Difference between revisions of "Kenwood KR-9600"
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KR-9600 |
− | * | + | * Years of manufacture: 1976 - 1979 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 820 W at full level |
− | * | + | * Dimensions: 580 x 169 x 420 mm (WxHxD) |
− | * | + | * Weight: 24 kg |
− | * | + | * Original price approx.: 750 US-$, 3'000 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
** 2x Phono MM (Cinch): 2,5/5,0 mV / 50 kOhm | ** 2x Phono MM (Cinch): 2,5/5,0 mV / 50 kOhm | ||
− | + | 2x Tape In (Cinch/DIN): 150 mV / 50 kOhm | |
** AUX (Cinch): 150 mV / 80 kOhm | ** AUX (Cinch): 150 mV / 80 kOhm | ||
− | ** | + | ** Microphone: 1,5 mV / 50 kOhm |
− | ** | + | ** Antenna FM (75/300 Ohm), AM |
− | * | + | * Number of outputs: |
− | ** 2x Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN) | + | ** 2x Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN). |
− | + | FM Quadradial | |
− | ** | + | ** Headphones (6.3 mm jack, front) |
− | ** 3 | + | ** 3 pairs of loudspeakers |
− | ''' | + | '''Technical Specifications''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power |
− | ** 8 Ohm: 2x 160 W (RMS, | + | ** 8 Ohm: 2x 160 W (RMS, both channels, 20-20,000 Hz, 0.08 %) |
− | ** 4 Ohm: 2x 200 W (RMS, | + | ** 4 Ohm: 2x 200 W (RMS, both channels, 20-20,000 Hz, 0.08 %) |
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: 750 W | ** 4 Ohm: 750 W | ||
− | * | + | * Total harmonic distortion: 0.08% (at nominal power) |
− | * | + | * Attenuation factor: 55 (8 ohms) |
− | * | + | * Frequency response: |
− | ** | + | ** Preamplifier: 20 - 40,000 Hz (+0/-0.2 dB). |
− | ** | + | ** Power bandwidth: 5 - 50,000 Hz |
− | * | + | * Signal-to-noise ratio: |
− | ** Phono MM: 70/76 dB (Phono 1/2) | + | ** Phono MM: 70/76 dB (Phono 1/2). |
− | + | AUX, Tape: 95 dB | |
− | ** | + | ** Microphone: 65 dB |
− | * | + | * Stereo channel separation: |
− | * | + | * Tone control: |
− | ** Bass: ±10 dB | + | ** Bass: ±10 dB at 100 Hz |
− | ** | + | ** Mid: ±10 dB at 800 Hz |
− | + | Treble: ±10 dB at 10 kHz | |
* Loudness: +5/+6 dB (100 Hz/10 kHz) | * Loudness: +5/+6 dB (100 Hz/10 kHz) | ||
− | * High Filter: -9 dB | + | * High Filter: -9 dB at 10 kHz |
− | * Low Filter (Subsonic): -9 dB | + | * Low Filter (Subsonic): -9 dB at 100 Hz |
− | * Mute: FM | + | * Mute: FM muting |
− | * Direct/Line-Straight: | + | * Direct/Line-Straight: yes (Tone Defeat) |
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
− | + | MW: 525 - 1605 kHz | |
− | * | + | * Frequency response: 20 - 15,000 Hz (+0/-1.5 dB, FM) |
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 1.5 µV (IHF) |
− | + | MW: 10 µV | |
− | + | Distortion factor: | |
− | ** | + | ** FM: 0.15% (mono), 0.2% (stereo). |
− | * | + | * Signal-to-noise ratio: |
− | ** | + | ** FM: 75 dB (mono), 70 dB (stereo) |
− | + | MW: 50 dB | |
− | * | + | * Channel separation: |
− | ** | + | ** FM: 45 dB (at 1 kHz) |
− | * | + | * Selectivity: (IHF) |
− | + | FM: 83 dB | |
** MW: 35 dB | ** MW: 35 dB | ||
− | * | + | * Equal wave selection: |
− | ** | + | ** FM: 1.3 dB |
− | * | + | * Spurious wave selection: |
− | ** | + | ** FM: 115 dB |
− | * | + | * Image frequency attenuation: |
