Difference between revisions of "Kenwood TK-55"
(Die Seite wurde neu angelegt: „__NOTOC__ == Daten == {{Navigation}} '''Allgemein''' * Hersteller: Kenwood * Modell: TK-55 (Baugleich mit TK-66, aber ohne MW) * Baujahre: 1967 - 1970 * He…“) |
|||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: TK-55 (identical in construction with TK-66, but without MW) |
− | * | + | * Years of manufacture: 1967 - 1970 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver, black, wood foil |
− | * | + | * Power consumption: 90 W at full output, 20 W without signal |
− | * | + | * Dimensions: 420 x 140 x 305 mm |
− | * | + | * Weight: 11 kg |
− | * | + | * Original price approx.: 750 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
** Phono: 2 mV | ** Phono: 2 mV | ||
** Tape HD: 2,5 mV | ** Tape HD: 2,5 mV | ||
Line 22: | Line 22: | ||
*** Cinch: 150 mV | *** Cinch: 150 mV | ||
*** DIN: 150 mV | *** DIN: 150 mV | ||
− | ** | + | ** Antenna: FM (75 Ohm Unbalanced / 300 Ohm Balanced), AM |
− | * | + | * Number of Outputs: |
** Tape Rec: | ** Tape Rec: | ||
*** Cinch: 160 mV / 50 kOhm | *** Cinch: 160 mV / 50 kOhm | ||
*** DIN: 30 mV | *** DIN: 30 mV | ||
− | + | Headphones | |
− | ** 2 | + | ** 2 pairs of speakers |
− | ''' | + | '''Technical Data Tuner Part''' |
− | * | + | * Reception: FM |
− | * | + | * Frequencies: |
− | ** | + | ** VHF: 88 - 108 MHz |
− | * | + | * Frequency response: |
− | * | + | * Input sensitivity: |
− | ** | + | ** VHF: 2.0µV |
− | * | + | * Distortion factor: < 0,6 % |
− | * Signalrauschabstand: > 60 dB | + | * Signalrauschabstand: >60 dB |
− | * | + | * Common mode selection: 2.5 dB |
− | * | + | * Channel separation (400 Hz): > 38 dB |
− | * | + | * selectivity: |
− | ** | + | ** FM: > 45 dB |
− | * | + | * Common mode selection: |
− | ** | + | ** VHF: > 80 dB |
− | * | + | * Spurious wave selection: > 45 dB |
− | * | + | * IF attenuation: 66 dB |
− | * | + | * IF attenuation: |
− | ''' | + | '''Technical Data Amplifier Part''' |
− | * | + | * Continuous power (at distortion factor) |
** 8 Ohm: 2 x 20 W | ** 8 Ohm: 2 x 20 W | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * dynamic power |
** 8 Ohm: 50 W (IHF) | ** 8 Ohm: 50 W (IHF) | ||
** 4 Ohm: 60 W (IHF) | ** 4 Ohm: 60 W (IHF) | ||
− | * | + | * Total harmonic distortion: < 0.9 % at rated power |
− | * | + | * Attenuation factor: 23 at 8 Ohm |
− | * | + | * Frequency response: 20 - 50000 Hz (±2 dB) |
− | * | + | * Power bandwidth (IHF): 20 - 30000 Hz (0.5% THD, -3 dB) |
− | * | + | * Signal-to-noise ratio: |
** Phono: 60 dB | ** Phono: 60 dB | ||
− | + | Tape HD: 60 dB | |
− | + | AUX: 70 dB | |
** Tape: 70 dB | ** Tape: 70 dB | ||
− | * | + | * Tone control: |
− | ** Bass: ± 10 dB | + | ** Bass: ± 10 dB at 50 Hz |
− | + | Treble: ± 10 dB at 10 kHz | |
