Difference between revisions of "Kenwood Basic M 2"
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Kenwood]] |
| − | * | + | * Model: Basic M 2 |
| − | * | + | * Type: Stereo power amplifier |
| − | * | + | * Years of manufacture: 1983 - 1987 |
| − | * | + | * Manufactured in: |
| − | * | + | * Color: Black |
| − | * | + | * Remote control: no |
| − | * | + | * Power consumption: 500 W |
| − | * | + | * Dimensions: 440 x 158 x 373 mm |
| − | * | + | * Weight: 15.5 kg |
| − | * | + | * Original price approx.: 1'200 DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
** 1 x Line In: 1 V / 47 kOhm | ** 1 x Line In: 1 V / 47 kOhm | ||
| − | * | + | * Number of outputs: |
| − | ** 2 x | + | ** 2 x loudspeaker |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Rated power |
| − | ** 8 Ohm: 2x 220 W RMS (20Hz - 20kHz, | + | ** 8 Ohm: 2x 220 W RMS (20Hz - 20kHz, at 0.004% THD) |
| − | * | + | * Continuous power (at THD) |
| − | ** 8 Ohm: 2x 230 W ( | + | ** 8 Ohm: 2x 230 W (at 0.7% THD, 63Hz - 12.5kHz, according to IEC/NF standard; at 1% THD, 1kHz, according to DIN standard) |
| − | + | 4 Ohm: 2x 250 W (at 1% THD, 1kHz, according to DIN standard) | |
| − | * | + | * Dynamic power |
** 8 Ohm: 2x 346 W | ** 8 Ohm: 2x 346 W | ||
| − | + | 4 Ohm: 2x 526 W | |
| − | + | Total harmonic distortion: | |
| − | ** 0 | + | ** 0.004% at nominal power (20Hz - 20kHz, 8 Ohm). |
| − | ** 0 | + | ** 0.001% at nominal power (1kHz, 8 Ohm) |
| − | * | + | * Intermodulation distortion |
| − | ** 0.004% | + | ** 0.004% at nominal power (60Hz:7kHz = 4:1, 8 Ohm) |
| − | * | + | * Attenuation factor: 1.000 (50Hz, 8 Ohm) |
| − | * | + | * Rise time 1.6 µsec. |
| − | * | + | * Frequency response: 0 - 300 kHz (+0, -3dB) |
| − | * | + | * Signal-to-noise ratio: |
| − | ** 120dB ( | + | ** 120dB (according to IHF-66). |
| − | + | 70dB (according to IEC/NF) | |
| − | * | + | * Stereo channel separation: 70dB (according to IEC/NF) |
| − | ''' | + | '''Special Features''' |
| − | * | + | * Channel-separated level control |
| − | * | + | * Power meter with peak hold (can be switched off and switched 1/3 sec.) |
| − | * | + | * Headphone jack |
| − | == | + | == Note == |
| − | * | + | * Other models in the series: |
| − | + | * Kenwood preamplifier: | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | * Kenwood | ||
* [[Kenwood Basic C 1]] | * [[Kenwood Basic C 1]] | ||
* [[Kenwood Basic C 2]] | * [[Kenwood Basic C 2]] | ||
| − | * Kenwood | + | * Kenwood power amplifiers: |
* [[Kenwood Basic M 1]] | * [[Kenwood Basic M 1]] | ||
* [[Kenwood Basic M 1 A]] | * [[Kenwood Basic M 1 A]] | ||
| Line 71: | Line 66: | ||
| − | == | + | * [[Kenwood Corresponding Tuners: |
| − | * | + | * [[Kenwood BASIC T 1]] |
| + | * [[Kenwood BASIC T 2]] | ||
| + | |||
| + | |||
| + | * [[Corresponding Kenwood Tape Deck: | ||
| + | * [[Kenwood BASIC X 1]] | ||
| + | |||
| + | |||
| + | == Pictures == | ||
| + | * Picture: Kenwood Basic M 2 front view | ||
| + | [[File:Kenwood Basic M-2-1.jpg]] | ||
| + | |||
| + | |||
| + | == Reviews == | ||
| + | * Review by "Good Old Hifi": [[http://www.good-old-hifi.de/kenwood_basic_m2/]] | ||
| Line 78: | Line 87: | ||
| − | [[ | + | [[Category:Power Amplifiers]] |
Latest revision as of 07:44, 10 February 2020
Data[edit]
General
- Manufacturer: Kenwood
- Model: Basic M 2
- Type: Stereo power amplifier
- Years of manufacture: 1983 - 1987
- Manufactured in:
- Color: Black
- Remote control: no
- Power consumption: 500 W
- Dimensions: 440 x 158 x 373 mm
- Weight: 15.5 kg
- Original price approx.: 1'200 DM
Connections
- Number of inputs:
- 1 x Line In: 1 V / 47 kOhm
- Number of outputs:
- 2 x loudspeaker
Technical Data
- Rated power
- 8 Ohm: 2x 220 W RMS (20Hz - 20kHz, at 0.004% THD)
- Continuous power (at THD)
- 8 Ohm: 2x 230 W (at 0.7% THD, 63Hz - 12.5kHz, according to IEC/NF standard; at 1% THD, 1kHz, according to DIN standard)
4 Ohm: 2x 250 W (at 1% THD, 1kHz, according to DIN standard)
- Dynamic power
- 8 Ohm: 2x 346 W
4 Ohm: 2x 526 W Total harmonic distortion:
- 0.004% at nominal power (20Hz - 20kHz, 8 Ohm).
- 0.001% at nominal power (1kHz, 8 Ohm)
- Intermodulation distortion
- 0.004% at nominal power (60Hz:7kHz = 4:1, 8 Ohm)
- Attenuation factor: 1.000 (50Hz, 8 Ohm)
- Rise time 1.6 µsec.
- Frequency response: 0 - 300 kHz (+0, -3dB)
- Signal-to-noise ratio:
- 120dB (according to IHF-66).
70dB (according to IEC/NF)
- Stereo channel separation: 70dB (according to IEC/NF)
Special Features
- Channel-separated level control
- Power meter with peak hold (can be switched off and switched 1/3 sec.)
- Headphone jack
Note[edit]
- Other models in the series:
- Kenwood preamplifier:
- Kenwood Basic C 1
- Kenwood Basic C 2
- Kenwood power amplifiers:
- Kenwood Basic M 1
- Kenwood Basic M 1 A
- Kenwood Basic M 2
- Kenwood Basic M 2 A
- [[Kenwood Corresponding Tuners:
- Kenwood BASIC T 1
- Kenwood BASIC T 2
- [[Corresponding Kenwood Tape Deck:
- Kenwood BASIC X 1
Pictures[edit]
- Picture: Kenwood Basic M 2 front view
Reviews[edit]
- Review by "Good Old Hifi": [[1]]