Difference between revisions of "Elac EMM-390 HB 30"
(→Daten) |
|||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Elac]] |
| − | * | + | * Model: EMM 390 HB 30 |
| − | * | + | * Years of manufacture: approx. 1985/86 |
| − | * | + | * Manufactured in: |
| − | * | + | * Colour: |
| − | * | + | * Weight: 6.5 g |
| − | * | + | * Original price: approx. 600,- DM |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Frequency response: 10 - 50.000 Hz |
| − | * | + | * Channel separation: > 28 dB at 1 KHz |
| − | * | + | * Channel balance: < 1 dB |
| − | * | + | * Crosstalk attenuation: |
| − | * | + | * Output voltage: 0.05 mV/cm/s |
| − | * | + | * Terminating resistor: 100 - 150 Ohm |
| − | * | + | * Induction: |
| − | * | + | * Needle type: Van den Hul II 4/80 µm |
| − | * | + | * Recommended contact force: 10 - 12.5 mN |
| − | * | + | * Needle compliance: 30 µm/mN static |
| − | ''' | + | '''Special equipment''' |
| − | * | + | * here, if available |
| + | == Remarks == | ||
| + | Other models of the same series: | ||
| − | == | + | == Pictures == |
| − | |||
| − | == | + | == Reports == |
| − | |||
| − | |||
== Links == | == Links == | ||
| − | [[ | + | [[Category:Pickups]] |
Latest revision as of 06:30, 3 January 2008
Data
General
- Manufacturer: Elac
- Model: EMM 390 HB 30
- Years of manufacture: approx. 1985/86
- Manufactured in:
- Colour:
- Weight: 6.5 g
- Original price: approx. 600,- DM
Technical Data
- Frequency response: 10 - 50.000 Hz
- Channel separation: > 28 dB at 1 KHz
- Channel balance: < 1 dB
- Crosstalk attenuation:
- Output voltage: 0.05 mV/cm/s
- Terminating resistor: 100 - 150 Ohm
- Induction:
- Needle type: Van den Hul II 4/80 µm
- Recommended contact force: 10 - 12.5 mN
- Needle compliance: 30 µm/mN static
Special equipment
- here, if available
Remarks
Other models of the same series: