Difference between revisions of "Kenwood BASIC T 2"
(Die Seite wurde neu angelegt: „__NOTOC__ == Daten == {{Navigation}} '''Allgemein''' * Hersteller: Kenwood * Modell: Basic T2 * Baujahre: Mitte 80er * Hergestellt in: Japan * Farbe: Schwarz * Fe…“) |
|||
(16 intermediate revisions by 3 users not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: Basic T 2 |
− | * | + | * Type: Tuner |
− | * | + | * Years of manufacture: 1983 - 1990 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Black |
− | * | + | * Remote control: No |
− | * | + | * Power consumption: 19 W |
− | * | + | * Dimensions: 440 x 64 x 317 mm (WxHxD) |
− | * | + | * Weight: 3.8 kg |
+ | * Original price approx.: 798 DM | ||
− | ''' | + | '''Connections''' |
− | * | + | * Number of outputs: 1 |
− | + | Cinch | |
− | * | + | * Number of inputs: |
− | ** FM: 75Ohm | + | ** FM: 75Ohm antenna connector |
− | + | AM: 300Ohm antenna connection | |
− | ''' | + | '''Technical Data''' |
− | * | + | * Reception: (FM/MW) |
− | * | + | * Frequencies: |
− | ** | + | ** VHF: 87.5-108MHz |
− | + | MW: | |
− | * | + | * Frequency response: 20-15000Hz +/-0.5dB |
− | * | + | * Input sensitivity: |
− | ** FM: Mono: 0 | + | ** FM: Mono: 0.7µV Stereo: 28µV |
− | + | AM: 10µV | |
− | * | + | * Distortion Narrow (Mono/Stereo): |
− | ** 100Hz: 0 | + | ** 100Hz: 0.1%/0.04% |
** 1kHz: 0,12%/0,3% | ** 1kHz: 0,12%/0,3% | ||
− | + | 15kHz: 0,03%/1,0% | |
− | * | + | *Distortion Wide (Mono/Stereo): |
− | ** 100Hz: 0 | + | ** 100Hz: 0.009%/0.04% |
− | ** 1kHz: 0 | + | ** 1kHz: 0.006%/0.0095% |
− | ** 15kHz: 0 | + | ** 15kHz: 0.03%/0.3% |
− | + | Signal to Noise Ratio(Mono/Stereo): 80dB/72dB DIN | |
− | * | + | * Channel Separation(Wide/Narrow): |
** 250Hz: 55dB/43dB | ** 250Hz: 55dB/43dB | ||
− | + | 1kHz: 55dB/45dB | |
− | ** 6 | + | ** 6.3kHz: 48dB/40dB |
− | ** 12 | + | ** 12.5kHz: 40dB/32dB |
− | * | + | * Selectivity (Wide/Narrow): 45dB/90dB |
− | * | + | * Co-wave selection (Wide/Narrow): 1dB/4dB |
− | + | spurious selection: 70dB | |
− | * | + | * Image frequency attenuation: 82dB |
− | * | + | * IF attenuation: 110dB |
− | * AM | + | * AM suppression: 65dB |
− | * | + | * Output level(1kHz,100%): |
− | * FM: 600mV,1 | + | ** FM: 600mV,1.7kOhm |
− | + | AM: 180mV,1,7kOhm | |
− | * RDS: | + | * RDS: No |
− | * | + | * Station memory: 8 stations |
− | ''' | + | '''Special Features''' |
− | * | + | * DLLD: Direct Linear Loop Detector |
− | * IF | + | * IF band controller for AM (Wide/Narrow) |
− | == | + | == Remarks == |
− | + | * Other models in the same series: | |
+ | * [[Kenwood BASIC T 1]] | ||
+ | * [[Kenwood BASIC T 2]] | ||
− | |||
− | == | + | * Corresponding Kenwood preamplifiers: |
+ | * [[Kenwood Basic C 1]] | ||
+ | * [[Kenwood Basic C 2]] | ||
+ | |||
+ | |||
+ | * [[Corresponding Kenwood power amplifiers: | ||
+ | * [[Kenwood Basic M 1]] | ||
+ | * [[Kenwood Basic M 1 A]] | ||
+ | * [[Kenwood Basic M 2]] | ||
+ | * [[Kenwood Basic M 2 A]] | ||
+ | |||
+ | |||
+ | * [[Corresponding Kenwood Tape Deck: | ||
+ | * [[Kenwood BASIC X 1]] | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | * Image: Kenwood BASIC T 2 | ||
+ | [[Image:Basict2.jpg]] | ||
+ | |||
+ | |||
+ | == Reports == | ||
+ | |||
== Links == | == Links == | ||
− | [[ | + | |
+ | [[Category:Tuner]] |
Latest revision as of 01:09, 20 June 2020
Data[edit]
General
- Manufacturer: Kenwood
- Model: Basic T 2
- Type: Tuner
- Years of manufacture: 1983 - 1990
- Made in: Japan
- Color: Black
- Remote control: No
- Power consumption: 19 W
- Dimensions: 440 x 64 x 317 mm (WxHxD)
- Weight: 3.8 kg
- Original price approx.: 798 DM
Connections
- Number of outputs: 1
Cinch
- Number of inputs:
- FM: 75Ohm antenna connector
AM: 300Ohm antenna connection
Technical Data
- Reception: (FM/MW)
- Frequencies:
- VHF: 87.5-108MHz
MW:
- Frequency response: 20-15000Hz +/-0.5dB
- Input sensitivity:
- FM: Mono: 0.7µV Stereo: 28µV
AM: 10µV
- Distortion Narrow (Mono/Stereo):
- 100Hz: 0.1%/0.04%
- 1kHz: 0,12%/0,3%
15kHz: 0,03%/1,0%
- Distortion Wide (Mono/Stereo):
- 100Hz: 0.009%/0.04%
- 1kHz: 0.006%/0.0095%
- 15kHz: 0.03%/0.3%
Signal to Noise Ratio(Mono/Stereo): 80dB/72dB DIN
- Channel Separation(Wide/Narrow):
- 250Hz: 55dB/43dB
1kHz: 55dB/45dB
- 6.3kHz: 48dB/40dB
- 12.5kHz: 40dB/32dB
- Selectivity (Wide/Narrow): 45dB/90dB
- Co-wave selection (Wide/Narrow): 1dB/4dB
spurious selection: 70dB
- Image frequency attenuation: 82dB
- IF attenuation: 110dB
- AM suppression: 65dB
- Output level(1kHz,100%):
- FM: 600mV,1.7kOhm
AM: 180mV,1,7kOhm
- RDS: No
- Station memory: 8 stations
Special Features
- DLLD: Direct Linear Loop Detector
- IF band controller for AM (Wide/Narrow)
Remarks[edit]
- Other models in the same series:
- Kenwood BASIC T 1
- Kenwood BASIC T 2
- Corresponding Kenwood preamplifiers:
- Kenwood Basic C 1
- Kenwood Basic C 2
- [[Corresponding Kenwood power amplifiers:
- Kenwood Basic M 1
- Kenwood Basic M 1 A
- Kenwood Basic M 2
- Kenwood Basic M 2 A
- [[Corresponding Kenwood Tape Deck:
- Kenwood BASIC X 1
Pictures[edit]
- Image: Kenwood BASIC T 2