Difference between revisions of "SABA 9260"
m (→‎Bilder)
 
(13 intermediate revisions by 10 users not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
−
== Daten ==
+
== Data ==
−
{{Navigation}}
+
{{navigation}}
−
'''Allgemein'''
+
'''General'''
−
* Hersteller: Saba
+
* Manufacturer: [[SABA]]
−
* Modell: Saba Ultra Hifi professional Receiver 9260  
+
* Model: Saba Ultra Hifi professional quartz reference Receiver 9260
−
* Baujahre: 1980
+
* Type: Receiver
−
* Hergestellt in: made in Germany
+
* Years of manufacture: 1980 - 1982
−
* Farbe: anthrazit/sibermetallic oder anthrazit/mattschwarz
+
* Made in: Germany
−
* Fernbedienung: -
+
* Color: Anthracite/Silvermetallic or Anthracite/Matt Black
−
* Leistungsaufnahme: min. 60 W bis max 350 Watt
+
* Remote control: -
−
* Abmessungen: 54cm x 13,5cm x 33,5cm (BxHxT)
+
* Power consumption: min. 60 W, 350 Watt (max)
−
* Gewicht: 14,2 kg
+
* Dimensions: 540 x 135 x 335 mm (WxHxD)
−
* Neupreis ca.:
+
* Weight: 14.2 kg
 +
* Original price approx.: 1'500 DM
  
  
−
'''Anschlüsse'''
+
'''Connections'''
−
* Anzahl der Eingänge: 5
+
* Number of inputs: 5
 
** Monitor, Tape1, Tape2, Magn.Phono, AUX
 
** Monitor, Tape1, Tape2, Magn.Phono, AUX
−
* Anzahl der Ausgänge:
+
* Number of outputs:
 
** Tape1/2
 
** Tape1/2
  
  
−
'''Technische Daten'''
+
'''Technical Data'''
  
−
''Verstärker''
+
'''Amplifier'''
−
* Dauerleistung (bei Klirrfaktor)
+
* Continuous power (at distortion)
−
** 8 Ohm: 2 x 57 W Sinusleistung
+
8 Ohm: 2 x 57 W sinus power
−
** 4 Ohm: 2 x 80 W Sinusleistung
+
** 4 Ohm: 2 x 80 W sinus power
−
* Dynamikleistung
+
* Dynamic power
−
** 8 Ohm: 2 x 78 Musikleistung
+
** 8 Ohm: 2 x 78 music power
−
** 4 Ohm: 2 x 120 W Musikleistung
+
** 4 Ohm: 2 x 120 W music power
−
* Gesamtklirrfaktor: 0,03% (bei Nennleistung, 1kHz)
+
* Total harmonic distortion: 0.03% (at rated power, 1kHz)
−
* Dämpfungsfaktor: (40...12500) 30 für 4Ohm und 60 für 8Ohm
+
* Attenuation factor: (40...12500) 30 for 4Ohm and 60 for 8Ohm
−
* Frequenzgang: 10...80000Hz (-3 dB 1%klirr) / 15...50000Hz (+/-1,5dB)
+
* Frequency response:
−
* Signalrauschabstand: 81 dB bei Nennleistung
+
** 10 - 80,000 Hz (-3 dB, 1%).
−
* Stereokanaltrennung: 60 dB  
+
** 15 - 50,000 Hz (±1.5 dB)  
−
* Klangregelung:
+
* Signal-to-noise ratio: 81 dB at rated power
−
** Bass: 60 Hz +/- 15 dB
+
* Stereo channel separation: 60 dB  
−
** Höhen: 15000Hz +/- 15 dB
+
* Tone control:
−
* Loudness: 60 Hz +13dB, 15000 +6dB
+
** Bass: ±15 dB (60 Hz).
−
* High Filter: -3dB /8000Hz / 12dB/Okt
+
** Treble: ±15 dB (15 kHz)
 +
* Loudness: +13/6 dB (60 Hz/15 kHz)
 +
* High Filter: -3dB /8000Hz / 12dB/Oct
 
* Low Filter (Subsonic): -3dB / 60 Hz / 12dB/Okt
 
* Low Filter (Subsonic): -3dB / 60 Hz / 12dB/Okt
−
* Mute: muting für UKW-Empfang
+
* Mute: muting for FM reception
 
* Direct/Line-Straight: -  
 
* Direct/Line-Straight: -  
  
  
 
''Tuner''
 
