Difference between revisions of "Yamaha CA-410 II"
(kk) |
|||
| (2 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Yamaha]] |
| − | * | + | * Model: CA-410 II |
| − | * | + | * Type: Integrated amplifier |
| − | * | + | * Years of manufacture: 1978-1979 |
| − | * | + | * Color: silver |
| − | * | + | * Remote control: no |
| − | * | + | * Power consumption: 300 W max. |
| − | * | + | * Dimensions: 435 mm × 139 mm × 333 mm (W × H × D) |
| − | * | + | * Weight: 7.8 kg |
| − | * | + | * Original price approx.: 250 USD, 800 DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
| − | ** Phono MM, | + | ** Phono MM, tuner, aux, 2 × tape. |
| − | * | + | * Number of outputs: |
| − | ** | + | ** Loudspeaker |
| − | ** | + | ** 2 × Rec-Out |
| − | ** | + | ** Headphones |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Continuous power (at distortion) |
| − | ** 8 Ohm: | + | ** 8 Ohm: 2 × 40 Watt |
| − | + | 4 Ohm: 2 × 53 Watt | |
| − | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
| − | * | + | * Total harmonic distortion: 0.01 % |
| − | * | + | * Attenuation factor: >50 |
| − | * | + | * Input (Sensitivity / Impedance) |
| − | ** Phono | + | ** Phono 3 mV / 47 kOhm |
| − | ** Tuner, Tape, Aux | + | ** Tuner, Tape, Aux 150 mV / 47 kOhm |
| − | * | + | * Output (Level / Impedance) |
| − | ** Rec-Out | + | ** Rec-Out 150 mV / 600 Ohm |
| − | * | + | * Frequency response: |
| − | * | + | * Tone control: |
| − | ** Bass: | + | ** Bass: ±10 dB at 20 Hz |
| − | ** | + | ** Treble: ±10 dB at 20,000 Hz |
| − | * Loudness: | + | * Loudness: adjustable |
| − | * Subsonic: | + | * Subsonic: 12 Hz / -12 dB fixed |
| − | * Mute: | + | * Mute: yes |
| − | * Direct/Line-Straight: | + | * Direct/Line-Straight: no |
| − | * | + | * Ripple spacing (short-circuited): 100 dB |
| − | * | + | * Stereo Channel Separation: |
| − | * | + | * Signal-to-noise ratio: |
| − | ''' | + | '''Special Features''' |
| − | * | + | * Power display with two pointer instruments |
| − | * Record | + | * Record selector |
* High-Filter | * High-Filter | ||
| − | * Mono/ | + | * Mono/stereo switch |
| − | == | + | == Notes == |
| − | * | + | * Other models in the same series: |
| + | * [[Yamaha CA-410 II]] | ||
| + | * [[Yamaha CA-610 II]] | ||
| + | * [[Yamaha CA-810]] | ||
| + | * [[Yamaha CA-1010]] | ||
| + | * [[Yamaha CA-2010]] | ||
| − | == | + | == Pictures == |
| − | == | + | == Reports == |
| Line 71: | Line 76: | ||
| − | [[ | + | [[Category:Integrated amplifier]] |
Latest revision as of 14:45, 5 October 2019
Data[edit]
General
- Manufacturer: Yamaha
- Model: CA-410 II
- Type: Integrated amplifier
- Years of manufacture: 1978-1979
- Color: silver
- Remote control: no
- Power consumption: 300 W max.
- Dimensions: 435 mm × 139 mm × 333 mm (W × H × D)
- Weight: 7.8 kg
- Original price approx.: 250 USD, 800 DM
Connections
- Number of inputs:
- Phono MM, tuner, aux, 2 × tape.
- Number of outputs:
- Loudspeaker
- 2 × Rec-Out
- Headphones
Technical Data
- Continuous power (at distortion)
- 8 Ohm: 2 × 40 Watt
4 Ohm: 2 × 53 Watt
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.01 %
- Attenuation factor: >50
- Input (Sensitivity / Impedance)
- Phono 3 mV / 47 kOhm
- Tuner, Tape, Aux 150 mV / 47 kOhm
- Output (Level / Impedance)
- Rec-Out 150 mV / 600 Ohm
- Frequency response:
- Tone control:
- Bass: ±10 dB at 20 Hz
- Treble: ±10 dB at 20,000 Hz
- Loudness: adjustable
- Subsonic: 12 Hz / -12 dB fixed
- Mute: yes
- Direct/Line-Straight: no
- Ripple spacing (short-circuited): 100 dB
- Stereo Channel Separation:
- Signal-to-noise ratio:
Special Features
- Power display with two pointer instruments
- Record selector
- High-Filter
- Mono/stereo switch
Notes[edit]
- Other models in the same series:
- Yamaha CA-410 II
- Yamaha CA-610 II
- Yamaha CA-810
- Yamaha CA-1010
- Yamaha CA-2010