Difference between revisions of "JVC A-10X"

 
(36 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
== Daten ==
+
== Data ==
'''JVC Amplifier A-10X Verstärker'''
+
'''''JVC Stereo Amplifier A-10X (Amplifier)'''''
*Maße: BxHxT. 42,0 x 86,5 x 24,6 cm
+
{{navigation}}
*Gewicht: 4,4 Kg
 
*Leistungsaufnahme: 220 Volt, 50 Hz, 160 Watt (Europa)
 
'''Technische Daten:'''
 
*Ausgangsleistung:
 
**25 Watt pro Kanal, eff, min.,beide Kanäle angesteuert, an 8 Ohm,
 
**von 20 Hz bis 20 kHz mit nicht mehr als 0,1 %Klirrtaktor,
 
**28 Watt pro Kanal, eff, min.,beide Kanäle angesteuert, an 8 Ohm,
 
**von 20 Hz bis 20 kHz mit nicht mehr als 0,1 % Klirrfaktor,
 
*Klirrfaktor:
 
**0,1% bei Nennleistung, von 20 Hz bis 20 kHz, 8 Ohm, 0,1% bei Nennleistung bei 1 kHz, 8 Ohm,
 
*Intermodulationsverzerrung: 0,1% bei Nennleistung, 8 Ohm
 
*Leistungsbandbreite: 10 Hz-30 kHz,(IHF, beide Kanäleangesteuert, 8 ohm 0,1 % Klirrfaktor)
 
*Dämpfungsfaktor: 30 (1 kHz, 8 Ohm)
 
*Klangregler:
 
**BASS: 100 Hz ± 8 dB
 
**Höhen: 10 kHz ± 8 dB
 
**Loudness Regelung: (Lautstärkereglerin -30 dB Stellung): +8 dB bei 100 Hz (Max.)
 
*Eingangsempfindlichkeit/Impedanz:
 
*Phono: 2,5 mV/47 kOhm
 
*TUNER, AUX, TAPE: 150 mV/40 kOhm 
 
*Ausgangspegel: 150 mV
 
*Phono-RIAA-Abweichung: ±1,0 dB (40 Hz - 15 kHz)
 
*Phono-Überlastgrenze: 100 mV (1 kHz)   
 
*Signal/Rauschabstand: Phono: 67 dB (neue IHF-Norm), 70 dB (IHF) 50 db(DIN)
 
*TUNER, AUX, TAPE: 75 dB (neue IHF-Norm), 90 dB (IHF) 60 dB (DIN)
 
*Preis 1982: etwa 360 DM (DDR Intershop)
 
  
== Bilder ==
+
'''General:'''
[[Datei:JVC_A_10X.jpg|Beschreibung]]
+
* Manufacturer: [[JVC]] (Japan)
 +
* Model: A-10X
 +
Type: Integrated amplifier
 +
* Years of manufacture: 1980 - 1982
 +
* Power consumption: 160 watts (Europe)
 +
* Dimensions: 420 x 86 x 246 mm (WxHxD)
 +
* Weight: 4,4 kg
 +
* Price 1982: 360 DM (DDR Intershop)
 +
 
