Difference between revisions of "Mitsubishi SS-20"

 
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
==Technische Daten==
+
__NOTOC__
Lautsprecherbox SS-20
+
== Data ==
Prinzip: Geschlossene Box, 3 Wege
+
{{navigation}}
Übertragungsbereich: 35 - 23.000 Hz
+
'''General'''
Nennbelastbarkeit: 90 Watt
+
* Manufacturer: [[Mitsubishi]]
Musikbelastbarkeit: 120 Watt
+
* Model: SS-20
Impedanz: 8 Ohm
+
* Type: Loudspeaker
Made in Germany
+
* Years of manufacture: 1982 - 1984
MITSUBISHI ELECTRIC
+
* Made in: Germany
 +
* Color: Walnut
 +
* Dimensions (WxHxD): 310 x 540 x 250 mm
 +
* Weight: 10,5 kg
 +
* Original price approx.: 350 DM / piece
  
==Hinweise für Bastler==
 
  
Allgemeiner Hinweis zur 8-Ohm-Impedanz:
+
'''Technical Data'''
Einige Lautsprecher arbeiten íntern mit 4 Ohm
+
* Type: 3-way closed compact speaker
und erzielen die 8 Ohm am Anschluß durch einen
+
* Chassis:
zusätzlichen 4 Ohm Draht-Widerstand (meist mit eckiger Keramik-Ummantelung) am Anschluß.
+
** Low frequency: 200 mm cone
 +
Midrange: 100 mm cone
 +
Tweeter: 25 mm dome
 +
Power handling (nominal/music): 90 W / 120 Watt
 +
Efficiency:
 +
* Frequency response: 34 - 23,000 Hz.
 +
* Transient response:
 +
* Impedance: 8 Ohm
  
Ob das bei diesem Modell auch so ist, weiß ich nicht.
 
Wer einen 4-Ohm-fähigen Verstärker hat,
 
kann solche Boxen umbauen:
 
Baßlautsprecher herausschrauben,
 
Vorwiderstand überbrücken und Impedanz auf dem Typenschild zu 4 Ohm ändern
 
(das Typenschild zu ändern ist wichtig weil eine 4-Ohm-Box
 
einen Verstärker mit 8 Ohm Mindestimpedanz überlasten kann,
 
z. B. Mitsubishi DA-R45P und DA-R47P).
 
  
Der Vorteil ist, daß ein Verstärker bei 4 Ohm mehr leistet als bei 8 Ohm.
+
'''Special Features'''
Der Nachteil ist wie gesagt, daß die Box dann nicht mehr an alle Verstärker anschließbar ist.
+
* Front cover removable
  
==Links==
 
Weitere Daten (z. B. Maße), siehe:
 
http://www.radiomuseum.org/r/mitsubishi_ss_20.html
 
  
[[Kategorie: Lautsprecher]]
+
== Remarks ==
 +
* General note on 8 Ohm impedance: Some loudspeakers work internally with 4 Ohm and achieve the 8 Ohm at the connection by an additional 4 Ohm wire resistor (usually with square ceramic coating) at the connection.
 +
* I don't know if this is also the case with this model. If you have a 4 Ohm capable amplifier, you can convert such speakers:
 +
** Unscrew the bass speaker, bridge the series resistor and change the impedance on the nameplate to 4 ohms (changing the nameplate is important because a 4 ohm speaker can overload an amplifier with 8 ohms minimum impedance, e.g. Mitsubishi DA-R45P and DA-R47P).
 +
** The advantage is that an amplifier will perform better at 4 ohms than at 8 ohms.
 +
The disadvantage is, as already mentioned, that the speaker can no longer be connected to all amplifiers.
 +
 
 +
 
 +
* Other models of the same series:
 +
* [[Mitsubishi SS-7 G]]
 +
* [[Mitsubishi SS-20]]
 +
* [[Mitsubishi DS-25 B]]
 +
* [[Mitsubishi DS-32 B]]
 +
* [[Mitsubishi DS-501]]
 +
* [[Mitsubishi MS-40]]
 +
 
 +
 
 +
== Pictures ==
 +
* Extract from brochure: Mitsubishi SS-20, DS-25 B, DS-32 B
 +
[[File:Mitsubishi SS-20-Prospekt-1.jpg]]
 +
 
 +
 
 +
== Reports ==
 +
 
 +
 
 +
== Links ==
 +
 
 +
 
 +
[[Category:Loudspeaker]]

Latest revision as of 04:54, 10 July 2019

Data[edit]

General

  • Manufacturer: Mitsubishi
  • Model: SS-20
  • Type: Loudspeaker
  • Years of manufacture: 1982 - 1984
  • Made in: Germany
  • Color: Walnut
  • Dimensions (WxHxD): 310 x 540 x 250 mm
  • Weight: 10,5 kg
  • Original price approx.: 350 DM / piece


Technical Data

  • Type: 3-way closed compact speaker
  • Chassis:
    • Low frequency: 200 mm cone

Midrange: 100 mm cone Tweeter: 25 mm dome Power handling (nominal/music): 90 W / 120 Watt Efficiency:

  • Frequency response: 34 - 23,000 Hz.
  • Transient response:
  • Impedance: 8 Ohm


Special Features

  • Front cover removable


Remarks[edit]

  • General note on 8 Ohm impedance: Some loudspeakers work internally with 4 Ohm and achieve the 8 Ohm at the connection by an additional 4 Ohm wire resistor (usually with square ceramic coating) at the connection.
  • I don't know if this is also the case with this model. If you have a 4 Ohm capable amplifier, you can convert such speakers:
    • Unscrew the bass speaker, bridge the series resistor and change the impedance on the nameplate to 4 ohms (changing the nameplate is important because a 4 ohm speaker can overload an amplifier with 8 ohms minimum impedance, e.g. Mitsubishi DA-R45P and DA-R47P).
    • The advantage is that an amplifier will perform better at 4 ohms than at 8 ohms.

The disadvantage is, as already mentioned, that the speaker can no longer be connected to all amplifiers.



Pictures[edit]

  • Extract from brochure: Mitsubishi SS-20, DS-25 B, DS-32 B

Mitsubishi SS-20-Prospekt-1.jpg


Reports[edit]

Links[edit]