Difference between revisions of "Pioneer A-77X"

(Bemerkungen)
 
(27 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
== Daten ==
+
== Data ==
{{Navigation}}
+
{{navigation}}
'''Allgemein'''
+
'''General'''
* Hersteller: [[Pioneer]]
+
* Manufacturer: [[Pioneer]]
* Modell: A-77X
+
* Model: A-77 X
* Baujahre: um 1985
+
* Type: Integrated amplifier
* Typ: Vollverstärker
+
* Years of manufacture: 1985 - 1986
* Fernbedienung: nein
+
* Color: Silver or black
* Leistungsaufnahme: 780 Watt
+
* Remote control: no
* Abmessungen: 420 x 154 x 427 mm (BxHxT)
+
* Power consumption: 780 W max.
* Gewicht: ca. 13,8kg
+
* Dimensions: 420 x 155 x 427 mm (WxHxD), width with wooden side panels 457 mm
* Farbe: silber, schwarz
+
* Weight: 15,3 kg
* Neupreis ca.: 1000 DM  
+
* Original price approx.: 1'000 DM
  
  
'''Anschlüsse'''
+
'''Connections'''
* Anzahl der Eingänge: 7, Cinch
+
* Number of inputs: 7, Cinch
** Phono (MM/MC umschaltbar)
+
** Phono (MM/MC switchable)
** CD
+
CD
 
** Tuner
 
** Tuner
 
** AUX 1
 
** AUX 1
Line 24: Line 24:
 
** Tape 1
 
** Tape 1
 
** Tape 2
 
** Tape 2
 
+
* Number of outputs: 2, Cinch
* Anzahl der Ausgänge: 2, Cinch
 
 
** Tape Rec 1
 
** Tape Rec 1
 
** Tape Rec 2
 
** Tape Rec 2
  
  
'''Technische Daten'''
+
'''Technical Data'''
* Dauerleistung an 8/4Ohm bei Klirrfaktor
+
* Continuous power: 2x 100 watts into 8 ohms, 20-20 kHz
** 8 Ohm: 110W (DIN, 1 kHz), 1% Klirr
+
* Distortion factor: 0.003 %
** 8 Ohm: 100W (RMS), 0,003% Klirr
+
* Dynamic power:
* Dynamikleistung
+
** 8 Ohm: 137 W
** 8 Ohm: 137W
+
4 Ohm: 225 W
** 4 Ohm: 225W
+
2 Ohm: 295 W
** 2 Ohm: 295W
+
* Total harmonic distortion: 0.003%
* Gesamtklirrfaktor: 0,003%
+
* Cross distortion: 50 Hz:7 kHz at 4:1, at active power 0.003%
* Kreuzklirrfaktor: 50Hz:7kHz bei 4:1, bei Wirkleistung 0,003%
+
* Power bandwidth: 10- 100 kHz (line), 20- 20 kHz (phono)
* Leistungsbandbreite: 5-55kHz
+
* Attenuation factor: 100 (20-20 kHz, 8 ohms)  
* Dämpfungsfaktor: (1kHz/20-20kHz, 8Ohm) 50/10
+
* Input (Sensitivity/Impedance)
* Eingang (Empfindlichkeit/Impedanz)
+
** Phono MM 2.5 mV/ 50 kOhm, MC 0.2 mV/ 100 Ohm
** Phono MM 2,5mV/50kOhm, MC 0,2mV/100Ohm
+
Line 150 mV/ 30 kOhm
** Line 150mV/30kOhm
+
* Output (level/impedance): 150 mV/ 2.2 kOhm
* Ausgang (Pegel/Impedanz): 150mV/2,2kOhm
+
* Frequency response:
* Frequenzgang:
+
** Phono: 20-20 kHz ±0.2 dB
** Phono: 20-20kHz ±0,2dB
+
Line: 10-100 kHz +0, -3 dB
** Line: 10-100kHz +0, -3dB
+
* Tone control
* Klangregelung
+
Bass: ±8 dB (at 100 Hz)
**Bass: ±8dB (bei 100Hz)
+
Treble: ±8 dB (at 10 kHz)
**Höhen: ±8dB (bei 10kHz)
+
* Loudness: no
* Loudness: nein
+
* Subsonic: yes (15 Hz, -6 dB/ octave)
* Subsonic: ja (15Hz, -6dB/Oktave)
+
* Mute: yes, -20 dB
* Mute: ja, -20dB
+
* Direct/Line-Straight: yes
* Direct/Line-Straight: ja
+
* External voltage spacing (short-circuited)
* Brummspannungsabstand (kurzgeschlossen)
+
** Phono MM/MC - 88/ 70 dB
** Phono MM/MC - 80/59dB
+
Line - 108 dB
** Line - 108dB
+
* Stereo channel separation (1 kHz)
* Stereokanaltrennung (1kHz)
+
** Phono MM/MC - 70/62 dB
** Phono MM/MC - 70/62dB
+
CD/Tuner, AUX 1,2, Tape Play 1,2 - 88/85 dB
** CD/Tuner, AUX 1,2, Tape Play 1,2 - 88/85dB
+
* Loudspeaker impedance: 6- 16 Ohm
 +
 
