Difference between revisions of "Ortofon MC Tango"
Analoghatwas (talk | contribs) (→Bemerkungen: Gefüllt.) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Ortofon]] |
| − | * | + | * Model: MC Tango |
| − | * | + | * Years of manufacture: from 2004 - ? |
| − | * | + | * Made in: Denmark |
| − | * | + | * Color: blue, transparent |
| − | * | + | * Weight: 4,1 g |
| − | * | + | * Original price: |
| − | ''' | + | '''Technical Specifications''' |
| − | * | + | * Principle: Moving Coil (MC) |
| − | * | + | * Frequency response: 20 - 25,000 Hz |
| − | * | + | * Channel separation: > 23 dB at 1 kHz |
| − | * | + | * Channel balance: 0 < 1,5 dB bei 1 kHz |
* Übersprechdämpfung: | * Übersprechdämpfung: | ||
| − | * Ausgangsspannung: > | + | * Ausgangsspannung: >.5 mV |
| − | * | + | * Terminating resistor: > 20 Ohm |
| − | * | + | * Internal resistance (DC): 10 Ohm |
| − | * | + | * Needle type: elliptical (r/R: 8/18 µm), on aluminium needle carrier |
| − | * | + | * Recommended contact force: 25 mN |
| − | * | + | * Needle compliance: 12 µm/mN |
| − | * | + | * Scanning capability at 315 Hz: 70 µm |
| − | == | + | == Remarks == |
| + | Other models in the series: | ||
| + | * [[Ortofon MC Salsa|MC Salsa]] | ||
| + | * [[Ortofon MC Samba|MC Samba]] | ||
| − | == | + | == Pictures == |
| − | == | + | == Reports == |
== Links == | == Links == | ||
| − | [[ | + | |
| + | [[Category:Pickups]]</1,5> | ||
Latest revision as of 15:28, 8 May 2020
Data[edit]
General
- Manufacturer: Ortofon
- Model: MC Tango
- Years of manufacture: from 2004 - ?
- Made in: Denmark
- Color: blue, transparent
- Weight: 4,1 g
- Original price:
Technical Specifications
- Principle: Moving Coil (MC)
- Frequency response: 20 - 25,000 Hz
- Channel separation: > 23 dB at 1 kHz
- Channel balance: 0 < 1,5 dB bei 1 kHz
- Übersprechdämpfung:
- Ausgangsspannung: >.5 mV
- Terminating resistor: > 20 Ohm
- Internal resistance (DC): 10 Ohm
- Needle type: elliptical (r/R: 8/18 µm), on aluminium needle carrier
- Recommended contact force: 25 mN
- Needle compliance: 12 µm/mN
- Scanning capability at 315 Hz: 70 µm
Remarks[edit]
Other models in the series:
Pictures[edit]
Reports[edit]
Links[edit]
</1,5>