Difference between revisions of "Tandberg TR 1040 P"
(10 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | ''' | + | __NOTOC__ |
+ | == Data == | ||
+ | {{navigation}} | ||
+ | '''General''' | ||
+ | * Manufacturer: [[Tandberg]] | ||
+ | * Model: TR 1040 P (Version TR-1040 A with medium wave, but without VHF preselection buttons) | ||
+ | Type: Receiver | ||
+ | * Year of manufacture: 1974 - 1977 | ||
+ | * Manufactured in: Norway | ||
+ | * Color: silver, wooden case rosewood | ||
+ | * Remote control: no | ||
+ | * Power consumption: | ||
+ | * Dimensions: 440 x 132 x 310 mm (WxHxD). | ||
+ | * Weight: 9,7 kg | ||
+ | * Original price approx.: 1'590 DM | ||
+ | |||
+ | |||
+ | '''Connections''' | ||
+ | * Number of inputs: | ||
+ | ** Phono MM: 1.8 - 7.2 mV adjustable. | ||
+ | ** Tape Play 1, 2, 3: 125 - 500 mV adjustable | ||
+ | AUX: 150 mV / 80 kOhm | ||
+ | ** Antenna FM (75/300 Ohm), MW (300 Ohm) | ||
+ | * Number of outputs: | ||
+ | ** Tape Rec 1, 2, 3: 50 mV | ||
+ | Tape Rec DIN: 50 mV | ||
+ | ** Headphones: 6.3 mm jack | ||
+ | ** 2 pairs of loudspeakers | ||
− | |||
− | + | '''Technical Data''' | |
− | + | ''Amplifier'' | |
+ | * Continuous power | ||
+ | 8 Ohm: 2x 45 W | ||
+ | 4 Ohm: 2x 60 W | ||
+ | * dynamic power | ||
+ | ** 8 Ohm: 2x 75 W | ||
+ | ** 4 Ohm: 2x 100 W | ||
+ | * Total harmonic distortion: 0.2 % (at nominal power) | ||
+ | * Attenuation factor: | ||
+ | * Frequency response: 7 - 70,000 Hz, - 1.5 dB | ||
+ | * Signal-to-noise ratio: | ||
+ | ** Phono MM: 78 dB | ||
+ | ** AUX, Tape: 94 dB | ||
+ | * Stereo channel separation: | ||
+ | ** Phono MM: 60 dB | ||
+ | ** AUX, Tape: 60 dB | ||
+ | * Tone control: | ||
+ | ** Bass: ±10 dB at 100 Hz | ||
+ | Treble: ±10 dB at 10 kHz | ||
+ | * Loudness: +8/+5 dB (100 Hz/10 kHz) | ||
+ | * High Filter: -10 dB at 10 kHz | ||
+ | * Low Filter (Subsonic): -8 dB at 100 Hz | ||
+ | * Mute: FM Muting | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | == | + | ''Tuner'' |
− | + | * Reception: FM | |
+ | * Frequencies: 87.5 - 108 MHz | ||
+ | * Frequency response: 20 - 15,000 Hz (+0.5/-1.5 dB, FM) | ||
+ | * Input sensitivity: 1.7 µV (IHF) | ||
+ | * Distortion factor: 0.3% (mono), 0.5% (stereo) | ||
+ | Signal-to-noise ratio: 70 dB (stereo) | ||
+ | * Channel separation: 40 dB (at 1 kHz) | ||
+ | * Selectivity: 80 dB | ||
+ | * Co-wave selection: 1.3 dB | ||
+ | * Spurious wave selection: 100 dB | ||
+ | * Image frequency attenuation: 90 dB | ||
+ | * IF attenuation: 100 dB | ||
+ | * AM suppression: 90 dB | ||
+ | * Preselection of 5 FM program keys | ||
+ | |||
+ | |||
+ | '''Special Features''' | ||
+ | * Electronic overload protection | ||
+ | * Preselection of 5 VHF program keys | ||
+ | * 2 measuring instruments | ||
+ | * Connection for 3 tapes | ||
+ | * Output level meter | ||
+ | |||
+ | |||
+ | == Remarks == | ||
+ | * Other models of the same series: | ||
+ | ** [[Tandberg TR-200]] | ||
+ | ** [[Tandberg TR 1040 P]] | ||
+ | ** [[Tandberg TR 1055]] | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | * Image: Tandberg TR-1040 | ||
+ | [[File:Tandberg TR-1040-1.jpg]] | ||
+ | |||
+ | |||
+ | == Reports == | ||
− | |||
− | |||
− | |||
== Links == | == Links == | ||
− | [[ | + | |
− | + | [[Category:Receiver]] |
Latest revision as of 08:53, 6 April 2019
Data[edit]
General
- Manufacturer: Tandberg
- Model: TR 1040 P (Version TR-1040 A with medium wave, but without VHF preselection buttons)
Type: Receiver
- Year of manufacture: 1974 - 1977
- Manufactured in: Norway
- Color: silver, wooden case rosewood
- Remote control: no
- Power consumption:
- Dimensions: 440 x 132 x 310 mm (WxHxD).
- Weight: 9,7 kg
- Original price approx.: 1'590 DM
Connections
- Number of inputs:
- Phono MM: 1.8 - 7.2 mV adjustable.
- Tape Play 1, 2, 3: 125 - 500 mV adjustable
AUX: 150 mV / 80 kOhm
- Antenna FM (75/300 Ohm), MW (300 Ohm)
- Number of outputs:
- Tape Rec 1, 2, 3: 50 mV
Tape Rec DIN: 50 mV
- Headphones: 6.3 mm jack
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
8 Ohm: 2x 45 W 4 Ohm: 2x 60 W
- dynamic power
- 8 Ohm: 2x 75 W
- 4 Ohm: 2x 100 W
- Total harmonic distortion: 0.2 % (at nominal power)
- Attenuation factor:
- Frequency response: 7 - 70,000 Hz, - 1.5 dB
- Signal-to-noise ratio:
- Phono MM: 78 dB
- AUX, Tape: 94 dB
- Stereo channel separation:
- Phono MM: 60 dB
- AUX, Tape: 60 dB
- Tone control:
- Bass: ±10 dB at 100 Hz
Treble: ±10 dB at 10 kHz
- Loudness: +8/+5 dB (100 Hz/10 kHz)
- High Filter: -10 dB at 10 kHz
- Low Filter (Subsonic): -8 dB at 100 Hz
- Mute: FM Muting
Tuner
- Reception: FM
- Frequencies: 87.5 - 108 MHz
- Frequency response: 20 - 15,000 Hz (+0.5/-1.5 dB, FM)
- Input sensitivity: 1.7 µV (IHF)
- Distortion factor: 0.3% (mono), 0.5% (stereo)
Signal-to-noise ratio: 70 dB (stereo)
- Channel separation: 40 dB (at 1 kHz)
- Selectivity: 80 dB
- Co-wave selection: 1.3 dB
- Spurious wave selection: 100 dB
- Image frequency attenuation: 90 dB
- IF attenuation: 100 dB
- AM suppression: 90 dB
- Preselection of 5 FM program keys
Special Features
- Electronic overload protection
- Preselection of 5 VHF program keys
- 2 measuring instruments
- Connection for 3 tapes
- Output level meter
Remarks[edit]
- Other models of the same series:
Pictures[edit]
- Image: Tandberg TR-1040