Difference between revisions of "Kenwood KA-8150"
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KA-8150 |
− | * | + | * Type: Integrated amplifier |
− | * | + | * Years of manufacture: 1977 - 1979 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Bronze ("Gunmetal"), wooden cabinet optional |
− | * | + | * Power consumption: 600 W max. |
− | * | + | * Dimensions: 430 x 149 x 384 mm (WxHxD) |
− | * | + | * Weight: 16 kg |
− | * | + | * Original price approx.: 1298 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: 6 |
− | + | Phono 1: 2,5mV/50kOhm/ 85dB 250mV (RMS) max. | |
− | ** Phono 2: | + | ** Phono 2: 2,5mV/50kOhm/ 85dB |
− | + | Tuner: 150mV/50kOhm/110dB | |
− | + | Aux: 150mV/50kOhm/110dB | |
− | ** Tape A/B: | + | ** Tape A/B: 150mV/50kOhm/110dB |
− | * | + | * Number of outputs: 3 |
** Tape Rec.: 150mV/220Ohm | ** Tape Rec.: 150mV/220Ohm | ||
− | ** | + | ** Headphones: 6.3mm jack |
− | ** 2 | + | ** 2 speaker pairs |
− | ** Pre-Out: | + | ** Pre-Out: 1,0V/470Ohm |
− | ''' | + | '''Technical Data''' |
− | * | + | * Continuous power (at distortion factor) |
** 8 Ohm: 75W + 75W | ** 8 Ohm: 75W + 75W | ||
− | + | 4 Ohm: 90W + 90W | |
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: 330W | ** 4 Ohm: 330W | ||
− | * | + | * Total harmonic distortion: |
− | ** 0 | + | ** 0.03% at rated power into 8 ohms. |
− | + | 0.01% at 1W into 4 Ohm | |
− | * | + | * Attenuation factor: 50 at 8 Ohm |
− | * | + | * Frequency response: 5 - 50000 Hz |
− | ** Phono: | + | ** Phono: RIAA standard +/- 0.2dB |
− | ** Aux/Tape: | + | ** Aux/Tape: 7 - 50000 Hz +0dB / -1dB |
− | + | Signal to noise ratio: 115dB | |
− | * | + | * Tone control(switchable): |
− | ** Bass: | + | ** Bass: yes (150 or 400 Hz switchable) +/- 7.5dB. |
− | + | treble: yes (3 or 6 kHz switchable) +/- 7,5dB | |
− | + | Loudness: yes (6 levels) | |
− | + | 50Hz: +3dB/+6dB/+9dB | |
** 100Hz: +3dB/+6dB/+9dB | ** 100Hz: +3dB/+6dB/+9dB | ||
− | * High Filter: | + | * High Filter: yes - 8kHz/12dB / octave |
− | * Low Filter: | + | * Low Filter: yes - 40Hz/12dB / octave |
− | * Subsonic Filter: | + | * Subsonic Filter: yes - 18Hz/6dB / octave |
− | * Mute: | + | * Mute: no, but a gain control switch -10dB/ 0 / +10dB |
− | * Direct/Line-Straight: | + | * Direct/Line-Straight: yes - at the turnover switches of the tone controls |
− | ''' | + | '''Special Features''' |
− | * | + | * Pre- and power amplifier can be separated via jumper plugs on the rear panel |
− | * | + | * Double power supply, separate for both channels |
− | * | + | * Current limiting circuit to protect the power amplifier and the speakers in case of overload and short circuit |
− | * | + | * DC-coupled power amplifier |
− | * Rack | + | * Rack handles optional |
− | == | + | == Notes == |
− | * | + | * Other models in the same series: |
* [[Kenwood KA-3700]] | * [[Kenwood KA-3700]] | ||
* [[Kenwood KA-5700]] | * [[Kenwood KA-5700]] | ||
Line 83: | Line 83: | ||
− | * | + | * [[Kenwood KT-9900 Corresponding Tuner |
− | + | * [[Kenwood KT-9900]] | |
− | == | + | == Pictures == |
− | * | + | * Picture: Kenwood KA-8150 |
− | [[ | + | [[File:Kenwood KA-8150-1.jpg]] |
− | == | + | * Picture: Kenwood KA-8150 |
+ | [[File:Kenwood KA-8150-1977.jpg]] | ||
+ | |||
+ | |||
+ | == Reports == | ||
== Links == | == Links == | ||
− | * | + | * External Link: "The Vintage Knob" website: [http://www.thevintageknob.org/kenwood-KA-8100.html] |
− | [[ | + | [[Category:Integrated Amplifier]] |
Latest revision as of 09:04, 17 September 2020
Data[edit]
General
- Manufacturer: Kenwood
- Model: KA-8150
- Type: Integrated amplifier
- Years of manufacture: 1977 - 1979
- Made in: Japan
- Color: Bronze ("Gunmetal"), wooden cabinet optional
- Power consumption: 600 W max.