 +
 
 +
'''Technical data:'''
 +
* Output power:
 +
** 25 watts per channel, eff, min, both channels driven, into 8 ohms,
 +
** from 20- 20 kHz with no more than 0.1 % harmonic distortion,
 +
28 watts per channel, rms, min., both channels driven, into 8 ohms,
 +
** from 20- 20 kHz with no more than 0.1 % harmonic distortion,
 +
* distortion factor:
 +
** 0.1% at rated power, from 20- 20,000 Hz, 8 ohms, and 0.1% at rated power at 1 kHz, 8 ohms,
 +
* Intermodulation distortion: 0.1 % at rated power, 8 ohms
 +
* Power bandwidth: 10- 30,000 Hz, (IHF, both channels driven, 8 ohms 0.1 % distortion)
 +
* Attenuation Factor: 30 (1 kHz, 8 ohms).
 +
* Tone control:
 +
** BASS: 100 Hz ± 8 dB
 +
** Treble: 10 kHz ± 8 dB
 +
** Loudness control: (volume control -30 dB position): + 8 dB at 100 Hz (Max).
 +
* Input sensitivity/ Impedance:
 +
* Phono: 2.5 mV/ 47 kOhm.
 +
* TUNER, AUX, TAPE: 150 mV/ 40 kOhm 
 +
* Output level: 150 mV
 +
* Phono RIAA deviation: ± 1.0 dB (40- 15 kHz)
 +
* Phono overload limit: 100 mV (1 kHz)
 +
* Signal-to-noise ratio: Phono: 67 dB (new IHF standard), 70 dB (IHF) 50 dB (DIN)
 +
* TUNER, AUX, TAPE: 75 dB (new IHF standard), 90 dB (IHF) 60 dB (DIN)
 +
 
 +
 
 +
== Remarks ==
 +
* This amplifier is compatible with the tuner [[JVC T-10XL]]
 +
* and the cassette deck [[JVC KD-D2]]
 +
 
 +
 
 +
== Pictures ==
 +
 
 +
[[File:JVC_A_10x_Front.jpg|Beschreibung]]
 +
 
 +
[[File:JVC_A10X_innen2.jpg|Beschreibung]]
 +
 
 +
[[File:JVC_TX_AX_KD.jpg|Beschreibung]]
 +
 
 +
 
 +
== Reports ==
 +
 
 +
 
 +
== Links ==
 +
 
 +
[[Category:Integrated amplifier]]

Latest revision as of 00:09, 3 July 2019

Data[edit]

JVC Stereo Amplifier A-10X (Amplifier)


General:

  • Manufacturer: JVC (Japan)
  • Model: A-10X

Type: Integrated amplifier

  • Years of manufacture: 1980 - 1982
  • Power consumption: 160 watts (Europe)
  • Dimensions: 420 x 86 x 246 mm (WxHxD)
  • Weight: 4,4 kg
  • Price 1982: 360 DM (DDR Intershop)


Technical data:

  • Output power:
    • 25 watts per channel, eff, min, both channels driven, into 8 ohms,
    • from 20- 20 kHz with no more than 0.1 % harmonic distortion,

28 watts per channel, rms, min., both channels driven, into 8 ohms,

    • from 20- 20 kHz with no more than 0.1 % harmonic distortion,
  • distortion factor:
    • 0.1% at rated power, from 20- 20,000 Hz, 8 ohms, and 0.1% at rated power at 1 kHz, 8 ohms,
  • Intermodulation distortion: 0.1 % at rated power, 8 ohms
  • Power bandwidth: 10- 30,000 Hz, (IHF, both channels driven, 8 ohms 0.1 % distortion)
  • Attenuation Factor: 30 (1 kHz, 8 ohms).
  • Tone control:
    • BASS: 100 Hz ± 8 dB
    • Treble: 10 kHz ± 8 dB
    • Loudness control: (volume control -30 dB position): + 8 dB at 100 Hz (Max).
  • Input sensitivity/ Impedance:
  • Phono: 2.5 mV/ 47 kOhm.
  • TUNER, AUX, TAPE: 150 mV/ 40 kOhm
  • Output level: 150 mV
  • Phono RIAA deviation: ± 1.0 dB (40- 15 kHz)
  • Phono overload limit: 100 mV (1 kHz)
  • Signal-to-noise ratio: Phono: 67 dB (new IHF standard), 70 dB (IHF) 50 dB (DIN)
  • TUNER, AUX, TAPE: 75 dB (new IHF standard), 90 dB (IHF) 60 dB (DIN)


Remarks[edit]


Pictures[edit]

Beschreibung

Beschreibung

Beschreibung


Reports[edit]

Links[edit]