''Tuner''
−
* Empfang: UKW/MW
+
* Reception: VHF/MW
−
* Frequenzen:
+
* Frequencies:
−
** UKW: 87,5 - 108
+
** FM: 87.5 - 108 MHz
−
** MW: 520 - 1630
+
** MW: 520 - 1630 kHz
−
* Frequenzgang: 50...16000Hz
+
* Frequency response: 50 - 16,000 Hz
−
* Eingangsmpfindlichkeit: FM, Mono: 0,55 MikroVolt für 26dB Rauschabstand, Stereo FM: 8 Mikrovolt für 46 dB Rauschabstend MW: 4 µV
+
* Input sensitivity:  
−
* Stereoschwelle: 5 mikroVolt
+
** FM, Mono: 0.55 µV for 26dB S/N ratio.
−
* Mutingschwelle: 3 µV  
+
** Stereo FM: 8 µV for 46 dB noise floor
−
* Klirrfaktor: FM-mono und FM stereo: 0,2%  
+
** MW: 4 µV
−
* Signalrauschabstand: FM-mono: 68 dB, stereo: 64dB
+
* Stereo threshold: 5 µV
−
* Kanaltrennung: 40 dB
+
* Muting threshold: 3 µV  
−
* Trennschärfe: FM 80 dB, AM: 54 dB
+
* Distortion factor: FM mono and FM stereo: 0.2%  
−
* Gleichwellenselektion: 1,0 dB bei 1 mV
+
* Signal-to-noise ratio: FM mono: 68 dB, stereo: 64dB
−
* Nebenwellenselektion:  
+
* Channel separation: 40 dB
−
* Spiegelfrequenzdämpfung:  
+
* selectivity: FM 80 dB, AM: 54 dB
−
* ZF-Dämpfung:
+
* Co-wave selection: 1.0 dB at 1 mV
−
* AM-Unterdrückung:
+
* Spurious wave selection:  
−
* Ausgangspegel:  
+
* IF attenuation:  
−
* RDS: nein
+
* IF attenuation:
−
* Stationsspeicher: 10
+
* AM suppression:
 +
* Output level:  
 +
* RDS: no
 +
* Station memory: 10
  
  
−
'''Besondere Ausstattungen'''
+
== Comments ==
−
* Präsenz-Taste: +6dB / 3000Hz
+
* Other models in the same series:
−
* Pegelschalter
+
* Receiver:
−
* Rotor-Antennenanschluss mit Steuerung durch 7 Stationstasten
+
* [[SABA RS 910]]
−
* Tape1/2 Kopierschaltungen
+
* [[SABA RS 930]]
 +
* [[SABA 9140]]
 +
* [[SABA 9141 telecommander]]
 +
* [[SABA 9250]]
 +
* [[SABA 9260]]
  
  
−
== Bemerkungen ==
+
* [[tape deck]]
−
Weitere Modelle der gleichen Serie: 9240,9241
+
* [[Saba CD 270]]
 +
* [[Saba CD 274]]
  
−
== Bilder ==
 
−
[[bild:Saba9260_1.jpg]][[bild:Saba9260_2.jpg]][[bild:Saba9260_3.jpg]][[bild:Saba9260_4.jpg]][[bild:Saba9260_5.jpg]]
 
  
−
== Berichte ==
+
* Record Player:
 +
* [[Saba PSP 240]]
 +
* [[Saba PSP 244]]
 +
 
 +
 
 +
* Speakers:
 +
* [[Saba AM 80]]
 +
* [[Saba AM 130]]
 +
* [[Saba AM 140]]
 +
 
 +
 
 +
== Pictures ==
 +
<gallery>
 +
 
 +
Saba9260_1.jpg|SABA 9260 Silver Face, anodized
 +
SABA 9260 stitch.jpg|SABA 9260 Black Face, anodized
 +
Saba9260_2.jpg|SABA 9260
 +
Saba9260_3.jpg|SABA 9260
 +
Saba9260_4.jpg|SABA 9260
 +
Saba9260_5.jpg|SABA 9260
 +
Saba9260_3.jpg|SABA 9260
 +
 
 +
</gallery>
 +
 
 +
'''Special Features'''
 +
* Presence button: +6dB / 3000Hz
 +
* Level switch
 +
* Rotor antenna connection with control by 7 station buttons
 +
* Tape1/2 copy circuits
 +
 
 +
== Remarks ==
 +
* Other models in the same series:
 +
* [[SABA 9240]]
 +
* [[SABA 9241]]
 +
* [[SABA 9250]]
 +
* [[SABA 9260]]
 +
 
 +
 
 +
Hello, I bought the SABA 9260 in 1980. The list price should be 1500 DM, at that time you got a whole HiFi tower with junk equipment at Quelle for 700 DM, I paid 950 DM for the SABA receiver at that time. That was a lot of money for me. The receiver still runs today, unfortunately only the display of the tuner is kapput.
 +
* Small tip: the tuner display can be repaired with false indications or failure also by the simple exchange of a 800 mA fuse. I bought a 9260 at e... I bought a 9260 that had this.
 +
* Hello, a little addendum:
 +
* If the display shows faulty data, simply replacing the fuse is not decisive. The whole display unit must be removed and disassembled. The electronics have two circuit boards. These are connected by several solid metal pins. Remove them by simply pulling them out...clean them...also the inner contacts, reassemble them...and everything runs like new in 99% of all cases!!!!
 +
* Display error can also be because of the power supply board and the 4066 MOS switching IS error, just cured 2 Saba 9260.
 +
 