- Dimensions: 430 x 149 x 384 mm (WxHxD)
- Weight: 16 kg
- Original price approx.: 1298 DM
Connections
- Number of inputs: 6
Phono 1: 2,5mV/50kOhm/ 85dB 250mV (RMS) max.
- Phono 2: 2,5mV/50kOhm/ 85dB
Tuner: 150mV/50kOhm/110dB Aux: 150mV/50kOhm/110dB
- Tape A/B: 150mV/50kOhm/110dB
- Number of outputs: 3
- Tape Rec.: 150mV/220Ohm
- Headphones: 6.3mm jack
- 2 speaker pairs
- Pre-Out: 1,0V/470Ohm
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 75W + 75W
4 Ohm: 90W + 90W
- Dynamic power
- 8 Ohm:
- 4 Ohm: 330W
- Total harmonic distortion:
- 0.03% at rated power into 8 ohms.
0.01% at 1W into 4 Ohm
- Attenuation factor: 50 at 8 Ohm
- Frequency response: 5 - 50000 Hz
- Phono: RIAA standard +/- 0.2dB
- Aux/Tape: 7 - 50000 Hz +0dB / -1dB
Signal to noise ratio: 115dB
- Tone control(switchable):
- Bass: yes (150 or 400 Hz switchable) +/- 7.5dB.
treble: yes (3 or 6 kHz switchable) +/- 7,5dB Loudness: yes (6 levels) 50Hz: +3dB/+6dB/+9dB
- 100Hz: +3dB/+6dB/+9dB
- High Filter: yes - 8kHz/12dB / octave
- Low Filter: yes - 40Hz/12dB / octave
- Subsonic Filter: yes - 18Hz/6dB / octave
- Mute: no, but a gain control switch -10dB/ 0 / +10dB
- Direct/Line-Straight: yes - at the turnover switches of the tone controls
Special Features
- Pre- and power amplifier can be separated via jumper plugs on the rear panel
- Double power supply, separate for both channels
- Current limiting circuit to protect the power amplifier and the speakers in case of overload and short circuit
- DC-coupled power amplifier
- Rack handles optional
Notes[edit]
- Other models in the same series:
- Kenwood KA-3700
- Kenwood KA-5700
- Kenwood KA-6100
- Kenwood KA-6150
- Kenwood KA-7100
- Kenwood KA-7150
- Kenwood KA-8100
- Kenwood KA-8150
- Kenwood KA-9100
- Kenwood KA-9150
- Kenwood Model 500
- Kenwood Model 600
- Kenwood Model 650
- [[Kenwood KT-9900 Corresponding Tuner
- Kenwood KT-9900
Pictures[edit]
- Picture: Kenwood KA-8150
- Picture: Kenwood KA-8150
Reports[edit]
Links[edit]
- External Link: "The Vintage Knob" website: [1]