Difference between revisions of "Sanyo GCX-7060"
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Sanyo]] |
− | * | + | * Model: GCX-7060 |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1978 - 1980 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver |
− | * | + | * Remote control: No |
− | * | + | * Power consumption: 280 W |
− | * | + | * Dimensions (WxHxD): 440 x 145 x 300 mm |
− | * | + | * Weight: 13.6 kg |
− | * | + | * Original price approx.: 998 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** | + | ** Input sensitivity: |
− | ** Phono MM: 1 | + | ** Phono MM: 1.5 mV, 470 kOhm, 200 mV max. |
** AUX 1, 2: 150 mV, 470 kOhm | ** AUX 1, 2: 150 mV, 470 kOhm | ||
** Tape Play A, B: 150 mV, 470 kOhm | ** Tape Play A, B: 150 mV, 470 kOhm | ||
− | + | FM antenna socket: 75 Ohm coaxial | |
− | ** | + | ** VHF / MW antenna socket: 300 Ohm |
− | * | + | * Number of outputs: |
− | ** | + | ** Outputs: |
** Tape Rec 1, 2: 100 mV, 100 Ohm | ** Tape Rec 1, 2: 100 mV, 100 Ohm | ||
** Tape Rec 1, 2 DIN: 20 mV, 20 kOhm | ** Tape Rec 1, 2 DIN: 20 mV, 20 kOhm | ||
− | + | Headphones: 4 - 16 Ohm | |
− | ** | + | ** Connectors for 2 pairs of speakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (at distortion) |
** 8 Ohm: 2x 36 W (RMS), 2x 40 W (1 kHz) | ** 8 Ohm: 2x 36 W (RMS), 2x 40 W (1 kHz) | ||
** 4 Ohm: 2x 45 W | ** 4 Ohm: 2x 45 W | ||
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: < 0.1 % |
− | * | + | * Attenuation factor: 60 |
− | * | + | * Frequency response: 20 Hz - 40 kHz |
− | * | + | * Signal-to-noise ratio: |
** Phono: 70 dB | ** Phono: 70 dB | ||
− | + | High level: 90 dB | |
− | * | + | * Tone control: |
− | ** Bass: | + | ** Bass: ± 10 dB / 100 Hz |
− | + | Treble: ± 10 dB / 10 kHz | |
− | * Loudness: | + | * Loudness: + 8 dB / 100 Hz, + 8 dB / 10 kHz |
− | * High Filter: - 6 dB / | + | * High Filter: - 6 dB / 6 KHz |
− | * Low Filter (Subsonic): | + | * Low Filter (Subsonic): - 6 dB / 50 Hz |
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW, LW, KW 1, KW 2, KW 3 |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
− | + | MW: 516 - 1605 kHz | |
− | + | LW: 150 - 350 kHz | |
− | ** | + | ** CW 1: 1.8 - 3.9 MHz |
− | ** | + | ** CW 2: 4.6 - 7.6 MHz |
− | ** | + | ** CW 3: 8.2 - 14.8 MHz |
− | * | + | * Frequency response: 20 - 15'000 Hz (±3 dB) |
− | * | + | * Input sensitivity: |
− | ** Mono: 0 | + | ** Mono: 0.9 µV at 26 dB |
− | + | Stereo: 35 µV at 46 dB | |
** MW: 350 µV | ** MW: 350 µV | ||
− | + | LW: 500 µV | |
− | * | + | * Distortion factor: 0.2 |
− | * | + | * Signal-to-noise ratio: |
** Mono: 60 dB | ** Mono: 60 dB | ||
− | + | Stereo: 54 dB | |
− | * | + | * Channel separation: 35 dB |
− | * | + | * selectivity: > 65 dB |
− | * | + | * Co-wave selection: 1.0 dB |
− | * | + | * Spurious wave selection: |
− | * | + | * Image Frequency Attenuation: |