 +
 
 +
== Reports ==
 +
 
  
 
== Links ==
 
== Links ==
  
−
[[Kategorie:Receiver]]
+
 
 +
[[Category:Receiver]]

Latest revision as of 04:43, 20 April 2020

Data[edit]

General

  • Manufacturer: SABA
  • Model: Saba Ultra Hifi professional quartz reference Receiver 9260
  • Type: Receiver
  • Years of manufacture: 1980 - 1982
  • Made in: Germany
  • Color: Anthracite/Silvermetallic or Anthracite/Matt Black
  • Remote control: -
  • Power consumption: min. 60 W, 350 Watt (max)
  • Dimensions: 540 x 135 x 335 mm (WxHxD)
  • Weight: 14.2 kg
  • Original price approx.: 1'500 DM


Connections

  • Number of inputs: 5
    • Monitor, Tape1, Tape2, Magn.Phono, AUX
  • Number of outputs:
    • Tape1/2


Technical Data

Amplifier

  • Continuous power (at distortion)

8 Ohm: 2 x 57 W sinus power

    • 4 Ohm: 2 x 80 W sinus power
  • Dynamic power
    • 8 Ohm: 2 x 78 music power
    • 4 Ohm: 2 x 120 W music power
  • Total harmonic distortion: 0.03% (at rated power, 1kHz)
  • Attenuation factor: (40...12500) 30 for 4Ohm and 60 for 8Ohm
  • Frequency response:
    • 10 - 80,000 Hz (-3 dB, 1%).
    • 15 - 50,000 Hz (±1.5 dB)
  • Signal-to-noise ratio: 81 dB at rated power
  • Stereo channel separation: 60 dB
  • Tone control:
    • Bass: ±15 dB (60 Hz).
    • Treble: ±15 dB (15 kHz)
  • Loudness: +13/6 dB (60 Hz/15 kHz)
  • High Filter: -3dB /8000Hz / 12dB/Oct
  • Low Filter (Subsonic): -3dB / 60 Hz / 12dB/Okt
  • Mute: muting for FM reception
  • Direct/Line-Straight: -


Tuner

  • Reception: VHF/MW
  • Frequencies:
    • FM: 87.5 - 108 MHz
    • MW: 520 - 1630 kHz
  • Frequency response: 50 - 16,000 Hz
  • Input sensitivity:
    • FM, Mono: 0.55 µV for 26dB S/N ratio.
    • Stereo FM: 8 µV for 46 dB noise floor
    • MW: 4 µV
  • Stereo threshold: 5 µV
  • Muting threshold: 3 µV
  • Distortion factor: FM mono and FM stereo: 0.2%
  • Signal-to-noise ratio: FM mono: 68 dB, stereo: 64dB
  • Channel separation: 40 dB
  • selectivity: FM 80 dB, AM: 54 dB
  • Co-wave selection: 1.0 dB at 1 mV
  • Spurious wave selection:
  • IF attenuation:
  • IF attenuation:
  • AM suppression:
  • Output level:
  • RDS: no
  • Station memory: 10


Comments[edit]





Pictures[edit]

  • SABA 9260 Silver Face, anodized

  • SABA 9260 Black Face, anodized

  • SABA 9260

  • SABA 9260

  • SABA 9260

  • SABA 9260

  • SABA 9260

Special Features

  • Presence button: +6dB / 3000Hz
  • Level switch
  • Rotor antenna connection with control by 7 station buttons
  • Tape1/2 copy circuits

Remarks[edit]


Hello, I bought the SABA 9260 in 1980. The list price should be 1500 DM, at that time you got a whole HiFi tower with junk equipment at Quelle for 700 DM, I paid 950 DM for the SABA receiver at that time. That was a lot of money for me. The receiver still runs today, unfortunately only the display of the tuner is kapput.

  • Small tip: the tuner display can be repaired with false indications or failure also by the simple exchange of a 800 mA fuse. I bought a 9260 at e... I bought a 9260 that had this.
  • Hello, a little addendum:
  • If the display shows faulty data, simply replacing the fuse is not decisive. The whole display unit must be removed and disassembled. The electronics have two circuit boards. These are connected by several solid metal pins. Remove them by simply pulling them out...clean them...also the inner contacts, reassemble them...and everything runs like new in 99% of all cases!!!!
  • Display error can also be because of the power supply board and the 4066 MOS switching IS error, just cured 2 Saba 9260.


Reports[edit]

Links[edit]

Retrieved from "https://hifi-wiki.com/index.php?title=SABA_9260&oldid=231148"