |
| − | [[ | + | [[File:Sony TA-1150-2.jpg]] |
| − | * | + | * Picture: Sony TA-1150 |
| − | [[ | + | [[File:Sony TA-1150-1.jpg]] |
| − | * | + | * Image: Sony TA-1150 |
| − | [[ | + | [[File:Ta1150.jpg]] |
| − | == | + | == Reports == |
| Line 98: | Line 99: | ||
| − | [[ | + | [[Category:Integrated amplifier]] |
Latest revision as of 06:14, 25 November 2020
Data
General
- Manufacturer: Sony
- Model: TA-1150
- Type: Integrated amplifier
- Years of manufacture: 1973 - 1977
- Made in: Japan
- Color: Front silver
- Remote control: no
- Power consumption: 250 W
- Dimensions (WxHxD): 400 x 149 x 316 mm
- Weight: 8.3 kg
- Original price approx.: 798 DM
Connections
- Number of inputs:
- Phono 1, 2 MM: 2 mV / 47 kOhm
- Tuner: 140 mV / 50 kOhm
- AUX 1, 2: 140 mV / 50 kOhm
- Tape Play 1, 2: 140 mV / 50 kOhm
Tape Play 1 DIN: 140 mV / 50 kOhm
- Main In:
- Number of Outputs:
- Tape Rec 1, 2: 140 mV, 10 kOhm
- Tape Rec 1 DIN: 24 mV, 82 kOhm
- Pre Out: 800 mV, 2.7 kOhm
Center Out: 800 mV, 680 Ohm
- Headphones (6.3 mm jack)
- 2 speaker pairs
Technical Data
- Continuous power:
- 8 Ohm: 2x 30 W (RMS, 20 - 20'000 Hz), 2x 35 W (RMS, 1'000 Hz).
- 4 Ohm:
- Dynamic power
- 8 Ohm: 2x 50 W
- 4 Ohm:
- Total harmonic distortion: 0.1 %
- Attenuation factor: 100 (8 Ohm)
- Frequency response:
- Phono RIAA: 30 - 15'000 Hz, ± 0,3 dB
- High Level: 10 - 200'000 Hz, + 0 dB, - 2 dB
- Signal to noise ratio:
- Phono MM: 70 dB
- AUX, Tape: 90 dB
- Tone control:
- Bass: ± 10 dB at 100 Hz
Treble: ± 10 dB at 10 kHz
- Loudness: yes, + 8 dB at 50 Hz, + 3 dB at 10 kHz
- High Filter: - 6 dB / octave above 7 kHz
- Low Filter (Subsonic): - 6 dB / octave below 100 Hz
- Muting:
Special Features
- Aux front input
Remarks
- Other models in the same series:
- Sony SQA-200
- Sony TA-1120
- Sony TA-1130
- Sony TA-1140
- Sony TA-1150
- Sony TA-2000 F
- Sony TA-2001 F
- Sony TA-3130 F
- Sony TA-3140 F
- Sony TA-3200 F
Pictures
- Image: Sony TA-1150
- Picture: Sony TA-1150
- Image: Sony TA-1150