− | ** | + | ** FM: 100 dB |
** MW: 70 dB | ** MW: 70 dB | ||
− | * | + | * IF attenuation: |
− | ** | + | ** FM: 115 dB |
− | * AM | + | * AM suppression: 60 dB |
− | ''' | + | '''Special Features''' |
− | * | + | * Handles |
− | * | + | * Microphone mixable |
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
** [[Kenwood KR-2600]] | ** [[Kenwood KR-2600]] | ||
** [[Kenwood KR-3600]] | ** [[Kenwood KR-3600]] | ||
Line 106: | Line 106: | ||
− | == | + | == Pictures == |
− | * | + | * Image: Kenwood KR-9600 |
− | [[ | + | [[File:Kenwood KR-9600-3.jpg|1500px]] |
− | * | + | * Excerpt from brochure: Kenwood KR-9600 |
− | [[ | + | [[File:Kenwood KR-9600-Prospekt-2.jpg|1000px]] |
− | == | + | == Reviews == |
− | * | + | * Review at The Vintage Knob: [http://www.thevintageknob.org/kenwood-KR-9600.html] |
Line 122: | Line 122: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 08:26, 13 October 2020
Data[edit]
General
- Manufacturer: Kenwood
- Model: KR-9600
- Years of manufacture: 1976 - 1979
- Made in: Japan
- Color: Silver
- Remote control: no
- Power consumption: 820 W at full level
- Dimensions: 580 x 169 x 420 mm (WxHxD)
- Weight: 24 kg
- Original price approx.: 750 US-$, 3'000 DM
Connections
- Number of inputs:
- 2x Phono MM (Cinch): 2,5/5,0 mV / 50 kOhm
2x Tape In (Cinch/DIN): 150 mV / 50 kOhm
- AUX (Cinch): 150 mV / 80 kOhm
- Microphone: 1,5 mV / 50 kOhm
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- 2x Tape Out (Cinch/DIN): 150 mV / 100 Ohm (Cinch); 30 mV / 80 kOhm (DIN).
FM Quadradial
- Headphones (6.3 mm jack, front)
- 3 pairs of loudspeakers
Technical Specifications
Amplifier
- Continuous power
- 8 Ohm: 2x 160 W (RMS, both channels, 20-20,000 Hz, 0.08 %)
- 4 Ohm: 2x 200 W (RMS, both channels, 20-20,000 Hz, 0.08 %)
- Dynamic power
- 8 Ohm:
- 4 Ohm: 750 W
- Total harmonic distortion: 0.08% (at nominal power)
- Attenuation factor: 55 (8 ohms)
- Frequency response:
- Preamplifier: 20 - 40,000 Hz (+0/-0.2 dB).
- Power bandwidth: 5 - 50,000 Hz
- Signal-to-noise ratio:
- Phono MM: 70/76 dB (Phono 1/2).
AUX, Tape: 95 dB
- Microphone: 65 dB
- Stereo channel separation:
- Tone control:
- Bass: ±10 dB at 100 Hz
- Mid: ±10 dB at 800 Hz
Treble: ±10 dB at 10 kHz
- Loudness: +5/+6 dB (100 Hz/10 kHz)
- High Filter: -9 dB at 10 kHz
- Low Filter (Subsonic): -9 dB at 100 Hz
- Mute: FM muting
- Direct/Line-Straight: yes (Tone Defeat)
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 525 - 1605 kHz
- Frequency response: 20 - 15,000 Hz (+0/-1.5 dB, FM)
- Input sensitivity:
- FM: 1.5 µV (IHF)
MW: 10 µV Distortion factor:
- FM: 0.15% (mono), 0.2% (stereo).
- Signal-to-noise ratio:
- FM: 75 dB (mono), 70 dB (stereo)
MW: 50 dB
- Channel separation:
- FM: 45 dB (at 1 kHz)
- Selectivity: (IHF)
FM: 83 dB
- MW: 35 dB
- Equal wave selection:
- FM: 1.3 dB
- Spurious wave selection:
- FM: 115 dB
- Image frequency attenuation:
- FM: 100 dB
- MW: 70 dB
- IF attenuation:
- FM: 115 dB
- AM suppression: 60 dB
Special Features
- Handles
- Microphone mixable
Remarks[edit]
- Other models in the same series:
Pictures[edit]
- Image: Kenwood KR-9600
- Excerpt from brochure: Kenwood KR-9600
Reviews[edit]
- Review at The Vintage Knob: [1]