Difference between revisions of "Onkyo A-8300"
| (3 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | General | |
| − | + | Manufacturer: [[Onkyo]] | |
| − | + | European model: A-8300 | |
| − | US | + | US Model: [[Onkyo A-8019]] |
| − | + | Years of manufacture: 1984/85 | |
| − | + | Type: Integrated amplifier | |
| − | + | Remote control: no | |
| − | + | Power consumption: 320 watts | |
| − | + | Dimensions: 435 x 122x 392mm (WxHxD) | |
| − | + | Weight: 11,8 kg | |
| − | + | Colour: black, silver | |
| − | + | New price approx.: 1.300,-- DEM | |
| Line 27: | Line 27: | ||
| − | + | Connections | |
| − | + | Number of inputs: 7 (Cinch) | |
| − | 2x | + | 2x phono |
Tuner | Tuner | ||
| Line 43: | Line 43: | ||
| − | + | Number of outputs: 4 | |
| − | + | Headphones (6.3mm jack) | |
2x Tape Rec. | 2x Tape Rec. | ||
| Line 51: | Line 51: | ||
Pre-Out | Pre-Out | ||
| − | (2x | + | (2x loudspeaker) |
| Line 57: | Line 57: | ||
| − | + | Technical data | |
| − | + | Music power: 2 x 240 watts into 4 ohms, 1kHz (Din) | |
| − | 2 x 150 Watt | + | 2 x 150 Watt into 8 Ohm, 1kHz (Din) |
| − | + | Sine power: 2 x 170 watts into 4 ohms, 1kHz (Din) | |
| − | 2 x 120 | + | 2 x 120 watts into 8 ohms, 1kHz (Din) |
| − | + | Power: 100 watts per channel, min. RMS, into 8 ohms, both channels driven, 20 Hz to 20 kHz, at a total harmonic distortion | |
| − | + | total harmonic distortion of no more than 0.012%. | |
| − | + | Total harmonic distortion: 0.012% at rated power | |
| − | + | Cross distortion factor: 0.005% at nominal power | |
| − | + | Attenuation factor: 50 (at 8 Ohm) | |
| − | + | Input (sensitivity/impedance) | |
| − | Phono(MM): | + | Phono(MM): 2.5mV / 50kOhm |
| − | Phono(78EQ): | + | Phono(78EQ): 2,5mV / 50kOhm |
| − | Phono(MC): | + | Phono(MC): 160uV / 100,220 Ohm |
| − | Tuner, CD, Aux, Tape: 150mV / 50kOhm | + | Tuner, CD, Aux, Tape: 150mV / 50kOhm |
| − | Tape Rec.: | + | Tape Rec.: 150mV / 3,3kOhm |
| − | Pre Out: | + | Pre Out: 1,5V / 600Ohm |
| − | Phono Overload: | + | Phono Overload: 210mV RMS at 1KHz, 0.012% Distortion |
| − | + | Output (Level/Impedance) | |
| − | + | Frequency response: 2 - 50,000 Hz ±1dB | |
| − | + | Tone control | |
| − | Bass: | + | Bass: ±8dB (at 70Hz) |
| − | + | Treble: ±8dB (at 20kHz) | |
| − | Loudness: | + | Loudness: yes (+6dB at 70Hz, +5dB at 20kHz) |
| − | Subsonic: | + | Subsonic: yes (15Hz, 20Hz, (6dB/octave)) |
| − | Mute: | + | Mute: yes -20dB |
| − | High Cut ( | + | High Cut (Treble Min.): 6KHz (6dB/Octave) |
Direct/Line-Straight: | Direct/Line-Straight: | ||
| − | + | Ripple Voltage Spacing (shorted): | |
| − | + | Stereo Channel Separation: | |
| − | + | Signal-to-noise ratio: phono (MM): 80dB (IHF A-202, 5mV input, 1 Watt output). | |
| − | Phono (MC): | + | Phono (MC): 73dB (IHF A-202, 0,5mV input, 1 Watt output) |
| − | CD, Tuner & Tape: 84dB (IHF A-202, 0.5V input, 1 Watt output) | + | CD, Tuner & Tape: 84dB (IHF A-202, 0.5V input, 1 Watt output) |
| + | == Pictures == | ||
| + | [[File:Onkyo A-8300.jpg]] | ||
| − | + | [[Category:Integrated amplifier]] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Latest revision as of 09:45, 8 February 2020
General
Manufacturer: Onkyo
European model: A-8300
US Model: Onkyo A-8019
Years of manufacture: 1984/85
Type: Integrated amplifier
Remote control: no
Power consumption: 320 watts
Dimensions: 435 x 122x 392mm (WxHxD)
Weight: 11,8 kg
Colour: black, silver
New price approx.: 1.300,-- DEM
Connections
Number of inputs: 7 (Cinch)
2x phono
Tuner
CD
Aux
2x Tape
Number of outputs: 4
Headphones (6.3mm jack)
2x Tape Rec.
Pre-Out
(2x loudspeaker)
Technical data
Music power: 2 x 240 watts into 4 ohms, 1kHz (Din)
2 x 150 Watt into 8 Ohm, 1kHz (Din)
Sine power: 2 x 170 watts into 4 ohms, 1kHz (Din)
2 x 120 watts into 8 ohms, 1kHz (Din)
Power: 100 watts per channel, min. RMS, into 8 ohms, both channels driven, 20 Hz to 20 kHz, at a total harmonic distortion total harmonic distortion of no more than 0.012%.
Total harmonic distortion: 0.012% at rated power
Cross distortion factor: 0.005% at nominal power
Attenuation factor: 50 (at 8 Ohm)
Input (sensitivity/impedance)
Phono(MM): 2.5mV / 50kOhm
Phono(78EQ): 2,5mV / 50kOhm
Phono(MC): 160uV / 100,220 Ohm
Tuner, CD, Aux, Tape: 150mV / 50kOhm
Tape Rec.: 150mV / 3,3kOhm
Pre Out: 1,5V / 600Ohm
Phono Overload: 210mV RMS at 1KHz, 0.012% Distortion
Output (Level/Impedance)
Frequency response: 2 - 50,000 Hz ±1dB
Tone control
Bass: ±8dB (at 70Hz)
Treble: ±8dB (at 20kHz)
Loudness: yes (+6dB at 70Hz, +5dB at 20kHz)
Subsonic: yes (15Hz, 20Hz, (6dB/octave))
Mute: yes -20dB
High Cut (Treble Min.): 6KHz (6dB/Octave)
Direct/Line-Straight:
Ripple Voltage Spacing (shorted):
Stereo Channel Separation:
Signal-to-noise ratio: phono (MM): 80dB (IHF A-202, 5mV input, 1 Watt output).
Phono (MC): 73dB (IHF A-202, 0,5mV input, 1 Watt output)
CD, Tuner & Tape: 84dB (IHF A-202, 0.5V input, 1 Watt output)
Pictures[edit]