 +
 
 +
'''Special Features'''
 +
* Separate power supplies for one power amplifier and the preamplifier each, double mono setup.
 +
* Separate loudspeaker relays for each channel, electronically switched
 +
 
 +
 
 +
== Remarks ==
 +
* Previous model:
 +
* [[Pioneer A-70]]
 +
 
 +
 
 +
* Successor model:
 +
* [[Pioneer A-717]]
 +
 
 +
 
 +
'''Other models in the same series'''
 +
* [[Pioneer A-22]]
 +
* [[Pioneer A-33]]
 +
* [[Pioneer A-44]]
 +
* [[Pioneer A-66X]]
 +
* [[Pioneer A-77X]]
 +
* [[Pioneer A-88X]]
 +
 
 +
 
 +
* [[Tuner:
 +
* [[Pioneer F-99 X]]
 +
 
 +
 
 +
* CD player:
 +
* [[Pioneer PD-9010 X]]
 +
 
 +
 
 +
* Tape Deck:
 +
* [[Pioneer CT-A 7 X]]
 +
* [[Pioneer CT-A 9 X]]
  
  
'''Besondere Ausstattungen'''
+
* Turntable:
* getrennte Netzteile für je eine Endstufe und die Vorstufe, Doppel Mono-Aufbau
+
* [[Pioneer PL-90]]
* für jeden Kanal getrennte Lautsprecher Relais, die elektronisch geschaltet werden
 
  
== Bemerkungen ==
 
Vorgängermodell:
 
* [[Pioneer A-70]]
 
  
Nachfolgemodell:
+
* Speakers:
* [[Pioneer A-717]]  
+
* [[Pioneer DSS-E 6]]
 +
* [[Pioneer DSS-E 10]]
  
'''Weitere Modelle der gleichen Serie'''
 
*[[Pioneer A-33]]
 
*[[Pioneer A-44]]
 
*[[Pioneer A-66X]]
 
*[[Pioneer A-77X]]
 
*[[Pioneer A-88X]]
 
  
Die Modelle A-77X und A-88X waren die damaligen Elite-Verstärker der Pioneer-Serie, wobei der A-88X die Serie sowohl ausstattungstechnisch als auch leistungsmäßig angeführt hat. Die Geräte sind wohl aus den Vorgängern A-60 bis A-80 entstanden, die recht ähnliche Daten aufweisen.
+
== Pictures ==
Alle Modelle (ab dem A-66X) verfügen "natürlich" über Metallfronten und Regler aus Metall. Der Lautstärkeregler des A-88X und A-77X ist komplett aus Metall und wird mit einer Madenschraube an der Potiachse befestigt. (Bei späteren A-77X ist der Knopf allerdings nur auf die Riffelachse des Potis gesteckt.)
+
* Image: Pioneer A-77 X
 +
[[File:A77xa.jpg]]
  
Reparaturhinweis:
 
Wenn die roten Leuchtdioden nicht mehr und die grünen nur noch schwach leuchten, dann ist wahrscheinlich die Power-Glühlampe in dem grünen Gummi über dem Hauptschalter durchgebrannt (12V , 0,1A). Sie liegt als "Vorwiderstand" vor dem Längstregler, der die übrigen Anzeigen mit Spannung versorgt.
 
  
== Bilder ==
+
<gallery>
http://img508.imageshack.us/img508/5658/frontansicht22qb.jpg
+
File:A77x 1.jpg|1
 +
File:A77x 2.jpg|2
 +
File:A77x 3.jpg|3
 +
File:A77x 4.jpg|The interior view with a very strong resemblance to that of the A-88X
 +
File:A77x 5.jpg|On the right you can see the shielded phono board
 +
File:A77x 6.jpg|6
 +
File:A77x 7.jpg|The front without front panel with the controls
 +
</gallery>
  
http://saved.im/mtuwmzywb3hw/img_0317q.jpg
 
  
http://saved.im/mtuwmzywahu3/img_0313q.jpg
+
* Excerpt from brochure: Pioneer A-77 X
 +
[[File:1985 Pioneer Elite Katalog-5.jpg]]
  
Die Innenansicht mit sehr starker Ähnlichkeit zu der des A-88X:
 
  
http://img508.imageshack.us/img508/5940/innenansicht3ho.jpg
+
== Reports ==
 +
* Report in "FonoForum" 3 / 1986
  
Rechts sieht man die abgeschirmte Phonoplatine.
 