* Loudness: + 8 dB / 100 Hz, + 3 dB / 10 kHz | * Loudness: + 8 dB / 100 Hz, + 3 dB / 10 kHz | ||
* Low Filter: 80 Hz Cutoff | * Low Filter: 80 Hz Cutoff | ||
Line 75: | Line 75: | ||
− | ''' | + | '''Special Features''' |
− | * Center | + | * Center channel output |
− | * | + | * FM Muting |
− | * Mono Stereo | + | * Mono Stereo Switch |
− | == | + | == Comments == |
− | * | + | * Other models in the same series: |
− | + | * [[Kenwood TK-40 L]] | |
− | + | * [[Kenwood TK-55]] | |
− | + | * [[Kenwood TK-66 U]] | |
− | + | * [[Kenwood TK-88 U]] | |
− | + | * [[Kenwood TK-140 U]] | |
− | + | * [[Kenwood TK-140 X]] | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | == | + | == Pictures == |
− | * | + | * Image: Kenwood TK-55 |
− | [[ | + | [[File:Kenwood TK-55-1.jpg]] |
− | == | + | == Reports == |
Line 108: | Line 102: | ||
− | [[ | + | [[Category:Receiver]]</0,6> |
Latest revision as of 10:40, 18 September 2019
Data[edit]
General
- Manufacturer: Kenwood
- Model: TK-55 (identical in construction with TK-66, but without MW)
- Years of manufacture: 1967 - 1970
- Made in: Japan
- Color: Silver, black, wood foil
- Power consumption: 90 W at full output, 20 W without signal
- Dimensions: 420 x 140 x 305 mm
- Weight: 11 kg
- Original price approx.: 750 DM
Connections
- Number of inputs:
- Phono: 2 mV
- Tape HD: 2,5 mV
- Aux: 150 mV
- Tape Play:
- Cinch: 150 mV
- DIN: 150 mV
- Antenna: FM (75 Ohm Unbalanced / 300 Ohm Balanced), AM
- Number of Outputs:
- Tape Rec:
- Cinch: 160 mV / 50 kOhm
- DIN: 30 mV
- Tape Rec:
Headphones
- 2 pairs of speakers
Technical Data Tuner Part
- Reception: FM
- Frequencies:
- VHF: 88 - 108 MHz
- Frequency response:
- Input sensitivity:
- VHF: 2.0µV
- Distortion factor: < 0,6 %
- Signalrauschabstand: >60 dB
- Common mode selection: 2.5 dB
- Channel separation (400 Hz): > 38 dB
- selectivity:
- FM: > 45 dB
- Common mode selection:
- VHF: > 80 dB
- Spurious wave selection: > 45 dB
- IF attenuation: 66 dB
- IF attenuation:
Technical Data Amplifier Part
- Continuous power (at distortion factor)
- 8 Ohm: 2 x 20 W
- 4 Ohm:
- dynamic power
- 8 Ohm: 50 W (IHF)
- 4 Ohm: 60 W (IHF)
- Total harmonic distortion: < 0.9 % at rated power
- Attenuation factor: 23 at 8 Ohm
- Frequency response: 20 - 50000 Hz (±2 dB)
- Power bandwidth (IHF): 20 - 30000 Hz (0.5% THD, -3 dB)
- Signal-to-noise ratio:
- Phono: 60 dB
Tape HD: 60 dB AUX: 70 dB
- Tape: 70 dB
- Tone control:
- Bass: ± 10 dB at 50 Hz
Treble: ± 10 dB at 10 kHz
- Loudness: + 8 dB / 100 Hz, + 3 dB / 10 kHz
- Low Filter: 80 Hz Cutoff
- High Filter: 6000 Hz Cutoff
Special Features
- Center channel output
- FM Muting
- Mono Stereo Switch
Comments[edit]
- Other models in the same series:
- Kenwood TK-40 L
- Kenwood TK-55
- Kenwood TK-66 U
- Kenwood TK-88 U
- Kenwood TK-140 U
- Kenwood TK-140 X
Pictures[edit]
- Image: Kenwood TK-55
Reports[edit]
Links[edit]
</0,6>