Difference between revisions of "Sanyo DCX-3000"
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Sanyo]] |
− | * | + | * Model: DCX-3000 |
− | + | Type: Quadraphonic Receiver | |
− | * | + | * Years of manufacture: 1974 - 1977 |
− | * | + | * Made in: Japan |
− | * | + | * Color: front silver, housing walnut decor |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 90 W max. |
− | * | + | * Dimensions: 473 x 120 x 343 mm (WxHxD) |
− | * | + | * Weight: 7.3 kg |
− | * | + | * Original price approx.: 798 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono MM: 5 mV / 50 kOhm, max. 150 mV | + | ** Phono MM: 5 mV / 50 kOhm, max. 150 mV. |
− | ** | + | ** Microphone: 2,5 mV / 10 kOhm |
** AUX: 200 mV / 100 kOhm | ** AUX: 200 mV / 100 kOhm | ||
** Tape Play 1, 2: 300 mV / 100 kOhm | ** Tape Play 1, 2: 300 mV / 100 kOhm | ||
− | + | Tape Play 1 DIN: 300 mV / 100 kOhm | |
− | ** | + | ** Antenna FM (75/300 Ohm), AM |
− | * | + | * Number of outputs: |
** Tape Rec 1: 180 mV, 10 kOhm | ** Tape Rec 1: 180 mV, 10 kOhm | ||
** Tape Rec 1 DIN: 50 mV, 50 kOhm | ** Tape Rec 1 DIN: 50 mV, 50 kOhm | ||
− | ** 2x | + | ** 2x headphones (6.3 mm jack, front and rear) |
− | ** 2 | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power Quadro: |
** 8 Ohm: 4x 10 W | ** 8 Ohm: 4x 10 W | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Continuous power stereo: |
** 8 Ohm: 2x 15 W | ** 8 Ohm: 2x 15 W | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Dynamic power |
** 8 Ohm: 60 W | ** 8 Ohm: 60 W | ||
** 4 Ohm: 80 W | ** 4 Ohm: 80 W | ||
− | * | + | * Total harmonic distortion: 0.8 |
− | * | + | * Attenuation factor: 30 (8 Ohm) |
− | * | + | * Frequency response: |
− | ** Phono RIAA: 20 - 20'000 Hz, ± 0 | + | ** Phono RIAA: 20 - 20'000 Hz, ± 0.2 dB |
− | + | High Level: 20 - 40'000 Hz, ± 1,5 dB | |
− | + | Signal to Noise Ratio: | |
** Phono MM: 60 dB | ** Phono MM: 60 dB | ||
− | ** | + | ** Microphone: 70 dB |
** AUX, Tape: 80 dB | ** AUX, Tape: 80 dB | ||
− | * | + | * Tone control: |
** Bass: + 8 dB, - 10 dB (100 Hz) | ** Bass: + 8 dB, - 10 dB (100 Hz) | ||
− | ** | + | ** Treble: + 8 dB, - 10 dB (10 kHz) |
− | * Loudness: + | + | * Loudness: + 10 dB at 100 Hz, + 5 dB at 10 kHz |
* High Filter: | * High Filter: | ||
* Low Filter (Subsonic): | * Low Filter (Subsonic): | ||
Line 62: | Line 62: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
** MW: 525 - 1605 kHz | ** MW: 525 - 1605 kHz | ||
− | * | + | * Frequency response: 30 - 15,000 Hz, ± 3 dB |
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 3.5 µV (IHF) |
− | + | MW: 25 µV | |
− | + | Distortion factor: | |
− | ** | + | ** FM: 0.8 % |
− | * | + | * Signal-to-noise ratio: |
− | ** | + | ** FM: 60 dB (mono), 50 dB (stereo) |
− | ** MW: | + | ** MW: 40 dB |
− | * | + | * Channel separation: |
− | ** | + | ** FM: 30 dB (at 1 kHz) |
− | * | + | * Selectivity: |
− | ** | + | ** FM: 30 dB |
− | ** MW: | + | ** MW: 30 dB |
− | * | + | * Equal wave selection: |
− | ** | + | ** FM: 1.3 dB |
− | * | + | * Spurious wave selection: |
− | ** | + | ** FM: 50 dB |
− | * | + | * Image frequency attenuation: |
− | ** | + | ** FM: 45 dB |
− | ** MW: | + | ** MW: 35 dB |
− | + | IF attenuation: | |
− | ** | + | ** FM: 75 dB |
− | ** MW: | + | ** MW: 30 dB |
