Difference between revisions of "Kenwood KR-5030"
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Kenwood]] |
− | * | + | * Model: KR-5030 |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1978 - 1980 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 450 W |
− | * | + | * Dimensions: 480 x 149 x 405 mm (WxHxD) |
− | * | + | * Weight: 12 kg |
− | * | + | * Original price approx.: 1'098 DM (1978) |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
** Phono MM (Cinch): 2,5 mV / 50 kOhm | ** Phono MM (Cinch): 2,5 mV / 50 kOhm | ||
− | + | 2x Tape In (Cinch/DIN): 150 mV / 45 kOhm | |
** Aux (Cinch): 150 mV / 45 kOhm | ** Aux (Cinch): 150 mV / 45 kOhm | ||
− | ** | + | ** Antenna FM (75/300 Ohm), AM |
− | * | + | * Number of outputs: |
** 2x Tape Out (Cinch/DIN): | ** 2x Tape Out (Cinch/DIN): | ||
− | ** | + | ** Headphones (6.3 mm jack, front) |
− | ** 2 | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power |
− | ** 8 Ohm: 2x 60 W (20-20 | + | ** 8 Ohm: 2x 60 W (20-20,000 Hz) |
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.05% (at rated power) |
− | * | + | * Attenuation Factor: |
− | * | + | * Frequency Response: |
− | ** | + | ** Power bandwidth: 10 - 45,000 Hz |
− | * | + | * Signal-to-noise ratio: (IHF-A) |
** Phono MM: 78 dB | ** Phono MM: 78 dB | ||
** AUX, Tape: 95 dB | ** AUX, Tape: 95 dB | ||
− | * | + | * Stereo Channel Separation: |
− | * | + | * Tone control: |
− | ** Bass: ±8 dB | + | ** Bass: ±8 dB at 100 Hz |
− | + | Treble: ±8 dB at 10 kHz | |
* Loudness: +9 dB (100 Hz) | * Loudness: +9 dB (100 Hz) | ||
− | * High Filter: | + | * High Filter: no |
* Low Filter (Subsonic): 15 Hz (6 dB/oct) | * Low Filter (Subsonic): 15 Hz (6 dB/oct) | ||
* Mute: FM Muting | * Mute: FM Muting | ||
− | * Direct/Line-Straight: | + | * Direct/Line-Straight: yes |
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
− | + | MW: 525 - 1605 kHz | |
− | * | + | * Frequency response: 20 - 15,000 Hz |
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 1.2 µV (IHF) |
− | + | MW: 15 µV | |
− | * | + | * Distortion factor: (1 kHz) |
− | ** | + | ** FM: 0.15% (mono), 0.3% (stereo) |
− | * | + | * Signal-to-noise ratio: (IHF-A) |
− | + | FM: 73 dB (mono), 68 dB (stereo) | |
+ | MW: 50 dB | ||
+ | * Channel separation: | ||
+ | ** FM: 40 dB (at 1 kHz). | ||
+ | * Selectivity: | ||
+ | ** FM: 65 dB | ||
+ | * Equal wave selection: | ||
+ | ** FM: 1.0 dB | ||
+ | * Spurious wave selection: | ||
+ | ** FM: 72 dB | ||
+ | * Image frequency attenuation: | ||
+ | ** FM: 60 dB | ||
** MW: 50 dB | ** MW: 50 dB | ||
− | + | IF attenuation: | |
− | + | ** FM: 86 dB | |
− | + | * AM suppression: 60 dB | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | * | ||
− | * | ||
− | * AM | ||
− | |||
− | |||
− | |||
− | + | == Comments == | |
− | + | * Other models in the same series: | |
− | |||
− | |||
− | == | ||
− | * | ||
* [[Kenwood KR-2090]] | * [[Kenwood KR-2090]] | ||
* [[Kenwood KR-3090]] | * [[Kenwood KR-3090]] | ||
Line 102: | Line 95: | ||
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Kenwood KR-5030 |
− | [[ | + | [[File:Kenwood KR-5030-1.jpg]] |
− | == | + | == Reports == |
+ | |||
== Links == | == Links == | ||
− | [[ | + | |
+ | [[Category:Receiver]] |
Latest revision as of 07:07, 18 May 2019
Data[edit]
General
- Manufacturer: Kenwood
- Model: KR-5030
- Type: Receiver
- Years of manufacture: 1978 - 1980
- Made in: Japan
- Color: Silver
- Remote control: no
- Power consumption: 450 W
- Dimensions: 480 x 149 x 405 mm (WxHxD)
- Weight: 12 kg
- Original price approx.: 1'098 DM (1978)
Connections
- Number of inputs:
- Phono MM (Cinch): 2,5 mV / 50 kOhm
2x Tape In (Cinch/DIN): 150 mV / 45 kOhm
- Aux (Cinch): 150 mV / 45 kOhm
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- 2x Tape Out (Cinch/DIN):
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
- 8 Ohm: 2x 60 W (20-20,000 Hz)
- 4 Ohm:
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.05% (at rated power)
- Attenuation Factor:
- Frequency Response:
- Power bandwidth: 10 - 45,000 Hz
- Signal-to-noise ratio: (IHF-A)
- Phono MM: 78 dB
- AUX, Tape: 95 dB
- Stereo Channel Separation:
- Tone control:
- Bass: ±8 dB at 100 Hz
Treble: ±8 dB at 10 kHz
- Loudness: +9 dB (100 Hz)
- High Filter: no
- Low Filter (Subsonic): 15 Hz (6 dB/oct)
- Mute: FM Muting
- Direct/Line-Straight: yes
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 525 - 1605 kHz
- Frequency response: 20 - 15,000 Hz
- Input sensitivity:
- FM: 1.2 µV (IHF)
MW: 15 µV
- Distortion factor: (1 kHz)
- FM: 0.15% (mono), 0.3% (stereo)
- Signal-to-noise ratio: (IHF-A)
FM: 73 dB (mono), 68 dB (stereo) MW: 50 dB
- Channel separation:
- FM: 40 dB (at 1 kHz).
- Selectivity:
- FM: 65 dB
- Equal wave selection:
- FM: 1.0 dB
- Spurious wave selection:
- FM: 72 dB
- Image frequency attenuation:
- FM: 60 dB
- MW: 50 dB
IF attenuation:
- FM: 86 dB
- AM suppression: 60 dB
Comments[edit]
- Other models in the same series:
- Kenwood KR-2090
- Kenwood KR-3090
- Kenwood KR-4070
- Kenwood KR-5030
- Kenwood KR-6030
- Kenwood KR-8010
Pictures[edit]
- Extract from brochure: Kenwood KR-5030