Difference between revisions of "Rotel RMB-100"
(→Daten) |
|||
| (9 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Rotel]] |
| − | * | + | * Model: RMB-100 |
| − | * | + | * Type: Mono power amplifier |
| − | * | + | * Years of manufacture: 1995 - 1999 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: Black |
| − | * | + | * Remote control: no |
| − | * | + | * Power consumption: 500 watts, 1.2 watts on stand-by |
| − | * | + | * Dimensions: 165 x 220 x 175 mm (WxHxD) |
| − | * | + | * Weight: 7.5 kg |
| − | * | + | * Original price approx.: discontinued price in USA 800 dollars per pair, before 700 dollars per piece, Germany 1'400 DM per piece |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: 2 |
| − | ** | + | ** 1 x Cinch: 24 KOhm, |
| − | + | ** 1 x XLR: | |
| − | + | ** No true symmetrical operation. XLR - Input is converted to single-ended. | |
| − | + | * Number of outputs: | |
| − | * | + | ** 2 LS terminal for bi-wiring. |
| − | |||
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Continuous power (at distortion factor) |
| − | + | 8 Ohm: 120 W | |
| − | + | 4 Ohm: 200 W | |
| − | + | *** Only operation from 4 to 16 Ohm, no 2 Ohm operation possible! | |
| − | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
| − | * | + | * Total harmonic distortion: < 0.03% |
| − | * | + | * Attenuation factor: 500 |
| − | * | + | * Frequency response: 20 - 20,000 Hz (+ 0 dB, -0.4 dB) |
| − | * | + | * Signal-to-noise ratio: 100 dB |
| − | * | + | * Stereo Channel Separation: |
| − | Voltage Gain: 29 | + | * Voltage Gain: 29.2 dB |
| − | Output | + | * Output impedance 1 mOhm |
| − | ''' | + | '''Special Features''' |
| − | * | + | * Mos-FET, THX - certified |
| − | + | * Switching position: On, Off, Stand-By | |
| − | + | * Construction: Input Buffer (Low-Noise differential amplifier which converts balanced-inputs to single-ended signals), | |
| − | + | ** Power Amplifier (Mos-Fet), dual-complemantary differential input stage | |
| − | + | Power Supply, 300 W transformer, 2 x 10,000 µF | |
| − | |||
| − | == | + | == Remarks == |
| + | * Other models of the same series: | ||
| + | * [[Rotel RMB-100]] | ||
| + | * [[Rotel RMB-1048]] | ||
| + | * [[Rotel RMB-1066]] | ||
| + | * [[Rotel RMB-1075]] | ||
| + | * [[Rotel RMB-1076]] | ||
| + | * [[Rotel RMB-1077]] | ||
| + | * [[Rotel RMB-1085]] | ||
| + | * [[Rotel RMB-1095]] | ||
| − | |||
| − | * | + | == Pictures == |
| − | + | * Extract from special print "Image Hifi 1/1996": Rotel RC-995, Rotel RMB-100 | |
| + | [[File:Rotel RC-995-RBM-100-Sonderdruck 1996 Kopie.jpg]] | ||
| − | |||
| − | == | + | == Reports == |
| + | |||
== Links == | == Links == | ||
| − | [http://www.rotel.com/content/manuals_archived/rmb100.pdf | + | * [http://www.rotel.com/content/manuals_archived/rmb100.pdf English-language manual as PDF file on ROTEL.com] |
| − | [[ | + | |
| + | |||
| + | [[Category:Power Amplifiers]] | ||
Latest revision as of 01:14, 30 September 2020
Data[edit]
General
- Manufacturer: Rotel
- Model: RMB-100
- Type: Mono power amplifier
- Years of manufacture: 1995 - 1999
- Made in: Japan
- Color: Black
- Remote control: no
- Power consumption: 500 watts, 1.2 watts on stand-by
- Dimensions: 165 x 220 x 175 mm (WxHxD)
- Weight: 7.5 kg
- Original price approx.: discontinued price in USA 800 dollars per pair, before 700 dollars per piece, Germany 1'400 DM per piece
Connections
- Number of inputs: 2
- 1 x Cinch: 24 KOhm,
- 1 x XLR:
- No true symmetrical operation. XLR - Input is converted to single-ended.
- Number of outputs:
- 2 LS terminal for bi-wiring.
Technical Data
- Continuous power (at distortion factor)
8 Ohm: 120 W 4 Ohm: 200 W
- Only operation from 4 to 16 Ohm, no 2 Ohm operation possible!
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: < 0.03%
- Attenuation factor: 500
- Frequency response: 20 - 20,000 Hz (+ 0 dB, -0.4 dB)
- Signal-to-noise ratio: 100 dB
- Stereo Channel Separation:
- Voltage Gain: 29.2 dB
- Output impedance 1 mOhm
Special Features
- Mos-FET, THX - certified
- Switching position: On, Off, Stand-By
- Construction: Input Buffer (Low-Noise differential amplifier which converts balanced-inputs to single-ended signals),
- Power Amplifier (Mos-Fet), dual-complemantary differential input stage
Power Supply, 300 W transformer, 2 x 10,000 µF
Remarks[edit]
- Other models of the same series:
- Rotel RMB-100
- Rotel RMB-1048
- Rotel RMB-1066
- Rotel RMB-1075
- Rotel RMB-1076
- Rotel RMB-1077
- Rotel RMB-1085
- Rotel RMB-1095
Pictures[edit]
- Extract from special print "Image Hifi 1/1996": Rotel RC-995, Rotel RMB-100