− | * AM | + | * AM suppression: 40 dB |
− | ''' | + | '''Special Features''' |
− | * | + | * Switchable for Quadro methods: |
− | |||
** SQ-Logic | ** SQ-Logic | ||
− | ** RM | + | ** RM decoder |
− | ** CD-4 | + | ** CD-4 with additional demodulator |
− | * 4 | + | * 4 level controls for the 4 channels |
− | + | * 2/4 channel selector | |
− | * 2/4 | + | * Microphone Mixer |
− | * | ||
− | == | + | == Comments == |
− | * | + | * Other models in the same series: |
+ | * [[Sanyo DCX-2700]] | ||
* [[Sanyo DCX-3000]] | * [[Sanyo DCX-3000]] | ||
* [[Sanyo DCX-3100]] | * [[Sanyo DCX-3100]] | ||
+ | * [[Sanyo DCX-3250]] | ||
* [[Sanyo DCX-3300]] | * [[Sanyo DCX-3300]] | ||
* [[Sanyo DCX-3450]] | * [[Sanyo DCX-3450]] | ||
Line 114: | Line 114: | ||
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Sanyo DCX-3000 |
− | [[ | + | [[File:Sanyo DCX-3000-Prospekt-1.jpg]] |
− | == | + | == Reports == |
Line 125: | Line 125: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 05:39, 15 November 2020
Data[edit]
General
- Manufacturer: Sanyo
- Model: DCX-3000
Type: Quadraphonic Receiver
- Years of manufacture: 1974 - 1977
- Made in: Japan
- Color: front silver, housing walnut decor
- Remote control: no
- Power consumption: 90 W max.
- Dimensions: 473 x 120 x 343 mm (WxHxD)
- Weight: 7.3 kg
- Original price approx.: 798 DM
Connections
- Number of inputs:
- Phono MM: 5 mV / 50 kOhm, max. 150 mV.
- Microphone: 2,5 mV / 10 kOhm
- AUX: 200 mV / 100 kOhm
- Tape Play 1, 2: 300 mV / 100 kOhm
Tape Play 1 DIN: 300 mV / 100 kOhm
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- Tape Rec 1: 180 mV, 10 kOhm
- Tape Rec 1 DIN: 50 mV, 50 kOhm
- 2x headphones (6.3 mm jack, front and rear)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power Quadro:
- 8 Ohm: 4x 10 W
- 4 Ohm:
- Continuous power stereo:
- 8 Ohm: 2x 15 W
- 4 Ohm:
- Dynamic power
- 8 Ohm: 60 W
- 4 Ohm: 80 W
- Total harmonic distortion: 0.8
- Attenuation factor: 30 (8 Ohm)
- Frequency response:
- Phono RIAA: 20 - 20'000 Hz, ± 0.2 dB
High Level: 20 - 40'000 Hz, ± 1,5 dB Signal to Noise Ratio:
- Phono MM: 60 dB
- Microphone: 70 dB
- AUX, Tape: 80 dB
- Tone control:
- Bass: + 8 dB, - 10 dB (100 Hz)
- Treble: + 8 dB, - 10 dB (10 kHz)
- Loudness: + 10 dB at 100 Hz, + 5 dB at 10 kHz
- High Filter:
- Low Filter (Subsonic):
- Muting:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 525 - 1605 kHz
- Frequency response: 30 - 15,000 Hz, ± 3 dB
- Input sensitivity:
- FM: 3.5 µV (IHF)
MW: 25 µV Distortion factor:
- FM: 0.8 %
- Signal-to-noise ratio:
- FM: 60 dB (mono), 50 dB (stereo)
- MW: 40 dB
- Channel separation:
- FM: 30 dB (at 1 kHz)
- Selectivity:
- FM: 30 dB
- MW: 30 dB
- Equal wave selection:
- FM: 1.3 dB
- Spurious wave selection:
- FM: 50 dB
- Image frequency attenuation:
- FM: 45 dB
- MW: 35 dB
IF attenuation:
- FM: 75 dB
- MW: 30 dB
- AM suppression: 40 dB
Special Features
- Switchable for Quadro methods:
- SQ-Logic
- RM decoder
- CD-4 with additional demodulator
- 4 level controls for the 4 channels
- 2/4 channel selector
- Microphone Mixer
Comments[edit]
- Other models in the same series:
- Sanyo DCX-2700
- Sanyo DCX-3000
- Sanyo DCX-3100
- Sanyo DCX-3250
- Sanyo DCX-3300
- Sanyo DCX-3450
- Sanyo DCX-3500
Pictures[edit]
- Extract from brochure: Sanyo DCX-3000