Difference between revisions of "T+A Pulsar R 2000 AC"
(→Daten) |
(→Daten) |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[T+A]] |
| − | * | + | * Model: R 2000 AC |
| − | * | + | * Years of manufacture:89-94 |
| − | * | + | * Made in:Germany |
| − | * | + | * Colour: Black/Grey |
| − | * | + | * Remote control: Yes |
| − | * | + | * Power consumption: |
| − | * | + | * Dimensions: 15x44x39x17.5 |
| − | * | + | * Weight: 17,5 kg |
| − | * | + | * Original price approx.: 4998.-DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
2x RCA in | 2x RCA in | ||
| − | 3x RCA in/out ( | + | 3x RCA in/out (tape loops) |
1x MM | 1x MM | ||
1x MC | 1x MC | ||
| − | 2x FM | + | 2x FM antenna |
| − | 1x AM | + | 1x AM antenna |
| − | * | + | * Number of outputs: |
3x RCA out (Tape) | 3x RCA out (Tape) | ||
| − | 1x XLR | + | 1x XLR preout |
| − | 2 | + | 2 pairs of speaker connectors A/B (also for banana plugs) |
| − | ''' | + | '''Technical data''' |
| − | '' | + | '''END STAGE''' |
| − | * | + | * Continuous power (at distortion). |
| − | + | 8 Ohm: 120 W | |
| − | + | 4 Ohm: 190 W | |
** 2 Ohm: 250 W | ** 2 Ohm: 250 W | ||
| − | * | + | * Dynamic power |
** 8 Ohm: 200 W | ** 8 Ohm: 200 W | ||
** 4 Ohm: 280 W | ** 4 Ohm: 280 W | ||
** 2 Ohm: 270 W | ** 2 Ohm: 270 W | ||
| − | * | + | * Total harmonic distortion: 0,004% |
| − | * | + | * Attenuation factor: >400 |
| − | * | + | * Frequency response: +0 -3 db 4-300 KHZ |
| − | + | ''PREFERENCES'' | |
| − | * | + | * Signal to noise ratio: High level 104db |
| − | * | + | * Frequency response : +0 -3db 3-350KHz |
| − | * | + | * Distortion factor: 0,003% |
| − | * | + | * Stereo channel separation: |
| − | * | + | * Tone control: |
| − | ** Bass: | + | ** Bass: Yes |
| − | ** | + | ** Treble: Yes |
| − | * Loudness: | + | * Loudness: Yes |
| + | * Flat : Yes | ||
* High Filter: | * High Filter: | ||
* Low Filter (Subsonic): | * Low Filter (Subsonic): | ||
| Line 59: | Line 60: | ||
| − | '' | + | ''RECEIVE STAGE'' |
| − | * | + | * Receive: Two 75Ohm inputs for cable and house connection. |
| − | * | + | * Frequencies: |
| − | ** | + | ** FM: 87.5 MHz - 108 MHz |
** MW: 522 kHz - 1611 kHz | ** MW: 522 kHz - 1611 kHz | ||
| − | * | + | * Frequency response: +-1,5db 10Hz - 15Khz |
| − | + | Input sensitivity: At 75Ohm mono 0,9µV , stereo 33,0µV | |
| − | + | Distortion factor: Mono/Stereo 0,1/0,2% | |
| − | * | + | * Signal to noise ratio: >76/74db |
| − | * | + | * Channel separation: |
| − | * | + | * Selectivity: 70db |
| − | * | + | * Co-wave selection: |
| − | * | + | * Spurious wave selection: |
| − | * | + | * IF attenuation: |
| − | * | + | * IF attenuation: |
| − | * AM | + | * AM suppression: |
| − | * | + | * Output level: |
| − | * RDS: | + | * RDS: yes |
| − | * | + | * Station memory: 100 |
| − | ''' | + | '''Special Features''' |
| − | * AudioCon | + | * AudioCon system |
| − | == | + | == Remarks == |
| − | + | Other models of the same series: | |
| − | == | + | == Pictures == |
| − | [[ | + | [[File:T&A Pulsar R 2000 AC.jpg]] |
| − | == | + | == Reports == |
== Links == | == Links == | ||
| − | [[ | + | [[Category:Receiver]] |
Latest revision as of 07:09, 4 November 2019
Data[edit]
General
- Manufacturer: T+A
- Model: R 2000 AC
- Years of manufacture:89-94
- Made in:Germany
- Colour: Black/Grey
- Remote control: Yes
- Power consumption:
- Dimensions: 15x44x39x17.5
- Weight: 17,5 kg
- Original price approx.: 4998.-DM
Connections
- Number of inputs:
2x RCA in 3x RCA in/out (tape loops) 1x MM 1x MC 2x FM antenna 1x AM antenna
- Number of outputs:
3x RCA out (Tape) 1x XLR preout 2 pairs of speaker connectors A/B (also for banana plugs)
Technical data
END STAGE
- Continuous power (at distortion).
8 Ohm: 120 W 4 Ohm: 190 W
- 2 Ohm: 250 W
- Dynamic power
- 8 Ohm: 200 W
- 4 Ohm: 280 W
- 2 Ohm: 270 W
- Total harmonic distortion: 0,004%
- Attenuation factor: >400
- Frequency response: +0 -3 db 4-300 KHZ
PREFERENCES
- Signal to noise ratio: High level 104db
- Frequency response : +0 -3db 3-350KHz
- Distortion factor: 0,003%
- Stereo channel separation:
- Tone control:
- Bass: Yes
- Treble: Yes
- Loudness: Yes
- Flat : Yes
- High Filter:
- Low Filter (Subsonic):
- Mute:
- Direct/Line-Straight:
RECEIVE STAGE
- Receive: Two 75Ohm inputs for cable and house connection.
- Frequencies:
- FM: 87.5 MHz - 108 MHz
- MW: 522 kHz - 1611 kHz
- Frequency response: +-1,5db 10Hz - 15Khz
Input sensitivity: At 75Ohm mono 0,9µV , stereo 33,0µV Distortion factor: Mono/Stereo 0,1/0,2%
- Signal to noise ratio: >76/74db
- Channel separation:
- Selectivity: 70db
- Co-wave selection:
- Spurious wave selection:
- IF attenuation:
- IF attenuation:
- AM suppression:
- Output level:
- RDS: yes
- Station memory: 100
Special Features
- AudioCon system
Remarks[edit]
Other models of the same series:
Pictures[edit]