− | * | + | * IF attenuation: > 90 dB |
− | * AM | + | * AM suppression: > 50 dB |
− | * | + | * Station memory: 5x FM, 5x MW |
− | ''' | + | '''Special Features''' |
− | * 2 | + | * 2 large VU meters |
− | * | + | * Front connection Tape 2 |
− | * 6- | + | * 6-wave tuner |
− | * | + | * VHF Muting |
− | == | + | == Remarks == |
− | * | + | * Receivers of the same series: |
* [[Sanyo GCX-7060]] | * [[Sanyo GCX-7060]] | ||
− | * | + | * Corresponding tape deck: |
* [[Sanyo RD-7058]] | * [[Sanyo RD-7058]] | ||
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Sanyo GXC-7060, RD-7058 |
− | [[ | + | [[File:Sanyo GXC-7060-RD-7058-Prospekt-1979.jpg]] |
− | |||
− | == | + | == Reports == |
Line 112: | Line 111: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 07:47, 19 October 2020
Data[edit]
General
- Manufacturer: Sanyo
- Model: GCX-7060
- Type: Receiver
- Years of manufacture: 1978 - 1980
- Made in: Japan
- Color: Silver
- Remote control: No
- Power consumption: 280 W
- Dimensions (WxHxD): 440 x 145 x 300 mm
- Weight: 13.6 kg
- Original price approx.: 998 DM
Connections
- Number of inputs:
- Input sensitivity:
- Phono MM: 1.5 mV, 470 kOhm, 200 mV max.
- AUX 1, 2: 150 mV, 470 kOhm
- Tape Play A, B: 150 mV, 470 kOhm
FM antenna socket: 75 Ohm coaxial
- VHF / MW antenna socket: 300 Ohm
- Number of outputs:
- Outputs:
- Tape Rec 1, 2: 100 mV, 100 Ohm
- Tape Rec 1, 2 DIN: 20 mV, 20 kOhm
Headphones: 4 - 16 Ohm
- Connectors for 2 pairs of speakers
Technical Data
Amplifier
- Continuous power (at distortion)
- 8 Ohm: 2x 36 W (RMS), 2x 40 W (1 kHz)
- 4 Ohm: 2x 45 W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: < 0.1 %
- Attenuation factor: 60
- Frequency response: 20 Hz - 40 kHz
- Signal-to-noise ratio:
- Phono: 70 dB
High level: 90 dB
- Tone control:
- Bass: ± 10 dB / 100 Hz
Treble: ± 10 dB / 10 kHz
- Loudness: + 8 dB / 100 Hz, + 8 dB / 10 kHz
- High Filter: - 6 dB / 6 KHz
- Low Filter (Subsonic): - 6 dB / 50 Hz
Tuner
- Reception: FM, MW, LW, KW 1, KW 2, KW 3
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 516 - 1605 kHz LW: 150 - 350 kHz
- CW 1: 1.8 - 3.9 MHz
- CW 2: 4.6 - 7.6 MHz
- CW 3: 8.2 - 14.8 MHz
- Frequency response: 20 - 15'000 Hz (±3 dB)
- Input sensitivity:
- Mono: 0.9 µV at 26 dB
Stereo: 35 µV at 46 dB
- MW: 350 µV
LW: 500 µV
- Distortion factor: 0.2
- Signal-to-noise ratio:
- Mono: 60 dB
Stereo: 54 dB
- Channel separation: 35 dB
- selectivity: > 65 dB
- Co-wave selection: 1.0 dB
- Spurious wave selection:
- Image Frequency Attenuation:
- IF attenuation: > 90 dB
- AM suppression: > 50 dB
- Station memory: 5x FM, 5x MW
Special Features
- 2 large VU meters
- Front connection Tape 2
- 6-wave tuner
- VHF Muting
Remarks[edit]
- Receivers of the same series:
- Sanyo GCX-7060
- Corresponding tape deck:
- Sanyo RD-7058
Pictures[edit]
- Extract from brochure: Sanyo GXC-7060, RD-7058