  
http://saved.im/mtuwmzywegxo/img_0248q.jpg
+
* The models A-77X and A-88X were the elite amplifiers of the Pioneer series at that time, with the A-88X leading the series both in terms of equipment and performance.
 +
* The units probably evolved from their predecessors, the A-60 through A-80, which had fairly similar specs.
 +
* All models (starting with the A-66X) "naturally" have metal fronts and knobs.
 +
* The volume knob of the A-88X and A-77X is completely made of metal and is fixed to the potentiometer axis with a grub screw (on later A-77X, however, the knob is just plugged onto the corrugated axis of the potentiometer).
  
http://saved.im/mtuwmzywotvw/img_0250q.jpg
 
  
Die Front ohne Frontblende mit den Bedienelementen:
+
'''Repair Note:'''
 +
* If the red LEDs are no longer lit and the green ones are only dimly lit, then the power bulb in the green rubber above the main switch has probably burned out (12V , 0.1A).
 +
It is located as a "series resistor" in front of the series regulator, which supplies the other displays with voltage.
  
http://img508.imageshack.us/img508/6773/bedienpanel4rl.jpg
 
  
== Berichte ==
+
== Left ==
  
== Links ==
 
  
[[Kategorie:Vollverstärker]]
+
[[Category:Integrated amplifier]]

Latest revision as of 15:00, 5 June 2020

Data[edit]

General

  • Manufacturer: Pioneer
  • Model: A-77 X
  • Type: Integrated amplifier
  • Years of manufacture: 1985 - 1986
  • Color: Silver or black
  • Remote control: no
  • Power consumption: 780 W max.
  • Dimensions: 420 x 155 x 427 mm (WxHxD), width with wooden side panels 457 mm
  • Weight: 15,3 kg
  • Original price approx.: 1'000 DM


Connections

  • Number of inputs: 7, Cinch
    • Phono (MM/MC switchable)

CD

    • Tuner
    • AUX 1
    • AUX 2
    • Tape 1
    • Tape 2
  • Number of outputs: 2, Cinch
    • Tape Rec 1
    • Tape Rec 2


Technical Data

  • Continuous power: 2x 100 watts into 8 ohms, 20-20 kHz
  • Distortion factor: 0.003 %
  • Dynamic power:
    • 8 Ohm: 137 W

4 Ohm: 225 W 2 Ohm: 295 W

  • Total harmonic distortion: 0.003%
  • Cross distortion: 50 Hz:7 kHz at 4:1, at active power 0.003%
  • Power bandwidth: 10- 100 kHz (line), 20- 20 kHz (phono)
  • Attenuation factor: 100 (20-20 kHz, 8 ohms)
  • Input (Sensitivity/Impedance)
    • Phono MM 2.5 mV/ 50 kOhm, MC 0.2 mV/ 100 Ohm

Line 150 mV/ 30 kOhm

  • Output (level/impedance): 150 mV/ 2.2 kOhm
  • Frequency response:
    • Phono: 20-20 kHz ±0.2 dB

Line: 10-100 kHz +0, -3 dB

  • Tone control

Bass: ±8 dB (at 100 Hz) Treble: ±8 dB (at 10 kHz)

  • Loudness: no
  • Subsonic: yes (15 Hz, -6 dB/ octave)
  • Mute: yes, -20 dB
  • Direct/Line-Straight: yes
  • External voltage spacing (short-circuited)
    • Phono MM/MC - 88/ 70 dB

Line - 108 dB

  • Stereo channel separation (1 kHz)
    • Phono MM/MC - 70/62 dB

CD/Tuner, AUX 1,2, Tape Play 1,2 - 88/85 dB

  • Loudspeaker impedance: 6- 16 Ohm


Special Features

  • Separate power supplies for one power amplifier and the preamplifier each, double mono setup.
  • Separate loudspeaker relays for each channel, electronically switched


Remarks[edit]



Other models in the same series







Pictures[edit]

  • Image: Pioneer A-77 X

A77xa.jpg



  • Excerpt from brochure: Pioneer A-77 X

1985 Pioneer Elite Katalog-5.jpg


Reports[edit]

  • Report in "FonoForum" 3 / 1986


  • The models A-77X and A-88X were the elite amplifiers of the Pioneer series at that time, with the A-88X leading the series both in terms of equipment and performance.
  • The units probably evolved from their predecessors, the A-60 through A-80, which had fairly similar specs.
  • All models (starting with the A-66X) "naturally" have metal fronts and knobs.
  • The volume knob of the A-88X and A-77X is completely made of metal and is fixed to the potentiometer axis with a grub screw (on later A-77X, however, the knob is just plugged onto the corrugated axis of the potentiometer).


Repair Note:

  • If the red LEDs are no longer lit and the green ones are only dimly lit, then the power bulb in the green rubber above the main switch has probably burned out (12V , 0.1A).

It is located as a "series resistor" in front of the series regulator, which supplies the other displays with voltage.


Left[edit]